Skip to content

Instantly share code, notes, and snippets.

@x2q

x2q/dmesg

Created October 15, 2012 13:46
Show Gist options
  • Save x2q/3892538 to your computer and use it in GitHub Desktop.
Save x2q/3892538 to your computer and use it in GitHub Desktop.
Download ZIP
Linux/Ubuntu 12.10 on a HP Pavilion dv9000 (dv9780eo)
Raw
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=b4054db7-5b94-4218-a01d-9938f4255bf6 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.51 02/26/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 3071M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f8520-0x000f852f] mapped at [ffff8800000f8520]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbfecffff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfecffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbfecffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x362f0000-0x3716ffff]
[ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfed5b59 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6161 0025F (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed60bb 000A6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed5bd5 004E6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfecffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbfecffff]
[ 0.000000] NODE_DATA [mem 0xbfecc000-0xbfecffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfecffff]
[ 0.000000] On node 0 totalpages: 786015
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12220 pages used for memmap
[ 0.000000] DMA32 zone: 769812 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s83584 r8192 d22912 u1048576
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773725
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=b4054db7-5b94-4218-a01d-9938f4255bf6 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3063984k/3144512k available (6711k kernel code, 452k absent, 80076k reserved, 6459k data, 928k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.747 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.49 BogoMIPS (lpj=8778988)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004055] AppArmor: AppArmor initialized
[ 0.004056] Yama: becoming mindful.
[ 0.004427] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008630] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010053] Mount-cache hash table entries: 256
[ 0.010315] Initializing cgroup subsys cpuacct
[ 0.010321] Initializing cgroup subsys memory
[ 0.010332] Initializing cgroup subsys devices
[ 0.010334] Initializing cgroup subsys freezer
[ 0.010335] Initializing cgroup subsys blkio
[ 0.010337] Initializing cgroup subsys perf_event
[ 0.010371] CPU: Physical Processor ID: 0
[ 0.010372] CPU: Processor Core ID: 0
[ 0.010374] mce: CPU supports 6 MCE banks
[ 0.010383] CPU0: Thermal monitoring enabled (TM2)
[ 0.010387] using mwait in idle threads.
[ 0.012930] ACPI: Core revision 20120320
[ 0.019644] ftrace: allocating 25118 entries in 99 pages
[ 0.028492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068256] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072003] PEBS disabled due to CPU errata.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.080080] Brought up 2 CPUs
[ 0.080084] Total of 2 processors activated (8778.98 BogoMIPS).
[ 0.081976] devtmpfs: initialized
[ 0.081976] EVM: security.selinux
[ 0.081976] EVM: security.SMACK64
[ 0.081976] EVM: security.capability
[ 0.084027] PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfee2fff] (77824 bytes)
[ 0.084794] dummy:
[ 0.084830] RTC time: 14:50:10, date: 10/15/12
[ 0.084866] NET: Registered protocol family 16
[ 0.084902] Trying to unpack rootfs image as initramfs...
[ 0.085052] ACPI: bus type pci registered
[ 0.085111] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.085114] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.102045] PCI: Using configuration type 1 for base access
[ 0.103153] bio: create slab <bio-0> at 0
[ 0.103267] ACPI: Added _OSI(Module Device)
[ 0.103269] ACPI: Added _OSI(Processor Device)
[ 0.103271] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.103273] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.104650] ACPI: EC: Look up EC in DSDT
[ 0.104803] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.104809] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae2da78), AE_NOT_FOUND (20120320/psparse-536)
[ 0.106945] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107920] ACPI: SSDT 00000000bfed6a1d 0027A (v01 HP 30CB 00003000 INTL 20061109)
[ 0.108261] ACPI: Dynamic OEM Table Load:
[ 0.108265] ACPI: SSDT (null) 0027A (v01 HP 30CB 00003000 INTL 20061109)
[ 0.108374] ACPI: SSDT 00000000bfed63c0 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.108688] ACPI: Dynamic OEM Table Load:
[ 0.108691] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.108879] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.109200] ACPI: Dynamic OEM Table Load:
[ 0.109203] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.109277] ACPI: SSDT 00000000bfed6998 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.109595] ACPI: Dynamic OEM Table Load:
[ 0.109598] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.109853] ACPI: Interpreter enabled
[ 0.109857] ACPI: (supports S0 S3 S4 S5)
[ 0.109875] ACPI: Using IOAPIC for interrupt routing
[ 0.116328] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.116492] ACPI: No dock devices found.
[ 0.116497] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.116783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.117300] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.117303] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.117306] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.117309] pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.117312] pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.117314] pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.117317] pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.117320] pci_root PNP0A08:00: >host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.117356] PCI host bridge to bus 0000:00
[ 0.117359] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.117361] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.117363] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.117365] pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.117368] pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.117370] pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.117372] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.117374] pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.117385] pci 0000:00:00.0: >[8086:2a00] type 00 class 0x060000
[ 0.117437] pci 0000:00:01.0: >[8086:2a01] type 01 class 0x060400
[ 0.117484] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.117541] pci 0000:00:1a.0: >[8086:2834] type 00 class 0x0c0300
[ 0.117601] pci 0000:00:1a.0: >reg 20: [io 0x1800-0x181f]
[ 0.117647] pci 0000:00:1a.1: >[8086:2835] type 00 class 0x0c0300
[ 0.117706] pci 0000:00:1a.1: >reg 20: [io 0x1820-0x183f]
[ 0.117767] pci 0000:00:1a.7: >[8086:283a] type 00 class 0x0c0320
[ 0.117794] pci 0000:00:1a.7: >reg 10: [mem 0xf8404800-0xf8404bff]
[ 0.117909] pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
[ 0.117945] pci 0000:00:1b.0: >[8086:284b] type 00 class 0x040300
[ 0.117969] pci 0000:00:1b.0: >reg 10: [mem 0xf8400000-0xf8403fff 64bit]
[ 0.118079] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.118113] pci 0000:00:1c.0: >[8086:283f] type 01 class 0x060400
[ 0.118228] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.118269] pci 0000:00:1c.1: >[8086:2841] type 01 class 0x060400
[ 0.118384] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[ 0.118424] pci 0000:00:1c.5: >[8086:2849] type 01 class 0x060400
[ 0.118540] pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold
[ 0.118574] pci 0000:00:1d.0: >[8086:2830] type 00 class 0x0c0300
[ 0.118635] pci 0000:00:1d.0: >reg 20: [io 0x1840-0x185f]
[ 0.118681] pci 0000:00:1d.1: >[8086:2831] type 00 class 0x0c0300
[ 0.118743] pci 0000:00:1d.1: >reg 20: [io 0x1860-0x187f]
[ 0.118788] pci 0000:00:1d.2: >[8086:2832] type 00 class 0x0c0300
[ 0.118847] pci 0000:00:1d.2: >reg 20: [io 0x1880-0x189f]
[ 0.118907] pci 0000:00:1d.7: >[8086:2836] type 00 class 0x0c0320
[ 0.118932] pci 0000:00:1d.7: >reg 10: [mem 0xf8404c00-0xf8404fff]
[ 0.119048] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
[ 0.119076] pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
[ 0.119179] pci 0000:00:1f.0: >[8086:2815] type 00 class 0x060100
[ 0.119289] pci 0000:00:1f.0: >quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.119295] pci 0000:00:1f.0: >quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.119303] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.119362] pci 0000:00:1f.1: >[8086:2850] type 00 class 0x01018a
[ 0.119381] pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007]
[ 0.119394] pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003]
[ 0.119407] pci 0000:00:1f.1: >reg 18: [io 0x0000-0x0007]
[ 0.119420] pci 0000:00:1f.1: >reg 1c: [io 0x0000-0x0003]
[ 0.119433] pci 0000:00:1f.1: >reg 20: [io 0x18a0-0x18af]
[ 0.119491] pci 0000:00:1f.2: >[8086:2829] type 00 class 0x010601
[ 0.119519] pci 0000:00:1f.2: >reg 10: [io 0x18d8-0x18df]
[ 0.119532] pci 0000:00:1f.2: >reg 14: [io 0x18cc-0x18cf]
[ 0.119545] pci 0000:00:1f.2: >reg 18: [io 0x18d0-0x18d7]
[ 0.119557] pci 0000:00:1f.2: >reg 1c: [io 0x18c8-0x18cb]
[ 0.119570] pci 0000:00:1f.2: >reg 20: [io 0x18e0-0x18ff]
[ 0.119582] pci 0000:00:1f.2: >reg 24: [mem 0xf8404000-0xf84047ff]
[ 0.119651] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.119676] pci 0000:00:1f.3: >[8086:283e] type 00 class 0x0c0500
[ 0.119694] pci 0000:00:1f.3: >reg 10: [mem 0x00000000-0x000000ff]
[ 0.119737] pci 0000:00:1f.3: >reg 20: [io 0x1c00-0x1c1f]
[ 0.119832] pci 0000:01:00.0: >[10de:0425] type 00 class 0x030000
[ 0.119852] pci 0000:01:00.0: >reg 10: [mem 0xce000000-0xceffffff]
[ 0.119874] pci 0000:01:00.0: >reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.119895] pci 0000:01:00.0: >reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.119910] pci 0000:01:00.0: >reg 24: [io 0x2000-0x207f]
[ 0.119925] pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.120044] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.120048] pci 0000:00:01.0: > bridge window [io 0x2000-0x2fff]
[ 0.120052] pci 0000:00:01.0: > bridge window [mem 0xcc000000-0xceffffff]
[ 0.120057] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.120155] pci 0000:02:00.0: >[8086:4229] type 00 class 0x028000
[ 0.120198] pci 0000:02:00.0: >reg 10: [mem 0xf4000000-0xf4001fff 64bit]
[ 0.120408] pci 0000:02:00.0: >PME# supported from D0 D3hot D3cold
[ 0.128037] pci 0000:00:1c.0: >PCI bridge to [bus 02-03]
[ 0.128043] pci 0000:00:1c.0: > bridge window [io 0x4000-0x7fff]
[ 0.128049] pci 0000:00:1c.0: > bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.128057] pci 0000:00:1c.0: > bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.128122] pci 0000:00:1c.1: >PCI bridge to [bus 04-05]
[ 0.128128] pci 0000:00:1c.1: > bridge window [io 0x8000-0xbfff]
[ 0.128133] pci 0000:00:1c.1: > bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.128140] pci 0000:00:1c.1: > bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.128236] pci 0000:06:00.0: >[10ec:8168] type 00 class 0x020000
[ 0.128261] pci 0000:06:00.0: >reg 10: [io 0xc000-0xc0ff]
[ 0.128304] pci 0000:06:00.0: >reg 18: [mem 0xf8000000-0xf8000fff 64bit]
[ 0.128352] pci 0000:06:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.128462] pci 0000:06:00.0: >supports D1 D2
[ 0.128464] pci 0000:06:00.0: >PME# supported from D1 D2 D3hot D3cold
[ 0.128500] pci 0000:06:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.128512] pci 0000:00:1c.5: >PCI bridge to [bus 06-06]
[ 0.128518] pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff]
[ 0.128523] pci 0000:00:1c.5: > bridge window [mem 0xf8000000-0xf80fffff]
[ 0.128595] pci 0000:07:09.0: >[1180:0832] type 00 class 0x0c0010
[ 0.128611] pci 0000:07:09.0: >proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.128613] pci 0000:07:09.0: >MMC cards are now supported by standard SDHCI controller
[ 0.128630] pci 0000:07:09.0: >reg 10: [mem 0xf8100000-0xf81007ff]
[ 0.128733] pci 0000:07:09.0: >supports D1 D2
[ 0.128735] pci 0000:07:09.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128762] pci 0000:07:09.1: >[1180:0822] type 00 class 0x080500
[ 0.128784] pci 0000:07:09.1: >reg 10: [mem 0xf8100800-0xf81008ff]
[ 0.128888] pci 0000:07:09.1: >supports D1 D2
[ 0.128891] pci 0000:07:09.1: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128917] pci 0000:07:09.2: >[1180:0592] type 00 class 0x088000
[ 0.128941] pci 0000:07:09.2: >reg 10: [mem 0xf8101000-0xf81010ff]
[ 0.129045] pci 0000:07:09.2: >supports D1 D2
[ 0.129047] pci 0000:07:09.2: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129072] pci 0000:07:09.3: >[1180:0852] type 00 class 0x088000
[ 0.129095] pci 0000:07:09.3: >reg 10: [mem 0xf8101400-0xf81014ff]
[ 0.129200] pci 0000:07:09.3: >supports D1 D2
[ 0.129202] pci 0000:07:09.3: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.129256] pci 0000:00:1e.0: >PCI bridge to [bus 07-07] (subtractive decode)
[ 0.129265] pci 0000:00:1e.0: > bridge window [mem 0xf8100000-0xf81fffff]
[ 0.129273] pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.129276] pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.129278] pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.129280] pci 0000:00:1e.0: > bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.129283] pci 0000:00:1e.0: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.129285] pci 0000:00:1e.0: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.129287] pci 0000:00:1e.0: > bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.129289] pci 0000:00:1e.0: > bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.129325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.129455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.129504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.129545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.129580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.129637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.129684] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.129687] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.129688] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.133761] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.133810] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.133856] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.133902] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.133949] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.133995] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.134040] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.134086] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.134209] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134214] vgaarb: loaded
[ 0.134215] vgaarb: bridge control possible 0000:01:00.0
[ 0.134420] SCSI subsystem initialized
[ 0.134484] libata version 3.00 loaded.
[ 0.134505] ACPI: bus type usb registered
[ 0.134526] usbcore: registered new interface driver usbfs
[ 0.134538] usbcore: registered new interface driver hub
[ 0.134570] usbcore: registered new device driver usb
[ 0.134652] PCI: Using ACPI for IRQ routing
[ 0.146052] PCI: pci_cache_line_size set to 64 bytes
[ 0.146184] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.146187] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[ 0.146316] NetLabel: Initializing
[ 0.146318] NetLabel: domain hash size = 128
[ 0.146319] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.146331] NetLabel: unlabeled traffic allowed by default
[ 0.146404] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.146409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.146414] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.152308] Switching to clocksource hpet
[ 0.160637] AppArmor: AppArmor Filesystem Enabled
[ 0.160674] pnp: PnP ACPI init
[ 0.160700] ACPI: bus type pnp registered
[ 0.161432] pnp 00:00: >[bus 00-ff]
[ 0.161436] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.161438] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.161440] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.161443] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.161445] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.161447] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.161449] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.161451] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.161454] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.161456] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.161458] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.161460] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.161462] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.161464] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.161467] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.161469] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.161471] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.161473] pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
[ 0.161475] pnp 00:00: >[mem 0xf0000000-0xfebfffff window]
[ 0.161481] pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
[ 0.161561] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.161634] pnp 00:01: >[mem 0xfed1c000-0xfed1ffff]
[ 0.161636] pnp 00:01: >[mem 0xfed14000-0xfed17fff]
[ 0.161638] pnp 00:01: >[mem 0xfed18000-0xfed18fff]
[ 0.161640] pnp 00:01: >[mem 0xfed19000-0xfed19fff]
[ 0.161642] pnp 00:01: >[mem 0xe0000000-0xefffffff]
[ 0.161645] pnp 00:01: >[mem 0xfed20000-0xfed3ffff]
[ 0.161647] pnp 00:01: >[mem 0xfed40000-0xfed44fff]
[ 0.161649] pnp 00:01: >[mem 0xfed45000-0xfed8ffff]
[ 0.161713] system 00:01: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.161716] system 00:01: >[mem 0xfed14000-0xfed17fff] has been reserved
[ 0.161719] system 00:01: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.161722] system 00:01: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.161724] system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
[ 0.161727] system 00:01: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.161730] system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
[ 0.161732] system 00:01: >[mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.161736] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161928] pnp 00:02: >[io 0x0000-0x001f]
[ 0.161930] pnp 00:02: >[io 0x0081-0x0091]
[ 0.161932] pnp 00:02: >[io 0x0093-0x009f]
[ 0.161934] pnp 00:02: >[io 0x00c0-0x00df]
[ 0.161937] pnp 00:02: >[dma 4]
[ 0.161980] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.161989] pnp 00:03: >[mem 0xff000000-0xffffffff]
[ 0.162031] pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.162095] pnp 00:04: >[mem 0xfed00000-0xfed003ff]
[ 0.162155] system 00:04: >[mem 0xfed00000-0xfed003ff] has been reserved
[ 0.162159] system 00:04: >Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.162170] pnp 00:05: >[io 0x00f0]
[ 0.162183] pnp 00:05: >[irq 13]
[ 0.162226] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.162238] pnp 00:06: >[io 0x002e-0x002f]
[ 0.162240] pnp 00:06: >[io 0x004e-0x004f]
[ 0.162242] pnp 00:06: >[io 0x0061]
[ 0.162244] pnp 00:06: >[io 0x0063]
[ 0.162246] pnp 00:06: >[io 0x0065]
[ 0.162247] pnp 00:06: >[io 0x0067]
[ 0.162249] pnp 00:06: >[io 0x0080]
[ 0.162251] pnp 00:06: >[io 0x0092]
[ 0.162253] pnp 00:06: >[io 0x00b2-0x00b3]
[ 0.162255] pnp 00:06: >[io 0x0380-0x0383]
[ 0.162257] pnp 00:06: >[io 0x0680-0x069f]
[ 0.162259] pnp 00:06: >[io 0x0800-0x080f]
[ 0.162261] pnp 00:06: >[io 0x1000-0x107f]
[ 0.162263] pnp 00:06: >[io 0x1180-0x11bf]
[ 0.162265] pnp 00:06: >[io 0x1640-0x164f]
[ 0.162267] pnp 00:06: >[io 0xfe00]
[ 0.162338] system 00:06: >[io 0x0380-0x0383] has been reserved
[ 0.162341] system 00:06: >[io 0x0680-0x069f] has been reserved
[ 0.162343] system 00:06: >[io 0x0800-0x080f] has been reserved
[ 0.162346] system 00:06: >[io 0x1000-0x107f] has been reserved
[ 0.162349] system 00:06: >[io 0x1180-0x11bf] has been reserved
[ 0.162351] system 00:06: >[io 0x1640-0x164f] has been reserved
[ 0.162354] system 00:06: >[io 0xfe00] has been reserved
[ 0.162358] system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162378] pnp 00:07: >[io 0x06a0-0x06af]
[ 0.162380] pnp 00:07: >[io 0x06b0-0x06ff]
[ 0.162441] system 00:07: >[io 0x06a0-0x06af] has been reserved
[ 0.162444] system 00:07: >[io 0x06b0-0x06ff] has been reserved
[ 0.162447] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162456] pnp 00:08: >[io 0x0070-0x0077]
[ 0.162463] pnp 00:08: >[irq 8]
[ 0.162503] pnp 00:08: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.162563] pnp 00:09: >[io 0x0060]
[ 0.162565] pnp 00:09: >[io 0x0064]
[ 0.162571] pnp 00:09: >[irq 1]
[ 0.162620] pnp 00:09: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.162633] pnp 00:0a: >[irq 12]
[ 0.162685] pnp 00:0a: >Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
[ 0.162705] pnp: PnP ACPI: found 11 devices
[ 0.162706] ACPI: ACPI bus type pnp unregistered
[ 0.168918] pci 0000:00:1c.5: >bridge window [mem 0x00100000-0x001fffff pref] to [bus 06-06] add_size 200000
[ 0.168943] pci 0000:00:1c.5: >res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.168950] pci 0000:00:1c.5: >BAR 15: assigned [mem 0xc0000000-0xc02fffff pref]
[ 0.168954] pci 0000:00:1f.3: >BAR 0: assigned [mem 0xc0300000-0xc03000ff]
[ 0.168962] pci 0000:01:00.0: >BAR 6: can't assign mem pref (size 0x20000)
[ 0.168965] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.168968] pci 0000:00:01.0: > bridge window [io 0x2000-0x2fff]
[ 0.168972] pci 0000:00:01.0: > bridge window [mem 0xcc000000-0xceffffff]
[ 0.168976] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168981] pci 0000:00:1c.0: >PCI bridge to [bus 02-03]
[ 0.168984] pci 0000:00:1c.0: > bridge window [io 0x4000-0x7fff]
[ 0.168991] pci 0000:00:1c.0: > bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.168996] pci 0000:00:1c.0: > bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.169004] pci 0000:00:1c.1: >PCI bridge to [bus 04-05]
[ 0.169007] pci 0000:00:1c.1: > bridge window [io 0x8000-0xbfff]
[ 0.169014] pci 0000:00:1c.1: > bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.169018] pci 0000:00:1c.1: > bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.169027] pci 0000:06:00.0: >BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.169030] pci 0000:00:1c.5: >PCI bridge to [bus 06-06]
[ 0.169033] pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff]
[ 0.169039] pci 0000:00:1c.5: > bridge window [mem 0xf8000000-0xf80fffff]
[ 0.169044] pci 0000:00:1c.5: > bridge window [mem 0xc0000000-0xc02fffff pref]
[ 0.169053] pci 0000:00:1e.0: >PCI bridge to [bus 07-07]
[ 0.169059] pci 0000:00:1e.0: > bridge window [mem 0xf8100000-0xf81fffff]
[ 0.169112] pci 0000:00:1e.0: >setting latency timer to 64
[ 0.169117] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.169119] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.169122] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.169124] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.169126] pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.169128] pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.169130] pci_bus 0000:00: >resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.169133] pci_bus 0000:00: >resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.169135] pci_bus 0000:01: >resource 0 [io 0x2000-0x2fff]
[ 0.169137] pci_bus 0000:01: >resource 1 [mem 0xcc000000-0xceffffff]
[ 0.169140] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.169142] pci_bus 0000:02: >resource 0 [io 0x4000-0x7fff]
[ 0.169144] pci_bus 0000:02: >resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.169147] pci_bus 0000:02: >resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.169149] pci_bus 0000:04: >resource 0 [io 0x8000-0xbfff]
[ 0.169151] pci_bus 0000:04: >resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.169153] pci_bus 0000:04: >resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.169156] pci_bus 0000:06: >resource 0 [io 0xc000-0xcfff]
[ 0.169158] pci_bus 0000:06: >resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.169160] pci_bus 0000:06: >resource 2 [mem 0xc0000000-0xc02fffff pref]
[ 0.169163] pci_bus 0000:07: >resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.169165] pci_bus 0000:07: >resource 4 [io 0x0000-0x0cf7]
[ 0.169167] pci_bus 0000:07: >resource 5 [io 0x0d00-0xffff]
[ 0.169169] pci_bus 0000:07: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.169171] pci_bus 0000:07: >resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.169173] pci_bus 0000:07: >resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.169176] pci_bus 0000:07: >resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.169178] pci_bus 0000:07: >resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.169180] pci_bus 0000:07: >resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.169225] NET: Registered protocol family 2
[ 0.169373] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.170622] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.176244] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.177021] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.177023] TCP: reno registered
[ 0.177036] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.177103] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.177237] NET: Registered protocol family 1
[ 0.177521] pci 0000:01:00.0: >Boot video device
[ 0.177545] PCI: CLS 64 bytes, default 64
[ 0.177586] Simple Boot Flag at 0x35 set to 0x1
[ 0.178001] audit: initializing netlink socket (disabled)
[ 0.178013] type=2000 audit(1350312610.176:1): initialized
[ 0.200360] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.202247] VFS: Disk quotas dquot_6.5.2
[ 0.202294] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.202812] fuse init (API version 7.19)
[ 0.202888] msgmni has been set to 5984
[ 0.203219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.203247] io scheduler noop registered
[ 0.203249] io scheduler deadline registered (default)
[ 0.203275] io scheduler cfq registered
[ 0.203424] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.203532] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[ 0.203665] pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
[ 0.203798] pcieport 0000:00:1c.5: >irq 43 for MSI/MSI-X
[ 0.203896] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.203915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.203969] intel_idle: does not run on family 6 model 15
[ 0.204704] ACPI: AC Adapter [ACAD] (on-line)
[ 0.204776] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.204782] ACPI: Power Button [PWRB]
[ 0.204819] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.204825] ACPI: Sleep Button [SLPB]
[ 0.204867] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.205161] ACPI: Lid Switch [LID]
[ 0.205219] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.205222] ACPI: Power Button [PWRF]
[ 0.205293] ACPI: Requesting acpi_cpufreq
[ 0.373907] Freeing initrd memory: 14848k freed
[ 0.383219] Monitor-Mwait will be used to enter C-1 state
[ 0.383243] Monitor-Mwait will be used to enter C-2 state
[ 0.383253] Monitor-Mwait will be used to enter C-3 state
[ 0.383262] Marking TSC unstable due to TSC halts in idle
[ 0.383283] ACPI: acpi_idle registered with cpuidle
[ 0.387057] [Firmware Bug]: Invalid critical threshold (0)
[ 0.387805] thermal LNXTHERM:00: >registered as thermal_zone0
[ 0.387807] ACPI: Thermal Zone [THR1] (48 C)
[ 0.387826] ACPI: Battery Slot [BAT0] (battery present)
[ 0.387860] GHES: HEST is not enabled!
[ 0.387984] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.389613] Linux agpgart interface v0.103
[ 0.391504] brd: module loaded
[ 0.392322] loop: module loaded
[ 0.392433] ahci 0000:00:1f.2: >version 3.0
[ 0.392496] ahci 0000:00:1f.2: >irq 44 for MSI/MSI-X
[ 0.392569] ahci 0000:00:1f.2: >AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.392573] ahci 0000:00:1f.2: >flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.392578] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.393046] scsi0 : ahci
[ 0.393126] scsi1 : ahci
[ 0.393192] scsi2 : ahci
[ 0.393299] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
[ 0.393302] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
[ 0.393305] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
[ 0.393351] ata_piix 0000:00:1f.1: >version 2.13
[ 0.393412] ata_piix 0000:00:1f.1: >setting latency timer to 64
[ 0.393676] scsi3 : ata_piix
[ 0.393742] scsi4 : ata_piix
[ 0.394063] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.394066] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.394358] Fixed MDIO Bus: probed
[ 0.394403] tun: Universal TUN/TAP device driver, 1.6
[ 0.394404] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.394555] PPP generic driver version 2.4.2
[ 0.394599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.394635] ehci_hcd 0000:00:1a.7: >setting latency timer to 64
[ 0.394639] ehci_hcd 0000:00:1a.7: >EHCI Host Controller
[ 0.394646] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
[ 0.394680] ehci_hcd 0000:00:1a.7: >debug port 1
[ 0.398584] ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
[ 0.398602] ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xf8404800
[ 0.408019] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
[ 0.408043] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.408046] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.408048] usb usb1: >Product: EHCI Host Controller
[ 0.408050] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.408052] usb usb1: >SerialNumber: 0000:00:1a.7
[ 0.408171] hub 1-0:1.0: >USB hub found
[ 0.408176] hub 1-0:1.0: >4 ports detected
[ 0.408254] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[ 0.408258] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[ 0.408263] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
[ 0.408292] ehci_hcd 0000:00:1d.7: >debug port 1
[ 0.412190] ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
[ 0.412205] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xf8404c00
[ 0.424019] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[ 0.424035] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.424038] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.424040] usb usb2: >Product: EHCI Host Controller
[ 0.424042] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.424044] usb usb2: >SerialNumber: 0000:00:1d.7
[ 0.424139] hub 2-0:1.0: >USB hub found
[ 0.424144] hub 2-0:1.0: >6 ports detected
[ 0.424217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.424235] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.424256] uhci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.424260] uhci_hcd 0000:00:1a.0: >UHCI Host Controller
[ 0.424265] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.424304] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x00001800
[ 0.424341] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.424344] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.424346] usb usb3: >Product: UHCI Host Controller
[ 0.424348] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.424350] usb usb3: >SerialNumber: 0000:00:1a.0
[ 0.424452] hub 3-0:1.0: >USB hub found
[ 0.424456] hub 3-0:1.0: >2 ports detected
[ 0.424527] uhci_hcd 0000:00:1a.1: >setting latency timer to 64
[ 0.424531] uhci_hcd 0000:00:1a.1: >UHCI Host Controller
[ 0.424536] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
[ 0.424573] uhci_hcd 0000:00:1a.1: >irq 21, io base 0x00001820
[ 0.424609] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.424611] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.424613] usb usb4: >Product: UHCI Host Controller
[ 0.424616] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.424618] usb usb4: >SerialNumber: 0000:00:1a.1
[ 0.424702] hub 4-0:1.0: >USB hub found
[ 0.424706] hub 4-0:1.0: >2 ports detected
[ 0.424775] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.424779] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[ 0.424784] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 5
[ 0.424813] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001840
[ 0.424851] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.424854] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.424856] usb usb5: >Product: UHCI Host Controller
[ 0.424858] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.424860] usb usb5: >SerialNumber: 0000:00:1d.0
[ 0.424945] hub 5-0:1.0: >USB hub found
[ 0.424949] hub 5-0:1.0: >2 ports detected
[ 0.425017] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[ 0.425021] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[ 0.425026] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 6
[ 0.425064] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x00001860
[ 0.425100] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.425102] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.425105] usb usb6: >Product: UHCI Host Controller
[ 0.425107] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.425109] usb usb6: >SerialNumber: 0000:00:1d.1
[ 0.425201] hub 6-0:1.0: >USB hub found
[ 0.425205] hub 6-0:1.0: >2 ports detected
[ 0.425270] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[ 0.425274] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[ 0.425279] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 7
[ 0.425307] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x00001880
[ 0.425344] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.425347] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.425349] usb usb7: >Product: UHCI Host Controller
[ 0.425351] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.425353] usb usb7: >SerialNumber: 0000:00:1d.2
[ 0.425437] hub 7-0:1.0: >USB hub found
[ 0.425441] hub 7-0:1.0: >2 ports detected
[ 0.425552] usbcore: registered new interface driver libusual
[ 0.425595] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.446805] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.446811] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.446926] mousedev: PS/2 mouse device common for all mice
[ 0.451306] rtc_cmos 00:08: >RTC can wake from S4
[ 0.451462] rtc_cmos 00:08: >rtc core: registered rtc_cmos as rtc0
[ 0.451494] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.451569] device-mapper: uevent: version 1.0.3
[ 0.451633] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.451682] cpuidle: using governor ladder
[ 0.451759] cpuidle: using governor menu
[ 0.451761] EFI Variables Facility v0.08 2004-May-17
[ 0.451987] ashmem: initialized
[ 0.452165] TCP: cubic registered
[ 0.452281] NET: Registered protocol family 10
[ 0.452497] NET: Registered protocol family 17
[ 0.452507] Key type dns_resolver registered
[ 0.452722] PM: Hibernation image not present or could not be loaded.
[ 0.452735] registered taskstats version 1
[ 0.455183] Key type trusted registered
[ 0.455770] ACPI: Battery Slot [BAT0] (battery present)
[ 0.457274] Key type encrypted registered
[ 0.459661] Magic number: 0:424:839
[ 0.459801] rtc_cmos 00:08: >setting system clock to 2012-10-15 14:50:11 UTC (1350312611)
[ 0.460277] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.460279] EDD information not available.
[ 0.484510] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.580872] ata4.00: ATAPI: TOSHIBA DVDW/HD SD-L802B, HP05, max MWDMA2
[ 0.596747] ata4.00: configured for MWDMA2
[ 0.712204] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.712231] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.712264] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.713129] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.713136] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 0.713141] ata1.00: 488397168 sectors, multi 16: LBA48
[ 0.713274] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.713278] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 0.713280] ata3.00: 488397168 sectors, multi 16: LBA48
[ 0.714256] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.714264] ata1.00: configured for UDMA/100
[ 0.714402] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.714406] ata3.00: configured for UDMA/100
[ 0.714418] scsi 0:0:0:0: >Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 0.714553] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[ 0.714555] sd 0:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.714601] sd 0:0:0:0: >[sda] Write Protect is off
[ 0.714604] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 0.714666] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.755218] sda: sda1 sda2 < sda5 >
[ 0.755772] sd 0:0:0:0: >[sda] Attached SCSI disk
[ 0.755882] scsi 2:0:0:0: >Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 0.756022] sd 2:0:0:0: >Attached scsi generic sg1 type 0
[ 0.756049] sd 2:0:0:0: >[sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.756138] sd 2:0:0:0: >[sdb] Write Protect is off
[ 0.756141] sd 2:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
[ 0.756200] sd 2:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.773515] sdb:
[ 0.773761] sd 2:0:0:0: >[sdb] Attached SCSI disk
[ 0.783766] scsi 3:0:0:0: >CD-ROM TOSHIBA DVDW/HD SD-L802B HP05 PQ: 0 ANSI: 5
[ 0.802881] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.802885] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.803068] sr 3:0:0:0: >Attached scsi CD-ROM sr0
[ 0.803222] sr 3:0:0:0: >Attached scsi generic sg2 type 5
[ 0.804532] Freeing unused kernel memory: 928k freed
[ 0.804847] Write protecting the kernel read-only data: 12288k
[ 0.809242] Freeing unused kernel memory: 1472k freed
[ 0.812907] Freeing unused kernel memory: 1124k freed
[ 0.829137] udevd[101]: starting version 175
[ 0.848047] usb 2-4: >new high-speed USB device number 3 using ehci_hcd
[ 0.914011] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.914260] r8169 0000:06:00.0: >irq 45 for MSI/MSI-X
[ 0.914599] r8169 0000:06:00.0: >eth0: RTL8168b/8111b at 0xffffc90000646000, 00:1e:68:27:b1:00, XID 18000000 IRQ 45
[ 0.914603] r8169 0000:06:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 0.922084] sdhci: Secure Digital Host Controller Interface driver
[ 0.922087] sdhci: Copyright(c) Pierre Ossman
[ 0.922341] sdhci-pci 0000:07:09.1: >SDHCI controller found [1180:0822] (rev 22)
[ 0.923375] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.923389] mmc0: no vmmc regulator found
[ 0.924390] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.927967] Registered led device: mmc0::
[ 0.962080] mmc0: SDHCI controller on PCI [0000:07:09.1] using DMA
[ 0.990284] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.993383] usb 2-4: >New USB device found, idVendor=04f2, idProduct=b023
[ 0.993390] usb 2-4: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 0.993394] usb 2-4: >Product: HP Webcam
[ 0.993398] usb 2-4: >Manufacturer: Chicony Electronics Co., Ltd.
[ 0.993403] usb 2-4: >SerialNumber: SN0001
[ 1.028093] firewire_ohci 0000:07:09.0: >added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.050287] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.110247] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.135356] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.135359] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.170339] sdhci-pci 0000:07:09.1: >Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.344057] usb 6-1: >new full-speed USB device number 2 using uhci_hcd
[ 1.505138] usb 6-1: >New USB device found, idVendor=08ff, idProduct=2580
[ 1.505144] usb 6-1: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.505149] usb 6-1: >Product: Fingerprint Sensor
[ 1.528213] firewire_core 0000:07:09.0: created device fw0: GUID 00241b0013acc100, S400
[ 1.572499] EXT4-fs (sda1): recovery complete
[ 1.575363] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.744088] usb 7-2: >new full-speed USB device number 2 using uhci_hcd
[ 1.920383] usb 7-2: >New USB device found, idVendor=03f0, idProduct=171d
[ 1.920390] usb 7-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.920395] usb 7-2: >Product: HP Integrated Module
[ 1.920399] usb 7-2: >Manufacturer: Broadcom Corp
[ 14.910179] Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k
[ 14.919078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.956728] udevd[365]: starting version 175
[ 15.024583] lp: driver loaded but no devices found
[ 15.079490] cfg80211: Calling CRDA to update world regulatory domain
[ 15.079645] ACPI Warning: 0x0000000000001060-0x000000000000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 15.079651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.079653] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 15.079657] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 15.079661] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.079665] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 15.079669] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.079670] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.119587] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 15.119593] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 15.119719] iwl4965 0000:02:00.0: >Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 15.131245] wmi: Mapper loaded
[ 15.135983] acpi device:05: >registered as cooling_device2
[ 15.136036] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.136113] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 15.159056] iwl4965 0000:02:00.0: >device EEPROM VER=0x36, CALIB=0x5
[ 15.172150] r592: driver successfully loaded
[ 15.173849] nvidia: module license 'NVIDIA' taints kernel.
[ 15.173855] Disabling lock debugging due to kernel taint
[ 15.184089] iwl4965 0000:02:00.0: >Tunable channels: 13 802.11bg, 19 802.11a channels
[ 15.184258] iwl4965 0000:02:00.0: >irq 46 for MSI/MSI-X
[ 15.246929] r852: Non dma capable device detected, dma disabled
[ 15.246947] r852: driver loaded successfully
[ 15.248362] EXT4-fs (sda1): re-mounted. Opts: commit=600,errors=remount-ro
[ 15.270891] nvidia 0000:01:00.0: >power state changed by ACPI to D0
[ 15.270899] nvidia 0000:01:00.0: >power state changed by ACPI to D0
[ 15.270919] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.271140] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
[ 15.305942] init: flush-early-job-log main process (631) terminated with status 1
[ 15.313757] Linux video capture interface: v2.00
[ 15.314201] Bluetooth: Core ver 2.16
[ 15.314218] NET: Registered protocol family 31
[ 15.314220] Bluetooth: HCI device and connection manager initialized
[ 15.314223] Bluetooth: HCI socket layer initialized
[ 15.314225] Bluetooth: L2CAP socket layer initialized
[ 15.314229] Bluetooth: SCO socket layer initialized
[ 15.318973] usbcore: registered new interface driver btusb
[ 15.351634] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
[ 15.364766] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.364770] Bluetooth: BNEP filters: protocol multicast
[ 15.365560] snd_hda_intel 0000:00:1b.0: >irq 47 for MSI/MSI-X
[ 15.365812] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6
[ 15.365939] usbcore: registered new interface driver uvcvideo
[ 15.365941] USB Video Class driver (1.1.1)
[ 15.367322] Bluetooth: RFCOMM TTY layer initialized
[ 15.367328] Bluetooth: RFCOMM socket layer initialized
[ 15.367329] Bluetooth: RFCOMM ver 1.11
[ 15.439692] ppdev: user-space parallel port driver
[ 15.478787] type=1400 audit(1350305426.512:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=730 comm="apparmor_parser"
[ 15.479291] type=1400 audit(1350305426.512:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=730 comm="apparmor_parser"
[ 15.527732] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.531762] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.531855] microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb3
[ 15.544603] init: failsafe main process (737) killed by TERM signal
[ 15.637800] type=1400 audit(1350305426.672:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=846 comm="apparmor_parser"
[ 15.641055] type=1400 audit(1350305426.676:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser"
[ 15.641397] type=1400 audit(1350305426.676:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=845 comm="apparmor_parser"
[ 15.642496] type=1400 audit(1350305426.676:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=846 comm="apparmor_parser"
[ 15.647316] r8169 0000:06:00.0: >eth0: link down
[ 15.649849] type=1400 audit(1350305426.684:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=848 comm="apparmor_parser"
[ 15.650194] type=1400 audit(1350305426.684:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=848 comm="apparmor_parser"
[ 15.653801] type=1400 audit(1350305426.688:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
[ 15.654219] type=1400 audit(1350305426.688:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
[ 15.654749] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.656887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.740782] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 15.759434] cfg80211: World regulatory domain updated:
[ 15.759438] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.759441] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.759443] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.759445] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.759447] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.759449] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.776069] usb 7-2: >USB disconnect, device number 2
[ 15.808069] iwl4965 0000:02:00.0: >loaded firmware version 228.61.2.24
[ 15.808294] Registered led device: phy0-led
[ 15.808325] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 15.841427] microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb3
[ 15.853363] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.853614] zram: Creating 2 devices ...
[ 15.880953] ieee80211 phy0: >Selected rate control algorithm 'iwl-4965-rs'
[ 15.919637] Adding 770588k swap on /dev/zram0. Priority:5 extents:1 across:770588k SS
[ 15.920191] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 15.932083] Adding 770588k swap on /dev/zram1. Priority:5 extents:1 across:770588k SS
[ 16.142839] init: udev-fallback-graphics main process (1123) terminated with status 1
[ 16.233095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.237269] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.608358] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 16.614841] psmouse serio1: >synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
[ 16.674757] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[ 16.685262] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0
[ 16.726653] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 17.888247] NVRM: GPU at 0000:01:00: GPU-44634cc3-c361-d3e7-030a-01c1599a7405
[ 20.367258] wlan0: authenticate with 4c:e6:76:c4:51:ac
[ 20.377221] wlan0: send auth to 4c:e6:76:c4:51:ac (try 1/3)
[ 20.379336] wlan0: authenticated
[ 20.392065] wlan0: associate with 4c:e6:76:c4:51:ac (try 1/3)
[ 20.395448] wlan0: RX AssocResp from 4c:e6:76:c4:51:ac (capab=0x411 status=0 aid=1)
[ 20.417276] wlan0: associated
[ 20.417823] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.417882] cfg80211: Calling CRDA for country: DK
[ 20.422002] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422006] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422008] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422010] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422012] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422014] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422016] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422018] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422020] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422022] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422024] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422026] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422027] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422029] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422031] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422033] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422035] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422037] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422039] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422041] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422042] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422044] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422046] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422048] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422050] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422052] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422054] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422056] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422058] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422060] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422061] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422063] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422065] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422067] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422069] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422071] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422073] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422075] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422076] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422078] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422080] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422082] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 20.422084] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422086] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422088] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422090] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422091] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422093] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422095] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422097] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422099] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422101] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422103] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422105] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422107] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422109] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422110] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422112] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422114] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422116] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422118] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422120] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422122] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[ 20.422124] cfg80211: 5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A mBi, 2700 mBm)
[ 20.422126] cfg80211: Regulatory domain changed to country: DK
[ 20.422128] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.422130] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 20.422132] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 20.422134] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 20.422136] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 43.335850] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 43.557513] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[ 43.568615] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0
[ 739.088207] audit_printk_skb: 39 callbacks suppressed
Raw
dmidecode
# dmidecode 2.11
SMBIOS 2.4 present.
19 structures occupying 731 bytes.
Table at 0x000DC010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Hewlett-Packard
Version: F.51
Release Date: 02/26/2008
Address: 0xE6F30
Runtime Size: 102608 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Hewlett-Packard
Product Name: HP Pavilion dv9700 Notebook PC
Version: Rev 1
Serial Number: XXXXXXXXXX
UUID: XX4E46XX-X039-X531-X243-XXXXXXXXXX00
Wake-up Type: Power Switch
SKU Number: KL018EA#UUW
Family: 103C_5335KV
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Quanta
Product Name: 30CB
Version: 79.29
Serial Number: None
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Quanta
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000204
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: FB 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 11
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 Duo CPU T7500
Voltage: 3.3 V
External Clock: 800 MHz
Max Speed: 2200 MHz
Current Speed: 2200 MHz
Status: Populated, Enabled
Upgrade: Socket 478
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 4096 kB
Maximum Size: 4096 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 1
Type: 64-bit PCI Express
Current Usage: Available
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 2
Type: 64-bit PCI Express
Current Usage: Available
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Hot-plug devices are supported
Handle 0x0009, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot 6
Type: 64-bit PCI Express
Current Usage: Available
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x000A, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description:
Handle 0x000B, DMI type 11, 5 bytes
OEM Strings
String 1: $HP$
String 2: LOC#UUW
String 3: ABS 70/71 79 7A 7B 7C
Handle 0x000C, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: DIMM 1
Bank Locator: Bank 0,1
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 1
Locator: DIMM 2
Bank Locator: Bank 2,3
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000BFFFFFFF
Range Size: 3 GB
Physical Array Handle: 0x000C
Partition Width: 2
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000D
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: 2
Interleave Position: 2
Interleaved Data Depth: 2
Handle 0x0011, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0012, DMI type 127, 4 bytes
End Of Table
Raw
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8600M GS] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Raw
lsusb
Bus 002 Device 003: ID 04f2:b023 Chicony Electronics Co., Ltd Gateway USB 2.0 Webcam
Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment