Created
August 27, 2019 01:15
-
-
Save xc-racer99/95ae81830d0d57ccb915c692f01c654e to your computer and use it in GitHub Desktop.
Maemo Leste on Aries
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| jon@jon-hp-6570b:~$ cd Downloads | |
| jon@jon-hp-6570b:~/Downloads$ xzcat maemo-leste-1.0-armhf-droid4-20190227.img.xz | sudo dd of=/dev/mmcblk0 | |
| [sudo] password for jon: | |
| 2738176+0 records in | |
| 2738176+0 records out | |
| 1401946112 bytes (1.4 GB, 1.3 GiB) copied, 21.2891 s, 65.9 MB/s | |
| jon@jon-hp-6570b:~/Downloads$ sudo sync | |
| jon@jon-hp-6570b:~/Downloads$ xzcat maemo-leste-1.0-armhf-droid4-20190227.img.xz | sudo dd of=/dev/mmcblk0 status=progress && sudo sync | |
| 1400738304 bytes (1.4 GB, 1.3 GiB) copied, 758 s, 1.8 MB/s | |
| 2738176+0 records in | |
| 2738176+0 records out | |
| 1401946112 bytes (1.4 GB, 1.3 GiB) copied, 776.773 s, 1.8 MB/s | |
| jon@jon-hp-6570b:~/Downloads$ ssh pi@raspberrypi-clear | |
| Linux raspberrypi-clear 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l | |
| The programs included with the Debian GNU/Linux system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
| permitted by applicable law. | |
| Last login: Mon Aug 26 11:55:23 2019 from 192.168.1.28 | |
| pi@raspberrypi-clear:~ $ picocom -b 115200 /dev/ttyAMA0 | |
| picocom v1.7 | |
| port is : /dev/ttyAMA0 | |
| flowcontrol : none | |
| baudrate is : 115200 | |
| parity is : none | |
| databits are : 8 | |
| escape is : C-a | |
| local echo is : no | |
| noinit is : no | |
| noreset is : no | |
| nolock is : no | |
| send_cmd is : sz -vv | |
| receive_cmd is : rz -vv | |
| imap is : | |
| omap is : | |
| emap is : crcrlf,delbs, | |
| Terminal ready | |
| U-Boot 2018.09-00066-g0832e2efb7fe-dirty (Aug 25 2019 - 19:36:08 -0700) | |
| CPU: S5PC110 @ 800 MHz | |
| Model: Samsung Galaxy S Fascinate 4G based on S5PC110 | |
| Board: Aries | |
| DRAM: 464 MiB | |
| NAND: Muxed OneNAND 1024MB 1.8V 16-bit (0x60) | |
| OneNAND version = 0x0031 | |
| Chip support all block unlock | |
| Chip has 4KiB pagesize | |
| Scanning device for bad blocks | |
| OneNAND: 1 GiB | |
| MMC: SAMSUNG SDHCI: 0 | |
| Loading Environment from OneNAND... OK | |
| In: gpio-keys | |
| Out: vidconsole | |
| Err: vidconsole | |
| Net: Net Initialization Skipped | |
| No ethernet found. | |
| Autoboot in 0 seconds | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 401 bytes read in 59 ms (5.9 KiB/s) | |
| Ignoring unknown command: ui | |
| Ignoring malformed menu command: autoboot | |
| Samsung Galaxy S Boot Options | |
| * Maemo Leste | |
| Press UP/DOWN to move, ENTER to select | |
| 0: Maemo Leste | |
| Retrieving file: /zImage | |
| 3941632 bytes read in 1415 ms (2.7 MiB/s) | |
| append: ubi.mtd=ubi mtdparts=b0600000.onenand:256k@25856k(uboot-env),10240k(boot),10240k(recovery),980480k(ubi) console=ttySAC2,115200 ro rootwait rootfstype=ext4 root=/dev/mmcblk1p2 | |
| Retrieving file: /s5pv210-fascinate4g.dtb | |
| 47614 bytes read in 78 ms (595.7 KiB/s) | |
| Kernel image @ 0x32000000 [ 0x000000 - 0x3c2500 ] | |
| ## Flattened Device Tree blob at 33000000 | |
| Booting using the fdt blob at 0x33000000 | |
| Loading Device Tree to 34ff1000, end 34fff9fd ... OK | |
| Starting kernel ... | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 5.3.0-rc3-00044-ge892af22b3ef (jon@jon-hp-6570b) (gcc version 8.3.0 (Debian 8.3.0-2)) #180 PREEMPT Mon Aug 26 15:22:08 PDT 2019 | |
| CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| OF: fdt: Machine model: Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210 | |
| Memory policy: Data cache writeback | |
| Reserved memory: created DMA memory pool at 0x43000000, size 32 MiB | |
| OF: reserved mem: initialized node region@43000000, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x51000000, size 32 MiB | |
| OF: reserved mem: initialized node region@51000000, compatible id shared-dma-pool | |
| CPU: All CPU(s) started in SVC mode. | |
| Built 1 zonelists, mobility grouping on. Total pages: 101120 | |
| Kernel command line: ubi.mtd=ubi mtdparts=b0600000.onenand:256k@25856k(uboot-env),10240k(boot),10240k(recovery),980480k(ubi) console=ttySAC2,115200 ro rootwait rootfstype=ext4 root=/dev/mmcblk1p2 | |
| Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 396092K/409600K available (6144K kernel code, 188K rwdata, 1384K rodata, 1024K init, 242K bss, 13508K reserved, 0K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| rcu: Preemptible hierarchical RCU implementation. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| random: get_random_bytes called from start_kernel+0x304/0x488 with crng_init=0 | |
| S5PV210 clocks: mout_apll = 800000000, mout_mpll = 667000000 | |
| mout_epll = 80000000, mout_vpll = 54000000 | |
| sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 64392313329ns | |
| clocksource: samsung_clocksource_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57309158834 ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable | |
| Setting up static identity map for 0x30100000 - 0x30100060 | |
| rcu: Hierarchical SRCU implementation. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| VUSB_1.1V: Bringing 1200000uV into 1100000-1100000uV | |
| VADC_3.3V: Bringing 1800000uV into 3300000-3300000uV | |
| CAM_AF_3.0V: Bringing 2800000uV into 3000000-3000000uV | |
| CAM_SENSOR_CORE_1.2V: Bringing 1800000uV into 1200000-1200000uV | |
| VGA_AVDD_2.8V: Bringing 3300000uV into 2800000-2800000uV | |
| i2c-gpio i2c-gpio-0: using lines 141 (SDA) and 144 (SCL) | |
| i2c-gpio i2c-gpio-1: using lines 182 (SDA) and 181 (SCL) | |
| i2c-gpio i2c-gpio-2: using lines 133 (SDA) and 134 (SCL) | |
| i2c-gpio i2c-gpio-3: using lines 137 (SDA) and 138 (SCL) | |
| i2c-gpio i2c-gpio-6: using lines 139 (SDA) and 140 (SCL) | |
| s3c-i2c e1800000.i2c: slave address 0x10 | |
| s3c-i2c e1800000.i2c: bus frequency set to 65 KHz | |
| s3c-i2c e1800000.i2c: i2c-0: S3C I2C adapter | |
| s3c-i2c e1a00000.i2c: slave address 0x10 | |
| s3c-i2c e1a00000.i2c: bus frequency set to 378 KHz | |
| s3c-i2c e1a00000.i2c: i2c-2: S3C I2C adapter | |
| mc: Linux media interface: v0.10 | |
| videodev: Linux video capture interface: v2.00 | |
| fsa9480 7-0025: dev1: 0x0, dev2: 0x4 | |
| clocksource: Switched to clocksource samsung_clocksource_timer | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
| TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| TCP: Hash tables configured (established 4096 bind 4096) | |
| UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
| UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
| NET: Registered protocol family 1 | |
| Initialise system trusted keyrings | |
| workingset: timestamp_bits=30 max_order=17 bucket_order=0 | |
| romfs: ROMFS MTD (C) 2007 Red Hat, Inc. | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| dma-pl330 e0900000.dma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 e0900000.dma: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| dma-pl330 e0a00000.dma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 e0a00000.dma: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| dma-pl330 fa200000.mdma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 fa200000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| e2900000.serial: ttySAC0 at MMIO 0xe2900000 (irq = 58, base_baud = 0) is a S3C6400/10 | |
| serial serial0: tty port ttySAC0 registered | |
| e2900400.serial: ttySAC1 at MMIO 0xe2900400 (irq = 59, base_baud = 0) is a S3C6400/10 | |
| e2900800.serial: ttySAC2 at MMIO 0xe2900800 (irq = 60, base_baud = 0) is a S3C6400/10 | |
| printk: console [ttySAC2] enabled | |
| exynos4-fb f8000000.fimd: failed to get system register. | |
| brd: module loaded | |
| loop: module loaded | |
| Muxed OneNAND 1024MB 1.8V 16-bit (0x60) | |
| OneNAND version = 0x0031 | |
| Scanning device for bad blocks | |
| random: fast init done | |
| 4 cmdlinepart partitions found on MTD device b0600000.onenand | |
| Creating 4 MTD partitions on "b0600000.onenand": | |
| 0x000001940000-0x000001980000 : "uboot-env" | |
| 0x000001980000-0x000002380000 : "boot" | |
| 0x000002380000-0x000002d80000 : "recovery" | |
| 0x000002d80000-0x00003eb00000 : "ubi" | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-exynos: EHCI EXYNOS driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-exynos: OHCI EXYNOS driver | |
| input: tm2-touchkey as /devices/platform/i2c-gpio-2/i2c-10/10-0020/input/input0 | |
| max17040 9-0036: MAX17040 Fuel-Gauge Ver 0x3 | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| s3c-sdhci eb100000.sdhci: clock source 0: mmc_busclk.0 (133400000 Hz) | |
| s3c-sdhci eb100000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) | |
| s3c-sdhci eb100000.sdhci: allocated mmc-pwrseq | |
| mmc0: SDHCI controller on samsung-hsmmc [eb100000.sdhci] using ADMA | |
| s3c-sdhci eb200000.sdhci: clock source 0: mmc_busclk.0 (133400000 Hz) | |
| s3c-sdhci eb200000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) | |
| s3c-sdhci eb200000.sdhci: Got CD GPIO | |
| mmc1: SDHCI controller on samsung-hsmmc [eb200000.sdhci] using ADMA | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| bma180 5-0038: mounting matrix not found: using identity... | |
| mmc0: queuing unknown CIS tuple 0x80 (50 bytes) | |
| NET: Registered protocol family 10 | |
| Segment Routing with IPv6 | |
| sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| Loading compiled-in X.509 certificates | |
| mmc0: queuing unknown CIS tuple 0x80 (7 bytes) | |
| exynos4-fb f8000000.fimd: failed to get system register. | |
| [drm] Exynos DRM: using f8000000.fimd device for DMA mapping operations | |
| exynos-drm exynos-drm: bound f8000000.fimd (ops 0xc0732c58) | |
| exynos-rotator fa300000.rotator: The exynos rotator has been probed successfully | |
| exynos-drm exynos-drm: bound fa300000.rotator (ops 0xc0733570) | |
| [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [drm] No driver support for vblank timestamp query. | |
| mmc0: queuing unknown CIS tuple 0x80 (3 bytes) | |
| mmc0: new SDIO card at address 0001 | |
| mmc1: new high speed SDHC card at address 0001 | |
| mmcblk1: mmc1:0001 SD8GB 7.32 GiB | |
| mmcblk1: p1 p2 | |
| Console: switching to colour frame buffer device 60x50 | |
| exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device | |
| [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 | |
| ubi0: attaching mtd3 | |
| ubi0: fixable bit-flip detected at PEB 1366 | |
| ubi0: scanning is finished | |
| ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 80 | |
| ubi0: attached mtd3 (name "ubi", size 957 MiB) | |
| ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | |
| ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | |
| ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | |
| ubi0: good PEBs: 3830, bad PEBs: 0, corrupted PEBs: 0 | |
| ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | |
| ubi0: max/mean erase counter: 1995/4, WL threshold: 4096, image sequence number: 2943374792 | |
| ubi0: available PEBs: 0, total reserved PEBs: 3830, PEBs reserved for bad PEB handling: 38 | |
| ubi0: background thread "ubi_bgt0d" started, PID 67 | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input1 | |
| hctosys: unable to open rtc device (rtc0) | |
| vibrator-en: disabling | |
| vga_isp_sys: disabling | |
| VUSB_1.1V: disabling | |
| VUSB_3.3V: disabling | |
| vddarm: disabling | |
| vddint: disabling | |
| SAFEOUT1: disabling | |
| EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 1024K | |
| Run /sbin/init as init process | |
| INIT: version 2.88 booting | |
| OpenRC 0.23 is starting up Linux 5.3.0-rc3-00044-ge892af22b3ef (armv7l) | |
| * Mounting /proc ... | |
| [ ok ] | |
| * Mounting /run ... | |
| * /run/openrc: creating directory | |
| * /run/lock: creating directory | |
| * /run/lock: correcting owner | |
| * Caching service dependencies ... | |
| Error: hwclock is the name of a real and virtual service. | |
| [ ok ] | |
| * Caching service dependencies ... | |
| Error: hwclock is the name of a real and virtual service. | |
| [ ok ] | |
| * Clock skew detected with `/etc/init.d/zram' | |
| * Adjusting mtime of `/run/openrc/deptree' to Wed Feb 27 19:14:27 2019 | |
| [....] Starting the hotplug events dispatcher: udevdudevd[589]: starting version 3.2.2 | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| udevd[590]: starting eudev-3.2.2 | |
| . ok | |
| [....] Synthesizing the initial hotplug events...max8998-rtc max8998-rtc: registered as rtc0 | |
| max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc | |
| input: pwm-vibrator as /devices/platform/pwm-vibrator/input/input2 | |
| dwc2 ec000000.hsotg: Configuration mismatch. dr_mode forced to host | |
| Bluetooth: Core ver 2.22 | |
| NET: Registered protocol family 31 | |
| Bluetooth: HCI device and connection manager initialized | |
| atmel_mxt_ts 2-004a: Family: 128 Variant: 1 Firmware V1.6.AB Objects: 17 | |
| dwc2 ec000000.hsotg: dwc2_check_params: Invalid parameter besl=1 | |
| Bluetooth: HCI socket layer initialized | |
| Bluetooth: L2CAP socket layer initialized | |
| Bluetooth: SCO socket layer initialized | |
| videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ ok videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| dwc2 ec000000.hsotg: DWC OTG Controller | |
| dwc2 ec000000.hsotg: new USB bus registered, assigned bus number 1 | |
| Bluetooth: HCI UART driver ver 2.3 | |
| Bluetooth: HCI UART protocol H4 registered | |
| done. | |
| dwc2 ec000000.hsotg: irq 72, io mem 0xec000000 | |
| hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator | |
| Bluetooth: HCI UART protocol Broadcom registered | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator | |
| [....] Waiting for /dev to be fully populated...atmel_mxt_ts 2-004a: Direct firmware load for maxtouch.cfg failed with error -2 | |
| atmel_mxt_ts 2-004a: Touchscreen size X1023Y1023 | |
| input: Atmel maXTouch Touchscreen as /devices/platform/soc/e1a00000.i2c/i2c-2/2-004a/input/input3 | |
| cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| dwc2 ec000000.hsotg: Overcurrent change detected | |
| dwc2 ec000000.hsotg: Overcurrent change detected | |
| platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| cfg80211: failed to load regulatory.db | |
| brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4329-sdio for chip BCM4329/3 | |
| brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4329-sdio.bin failed with error -2 | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 5 at lib/refcount.c:156 kthread_stop+0x14/0x94 | |
| refcount_t: increment on 0; use-after-free. | |
| Modules linked in: brcmfmac sha256_generic hci_uart btbcm cfg80211 brcmutil bluetooth videobuf2_common phy_exynos_usb2 ecdh_generic ecc atmel_mxt_ts pwm_vibra rtc_max8998 | |
| CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.3.0-rc3-00044-ge892af22b3ef #180 | |
| Hardware name: Samsung S5PC110/S5PV210-based board | |
| Workqueue: events request_firmware_work_func | |
| [<c010d644>] (unwind_backtrace) from [<c010b058>] (show_stack+0x10/0x14) | |
| [<c010b058>] (show_stack) from [<c0117cf0>] (__warn+0xd8/0xf0) | |
| [<c0117cf0>] (__warn) from [<c01178a4>] (warn_slowpath_fmt+0x48/0x6c) | |
| [<c01178a4>] (warn_slowpath_fmt) from [<c01354e4>] (kthread_stop+0x14/0x94) | |
| [<c01354e4>] (kthread_stop) from [<bf1e4f58>] (brcmf_sdio_remove+0x2c/0x108 [brcmfmac]) | |
| [<bf1e4f58>] (brcmf_sdio_remove [brcmfmac]) from [<bf1e5a78>] (brcmf_sdiod_remove+0x20/0xb8 [brcmfmac]) | |
| [<bf1e5a78>] (brcmf_sdiod_remove [brcmfmac]) from [<bf1e5d78>] (brcmf_ops_sdio_remove+0x34/0x5c [brcmfmac]) | |
| [<bf1e5d78>] (brcmf_ops_sdio_remove [brcmfmac]) from [<c0554bf0>] (sdio_bus_remove+0x30/0xec) | |
| [<c0554bf0>] (sdio_bus_remove) from [<c0467460>] (device_release_driver_internal+0xdc/0x1ac) | |
| [<c0467460>] (device_release_driver_internal) from [<bf1e2314>] (brcmf_sdio_firmware_callback+0x44/0x728 [brcmfmac]) | |
| [<bf1e2314>] (brcmf_sdio_firmware_callback [brcmfmac]) from [<bf1dac88>] (brcmf_fw_request_done+0xf0/0x110 [brcmfmac]) | |
| [<bf1dac88>] (brcmf_fw_request_done [brcmfmac]) from [<c047a4f0>] (request_firmware_work_func+0x50/0x8c) | |
| [<c047a4f0>] (request_firmware_work_func) from [<c012efa4>] (process_one_work+0x20c/0x430) | |
| [<c012efa4>] (process_one_work) from [<c012f218>] (worker_thread+0x50/0x634) | |
| [<c012f218>] (worker_thread) from [<c0134924>] (kthread+0x13c/0x144) | |
| [<c0134924>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) | |
| Exception stack(0xe7471fb0 to 0xe7471ff8) | |
| 1fa0: 00000000 00000000 00000000 00000000 | |
| 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 | |
| ---[ end trace d1ff580e3c868710 ]--- | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 5 at kernel/kthread.c:75 kthread_stop+0x90/0x94 | |
| Modules linked in: brcmfmac sha256_generic hci_uart btbcm cfg80211 brcmutil bluetooth videobuf2_common phy_exynos_usb2 ecdh_generic ecc atmel_mxt_ts pwm_vibra rtc_max8998 | |
| CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G W 5.3.0-rc3-00044-ge892af22b3ef #180 | |
| Hardware name: Samsung S5PC110/S5PV210-based board | |
| Workqueue: events request_firmware_work_func | |
| [<c010d644>] (unwind_backtrace) from [<c010b058>] (show_stack+0x10/0x14) | |
| [<c010b058>] (show_stack) from [<c0117cf0>] (__warn+0xd8/0xf0) | |
| [<c0117cf0>] (__warn) from [<c0117d48>] (warn_slowpath_null+0x40/0x48) | |
| [<c0117d48>] (warn_slowpath_null) from [<c0135560>] (kthread_stop+0x90/0x94) | |
| [<c0135560>] (kthread_stop) from [<bf1e4f58>] (brcmf_sdio_remove+0x2c/0x108 [brcmfmac]) | |
| [<bf1e4f58>] (brcmf_sdio_remove [brcmfmac]) from [<bf1e5a78>] (brcmf_sdiod_remove+0x20/0xb8 [brcmfmac]) | |
| [<bf1e5a78>] (brcmf_sdiod_remove [brcmfmac]) from [<bf1e5d78>] (brcmf_ops_sdio_remove+0x34/0x5c [brcmfmac]) | |
| [<bf1e5d78>] (brcmf_ops_sdio_remove [brcmfmac]) from [<c0554bf0>] (sdio_bus_remove+0x30/0xec) | |
| [<c0554bf0>] (sdio_bus_remove) from [<c0467460>] (device_release_driver_internal+0xdc/0x1ac) | |
| [<c0467460>] (device_release_driver_internal) from [<bf1e2314>] (brcmf_sdio_firmware_callback+0x44/0x728 [brcmfmac]) | |
| [<bf1e2314>] (brcmf_sdio_firmware_callback [brcmfmac]) from [<bf1dac88>] (brcmf_fw_request_done+0xf0/0x110 [brcmfmac]) | |
| [<bf1dac88>] (brcmf_fw_request_done [brcmfmac]) from [<c047a4f0>] (request_firmware_work_func+0x50/0x8c) | |
| [<c047a4f0>] (request_firmware_work_func) from [<c012efa4>] (process_one_work+0x20c/0x430) | |
| [<c012efa4>] (process_one_work) from [<c012f218>] (worker_thread+0x50/0x634) | |
| [<c012f218>] (worker_thread) from [<c0134924>] (kthread+0x13c/0x144) | |
| [<c0134924>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) | |
| Exception stack(0xe7471fb0 to 0xe7471ff8) | |
| 1fa0: 00000000 00000000 00000000 00000000 | |
| 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 | |
| ---[ end trace d1ff580e3c868711 ]--- | |
| 8<--- cut here --- | |
| Unable to handle kernel paging request at virtual address b6fce298 | |
| pgd = (ptrval) | |
| [b6fce298] *pgd=00000000 | |
| Internal error: Oops: 17 [#1] PREEMPT ARM | |
| Modules linked in: brcmfmac sha256_generic hci_uart btbcm cfg80211 brcmutil bluetooth videobuf2_common phy_exynos_usb2 ecdh_generic ecc atmel_mxt_ts pwm_vibra rtc_max8998 | |
| CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G W 5.3.0-rc3-00044-ge892af22b3ef #180 | |
| Hardware name: Samsung S5PC110/S5PV210-based board | |
| Workqueue: events request_firmware_work_func | |
| PC is at kthread_stop+0x2c/0x94 | |
| LR is at warn_slowpath_null+0x40/0x48 | |
| pc : [<c01354fc>] lr : [<c0117d48>] psr: 600f0193 | |
| sp : e7471e48 ip : 00000000 fp : c0a094ac | |
| r10: fffffffe r9 : 00000000 r8 : e69f5d40 | |
| r7 : e6bfec08 r6 : e7621dc8 r5 : b6fce298 r4 : e7621dc0 | |
| r3 : 00000200 r2 : 600f0113 r1 : c0a2f378 r0 : 00000000 | |
| Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none | |
| Control: 10c5387d Table: 55b78019 DAC: 00000051 | |
| Process kworker/0:0 (pid: 5, stack limit = 0x(ptrval)) | |
| Stack: (0xe7471e48 to 0xe7472000) | |
| 1e40: e5565800 00000000 e5565400 bf1e4f58 e5565400 00000000 | |
| 1e60: e5565400 bf1e5a78 e6bfec00 e69f5780 e5565400 bf1e5d78 e6bfec08 e6bfec00 | |
| 1e80: bf1efc2c c0554bf0 e6bfec08 00000000 bf1efc2c c0467460 e6424000 c0a03008 | |
| 1ea0: e5565400 bf1e2314 7fffffff e7401e40 e7fccea0 bf1dac6c e69f5d40 00008846 | |
| 1ec0: ffffe000 fffffffe c0a094ac 337d361a 00000001 e6424000 fffffffe e69f5d74 | |
| 1ee0: 00000002 e69f5d40 00000000 e6424044 c0a094ac bf1dac88 c0a03008 00000000 | |
| 1f00: e6424040 c0a03008 e7aca200 00000000 c0a094ac c047a4f0 00000000 00000003 | |
| 1f20: 00000000 337d361a e6424040 e6424040 e7417600 c012efa4 00000008 ffffe000 | |
| 1f40: e7417600 c0a094ac e7417614 00000008 ffffe000 c0a0eea0 c0a094c0 c012f218 | |
| 1f60: 00000000 e7428f00 e7428dc0 00000000 e7470000 e7417600 c012f1c8 e745feb8 | |
| 1f80: e7428f18 c0134924 00000000 e7428dc0 c01347e8 00000000 00000000 00000000 | |
| 1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 | |
| 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 | |
| [<c01354fc>] (kthread_stop) from [<bf1e4f58>] (brcmf_sdio_remove+0x2c/0x108 [brcmfmac]) | |
| [<bf1e4f58>] (brcmf_sdio_remove [brcmfmac]) from [<bf1e5a78>] (brcmf_sdiod_remove+0x20/0xb8 [brcmfmac]) | |
| [<bf1e5a78>] (brcmf_sdiod_remove [brcmfmac]) from [<bf1e5d78>] (brcmf_ops_sdio_remove+0x34/0x5c [brcmfmac]) | |
| [<bf1e5d78>] (brcmf_ops_sdio_remove [brcmfmac]) from [<c0554bf0>] (sdio_bus_remove+0x30/0xec) | |
| [<c0554bf0>] (sdio_bus_remove) from [<c0467460>] (device_release_driver_internal+0xdc/0x1ac) | |
| [<c0467460>] (device_release_driver_internal) from [<bf1e2314>] (brcmf_sdio_firmware_callback+0x44/0x728 [brcmfmac]) | |
| [<bf1e2314>] (brcmf_sdio_firmware_callback [brcmfmac]) from [<bf1dac88>] (brcmf_fw_request_done+0xf0/0x110 [brcmfmac]) | |
| [<bf1dac88>] (brcmf_fw_request_done [brcmfmac]) from [<c047a4f0>] (request_firmware_work_func+0x50/0x8c) | |
| [<c047a4f0>] (request_firmware_work_func) from [<c012efa4>] (process_one_work+0x20c/0x430) | |
| [<c012efa4>] (process_one_work) from [<c012f218>] (worker_thread+0x50/0x634) | |
| [<c012f218>] (worker_thread) from [<c0134924>] (kthread+0x13c/0x144) | |
| [<c0134924>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) | |
| Exception stack(0xe7471fb0 to 0xe7471ff8) | |
| 1fa0: 00000000 00000000 00000000 00000000 | |
| 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 | |
| Code: 0a000017 e5945270 e10f2000 f10c0080 (e5953000) | |
| ---[ end trace d1ff580e3c868712 ]--- | |
| Bluetooth: hci0: BCM: Reset failed (-110) | |
| U-Boot 2018.09-00066-g0832e2efb7fe-dirty (Aug 25 2019 - 19:36:08 -0700) | |
| CPU: S5PC110 @ 800 MHz | |
| Model: Samsung Galaxy S Fascinate 4G based on S5PC110 | |
| Board: Aries | |
| DRAM: 464 MiB | |
| NAND: Muxed OneNAND 1024MB 1.8V 16-bit (0x60) | |
| OneNAND version = 0x0031 | |
| Chip support all block unlock | |
| Chip has 4KiB pagesize | |
| Scanning device for bad blocks | |
| OneNAND: 1 GiB | |
| MMC: SAMSUNG SDHCI: 0 | |
| Loading Environment from OneNAND... OK | |
| In: gpio-keys | |
| Out: vidconsole | |
| Err: vidconsole | |
| Net: Net Initialization Skipped | |
| No ethernet found. | |
| Autoboot in 0 seconds | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 401 bytes read in 59 ms (5.9 KiB/s) | |
| Ignoring unknown command: ui | |
| Ignoring malformed menu command: autoboot | |
| Samsung Galaxy S Boot Options | |
| * Maemo Leste | |
| Press UP/DOWN to move, ENTER to select | |
| 0: Maemo Leste | |
| Retrieving file: /zImage | |
| 3941632 bytes read in 1415 ms (2.7 MiB/s) | |
| append: ubi.mtd=ubi mtdparts=b0600000.onenand:256k@25856k(uboot-env),10240k(boot),10240k(recovery),980480k(ubi) console=ttySAC2,115200 ro rootwait rootfstype=ext4 root=/dev/mmcblk1p2 | |
| Retrieving file: /s5pv210-fascinate4g.dtb | |
| 47614 bytes read in 78 ms (595.7 KiB/s) | |
| Kernel image @ 0x32000000 [ 0x000000 - 0x3c2500 ] | |
| ## Flattened Device Tree blob at 33000000 | |
| Booting using the fdt blob at 0x33000000 | |
| Loading Device Tree to 34ff1000, end 34fff9fd ... OK | |
| Starting kernel ... | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 5.3.0-rc3-00044-ge892af22b3ef (jon@jon-hp-6570b) (gcc version 8.3.0 (Debian 8.3.0-2)) #180 PREEMPT Mon Aug 26 15:22:08 PDT 2019 | |
| CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| OF: fdt: Machine model: Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210 | |
| Memory policy: Data cache writeback | |
| Reserved memory: created DMA memory pool at 0x43000000, size 32 MiB | |
| OF: reserved mem: initialized node region@43000000, compatible id shared-dma-pool | |
| Reserved memory: created DMA memory pool at 0x51000000, size 32 MiB | |
| OF: reserved mem: initialized node region@51000000, compatible id shared-dma-pool | |
| CPU: All CPU(s) started in SVC mode. | |
| Built 1 zonelists, mobility grouping on. Total pages: 101120 | |
| Kernel command line: ubi.mtd=ubi mtdparts=b0600000.onenand:256k@25856k(uboot-env),10240k(boot),10240k(recovery),980480k(ubi) console=ttySAC2,115200 ro rootwait rootfstype=ext4 root=/dev/mmcblk1p2 | |
| Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 396092K/409600K available (6144K kernel code, 188K rwdata, 1384K rodata, 1024K init, 242K bss, 13508K reserved, 0K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| rcu: Preemptible hierarchical RCU implementation. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| VIC @(ptrval): id 0x00041192, vendor 0x41 | |
| random: get_random_bytes called from start_kernel+0x304/0x488 with crng_init=0 | |
| S5PV210 clocks: mout_apll = 800000000, mout_mpll = 667000000 | |
| mout_epll = 80000000, mout_vpll = 54000000 | |
| sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 64392313329ns | |
| clocksource: samsung_clocksource_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57309158834 ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable | |
| Setting up static identity map for 0x30100000 - 0x30100060 | |
| rcu: Hierarchical SRCU implementation. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| VUSB_1.1V: Bringing 1200000uV into 1100000-1100000uV | |
| VADC_3.3V: Bringing 1800000uV into 3300000-3300000uV | |
| CAM_AF_3.0V: Bringing 2800000uV into 3000000-3000000uV | |
| CAM_SENSOR_CORE_1.2V: Bringing 1800000uV into 1200000-1200000uV | |
| VGA_AVDD_2.8V: Bringing 3300000uV into 2800000-2800000uV | |
| i2c-gpio i2c-gpio-0: using lines 141 (SDA) and 144 (SCL) | |
| i2c-gpio i2c-gpio-1: using lines 182 (SDA) and 181 (SCL) | |
| i2c-gpio i2c-gpio-2: using lines 133 (SDA) and 134 (SCL) | |
| i2c-gpio i2c-gpio-3: using lines 137 (SDA) and 138 (SCL) | |
| i2c-gpio i2c-gpio-6: using lines 139 (SDA) and 140 (SCL) | |
| s3c-i2c e1800000.i2c: slave address 0x10 | |
| s3c-i2c e1800000.i2c: bus frequency set to 65 KHz | |
| s3c-i2c e1800000.i2c: i2c-0: S3C I2C adapter | |
| s3c-i2c e1a00000.i2c: slave address 0x10 | |
| s3c-i2c e1a00000.i2c: bus frequency set to 378 KHz | |
| s3c-i2c e1a00000.i2c: i2c-2: S3C I2C adapter | |
| mc: Linux media interface: v0.10 | |
| videodev: Linux video capture interface: v2.00 | |
| fsa9480 7-0025: dev1: 0x0, dev2: 0x4 | |
| clocksource: Switched to clocksource samsung_clocksource_timer | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
| TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear) | |
| TCP: Hash tables configured (established 4096 bind 4096) | |
| UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
| UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
| NET: Registered protocol family 1 | |
| Initialise system trusted keyrings | |
| workingset: timestamp_bits=30 max_order=17 bucket_order=0 | |
| romfs: ROMFS MTD (C) 2007 Red Hat, Inc. | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| dma-pl330 e0900000.dma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 e0900000.dma: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| dma-pl330 e0a00000.dma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 e0a00000.dma: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| dma-pl330 fa200000.mdma: Loaded driver for PL330 DMAC-41330 | |
| dma-pl330 fa200000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| e2900000.serial: ttySAC0 at MMIO 0xe2900000 (irq = 58, base_baud = 0) is a S3C6400/10 | |
| serial serial0: tty port ttySAC0 registered | |
| e2900400.serial: ttySAC1 at MMIO 0xe2900400 (irq = 59, base_baud = 0) is a S3C6400/10 | |
| e2900800.serial: ttySAC2 at MMIO 0xe2900800 (irq = 60, base_baud = 0) is a S3C6400/10 | |
| printk: console [ttySAC2] enabled | |
| exynos4-fb f8000000.fimd: failed to get system register. | |
| brd: module loaded | |
| loop: module loaded | |
| Muxed OneNAND 1024MB 1.8V 16-bit (0x60) | |
| OneNAND version = 0x0031 | |
| Scanning device for bad blocks | |
| random: fast init done | |
| 4 cmdlinepart partitions found on MTD device b0600000.onenand | |
| Creating 4 MTD partitions on "b0600000.onenand": | |
| 0x000001940000-0x000001980000 : "uboot-env" | |
| 0x000001980000-0x000002380000 : "boot" | |
| 0x000002380000-0x000002d80000 : "recovery" | |
| 0x000002d80000-0x00003eb00000 : "ubi" | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-exynos: EHCI EXYNOS driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-exynos: OHCI EXYNOS driver | |
| input: tm2-touchkey as /devices/platform/i2c-gpio-2/i2c-10/10-0020/input/input0 | |
| max17040 9-0036: MAX17040 Fuel-Gauge Ver 0x3 | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| s3c-sdhci eb100000.sdhci: clock source 0: mmc_busclk.0 (133400000 Hz) | |
| s3c-sdhci eb100000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) | |
| s3c-sdhci eb100000.sdhci: allocated mmc-pwrseq | |
| mmc0: SDHCI controller on samsung-hsmmc [eb100000.sdhci] using ADMA | |
| s3c-sdhci eb200000.sdhci: clock source 0: mmc_busclk.0 (133400000 Hz) | |
| s3c-sdhci eb200000.sdhci: clock source 2: mmc_busclk.2 (40000000 Hz) | |
| s3c-sdhci eb200000.sdhci: Got CD GPIO | |
| mmc1: SDHCI controller on samsung-hsmmc [eb200000.sdhci] using ADMA | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| bma180 5-0038: mounting matrix not found: using identity... | |
| mmc0: queuing unknown CIS tuple 0x80 (50 bytes) | |
| NET: Registered protocol family 10 | |
| Segment Routing with IPv6 | |
| sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| Loading compiled-in X.509 certificates | |
| mmc0: queuing unknown CIS tuple 0x80 (7 bytes) | |
| exynos4-fb f8000000.fimd: failed to get system register. | |
| [drm] Exynos DRM: using f8000000.fimd device for DMA mapping operations | |
| exynos-drm exynos-drm: bound f8000000.fimd (ops 0xc0732c58) | |
| exynos-rotator fa300000.rotator: The exynos rotator has been probed successfully | |
| exynos-drm exynos-drm: bound fa300000.rotator (ops 0xc0733570) | |
| [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [drm] No driver support for vblank timestamp query. | |
| mmc0: queuing unknown CIS tuple 0x80 (3 bytes) | |
| mmc0: new SDIO card at address 0001 | |
| mmc1: new high speed SDHC card at address 0001 | |
| mmcblk1: mmc1:0001 SD8GB 7.32 GiB | |
| mmcblk1: p1 p2 | |
| Console: switching to colour frame buffer device 60x50 | |
| exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device | |
| [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 | |
| ubi0: attaching mtd3 | |
| ubi0: scanning is finished | |
| ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 80 | |
| ubi0: attached mtd3 (name "ubi", size 957 MiB) | |
| ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | |
| ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | |
| ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | |
| ubi0: good PEBs: 3830, bad PEBs: 0, corrupted PEBs: 0 | |
| ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | |
| ubi0: max/mean erase counter: 1995/4, WL threshold: 4096, image sequence number: 2943374792 | |
| ubi0: available PEBs: 0, total reserved PEBs: 3830, PEBs reserved for bad PEB handling: 38 | |
| ubi0: background thread "ubi_bgt0d" started, PID 67 | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input1 | |
| hctosys: unable to open rtc device (rtc0) | |
| vibrator-en: disabling | |
| vga_isp_sys: disabling | |
| VUSB_1.1V: disabling | |
| VUSB_3.3V: disabling | |
| vddarm: disabling | |
| vddint: disabling | |
| SAFEOUT1: disabling | |
| EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 1024K | |
| Run /sbin/init as init process | |
| INIT: version 2.88 booting | |
| OpenRC 0.23 is starting up Linux 5.3.0-rc3-00044-ge892af22b3ef (armv7l) | |
| * Mounting /proc ... | |
| [ ok ] | |
| * Mounting /run ... | |
| * /run/openrc: creating directory | |
| * /run/lock: creating directory | |
| * /run/lock: correcting owner | |
| * Caching service dependencies ... | |
| Error: hwclock is the name of a real and virtual service. | |
| [ ok ] | |
| * Caching service dependencies ... | |
| Error: hwclock is the name of a real and virtual service. | |
| [ ok ] | |
| * Clock skew detected with `/etc/init.d/zram' | |
| * Adjusting mtime of `/run/openrc/deptree' to Wed Feb 27 19:14:27 2019 | |
| [....] Starting the hotplug events dispatcher: udevdudevd[588]: starting version 3.2.2 | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| random: udevd: uninitialized urandom read (16 bytes read) | |
| udevd[589]: starting eudev-3.2.2 | |
| . ok | |
| [....] Synthesizing the initial hotplug events...max8998-rtc max8998-rtc: registered as rtc0 | |
| max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc | |
| input: pwm-vibrator as /devices/platform/pwm-vibrator/input/input2 | |
| dwc2 ec000000.hsotg: Configuration mismatch. dr_mode forced to host | |
| [ ok atmel_mxt_ts 2-004a: Family: 128 Variant: 1 Firmware V1.6.AB Objects: 17 | |
| Bluetooth: Core ver 2.22 | |
| NET: Registered protocol family 31 | |
| Bluetooth: HCI device and connection manager initialized | |
| dwc2 ec000000.hsotg: dwc2_check_params: Invalid parameter besl=1 | |
| videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| done. | |
| Bluetooth: HCI socket layer initialized | |
| Bluetooth: L2CAP socket layer initialized | |
| Bluetooth: SCO socket layer initialized | |
| cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [....] Waiting for /dev to be fully populated...dwc2 ec000000.hsotg: DWC OTG Controller | |
| dwc2 ec000000.hsotg: new USB bus registered, assigned bus number 1 | |
| Bluetooth: HCI UART driver ver 2.3 | |
| Bluetooth: HCI UART protocol H4 registered | |
| videodev: version magic '5.3.0-rc3-00012-g57e2fe23bd48 preempt mod_unload ARMv7 p2v8 ' should be '5.3.0-rc3-00044-ge892af22b3ef preempt mod_unload ARMv7 p2v8 ' | |
| dwc2 ec000000.hsotg: irq 72, io mem 0xec000000 | |
| hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator | |
| Bluetooth: HCI UART protocol Broadcom registered | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator | |
| atmel_mxt_ts 2-004a: Direct firmware load for maxtouch.cfg failed with error -2 | |
| atmel_mxt_ts 2-004a: Touchscreen size X1023Y1023 | |
| input: Atmel maXTouch Touchscreen as /devices/platform/soc/e1a00000.i2c/i2c-2/2-004a/input/input3 | |
| cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| dwc2 ec000000.hsotg: Overcurrent change detected | |
| dwc2 ec000000.hsotg: Overcurrent change detected | |
| platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| cfg80211: failed to load regulatory.db | |
| brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4329-sdio for chip BCM4329/3 | |
| brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4329-sdio.samsung,fascinate4g.txt failed with error -2 | |
| wake enabled for irq 154 | |
| brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4329-sdio for chip BCM4329/3 | |
| brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available | |
| brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4329/3 wl0: Sep 2 2011 14:48:19 version 4.220.48 | |
| ieee80211 phy0: brcmf_setup_wiphybands: rxchain error (-52) | |
| done. | |
| ieee80211 phy0: _brcmf_set_multicast_list: Setting BRCMF_C_SET_PROMISC failed, -52 | |
| [ ok ] Setting up keyboard layout...done. | |
| Bluetooth: hci0: command 0x0c03 tx timeout | |
| [ ok ] Activating swap...done. | |
| EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
| [warn] Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning). | |
| [ ok ] Activating lvm and md swap...done. | |
| [....] Checking file systems...fsck from util-linux 2.29.2 | |
| fsck.ext2: No such file or directory while trying to open /dev/mmcblk0p1 | |
| Possibly non-existent device? | |
| fsck exited with status code 8 | |
| failed (code 8). | |
| [....] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manuall[FAIL. failed! | |
| [warn] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ... (warning). | |
| Give root password for maintenance | |
| (or press Control-D to continue): Bluetooth: hci0: BCM: Reset failed (-110) | |
| [ ok ] Cleaning up temporary files... /tmp. | |
| [....] Mounting local filesystems...mount: special device /dev/mmcblk0p1 does not exist | |
| failed. | |
| [ ok ] Activating swapfile swap...done. | |
| [ ok ] Cleaning up temporary files.... | |
| urandom_read: 1 callbacks suppressed | |
| random: dd: uninitialized urandom read (512 bytes read) | |
| [ ok ] Setting kernel variables...done. | |
| [....] Configuring network interfaces...ifup: interface wlan0 already configured | |
| done. | |
| [ ok ] Cleaning up temporary files.... | |
| [ ok ] Setting up ALSA...done (none loaded). | |
| * Setting LCD backlight to 200 ... | |
| /lib/rc/sh/openrc-run.sh: 11: /lib/rc/sh/openrc-run.sh: cannot create /sys/class/backlight/lcd/brightness: Directory nonexistent | |
| * ERROR: droid4-lcd failed to start | |
| [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. | |
| random: perl: uninitialized urandom read (4 bytes read) | |
| modinfo: ERROR: Module zram not found. | |
| modprobe: FATAL: Module zram not found in directory /lib/modules/5.3.0-rc3-00044-ge892af22b3ef | |
| /etc/init.d/zram: 27: /etc/init.d/zram: cannot create /sys/block/zram0/disksize: Directory nonexistentrandom: mkswap: uninitialized urandom read (16 bytes read) | |
| mkswap: cannot open /dev/zram0: No such file or directory | |
| swapon: cannot open /dev/zram0: No such file or directory | |
| * ERROR: zram failed to start | |
| Removing /tmp/first-boot-flag-tmp. | |
| INIT: Entering runlevel: 2 | |
| * WARNING: clock skew detected! | |
| [ ok ] Starting enhanced syslogd: rsyslogd. | |
| [....] Starting system message bus: dbusrandom: dbus-daemon: uninitialized urandom read (12 bytes read) | |
| random: dbus-daemon: uninitialized urandom read (12 bytes read) | |
| . ok | |
| * About to exec dsme in state 'USER'. ... | |
| DSME 0.61.1 starting up | |
| CAL ERROR: invalid header magic at addr 0x00000000: 52444e41 | |
| CAL ERROR: invalid header magic at addr 0x00000000: d11839c2 | |
| CAL ERROR: both configuration areas are invalid; choosing first half | |
| dsme wdd: Error reading R&D mode flags, WD kicking enabled | |
| dsme wdd: Error opening WD /dev/watchdog0: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog1: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog2: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog3: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog4: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog5: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog6: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog7: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog8: No such file or directory | |
| dsme wdd: Error opening WD /dev/watchdog9: No such file or directory | |
| dsme wdd: no WD's opened; WD kicking disabled | |
| dsme wdd: Entering main loop, with 12 s interval | |
| waitfordsme: Wait for DSME socket... | |
| DSME 0.61.1 starting up | |
| BOOTSTATE: 'USER' | |
| state change request: DSME_STATE_NOT_SET -> DSME_STATE_USER | |
| Startup state: DSME_STATE_USER | |
| /usr/lib/dsme/libthermalobject_surface.so: cannot open shared object file: No such file or directory | |
| waitfordsme: OK: DSME socket exists | |
| * Starting dbus user session ... | |
| AF Warning: '/etc/osso-af-init/sdl.defs' not found | |
| Starting Periodical temporary file purging daemon | |
| Starting D-BUS session bus daemon | |
| random: dbus-daemon: uninitialized urandom read (12 bytes read) | |
| * Starting ke-recv presetup ... | |
| * Starting ke-recv ... | |
| modprobe: FATAL: Module configfs not found in directory /lib/modules/5.3.0-rc3-00044-ge892af22b3ef | |
| modprobe: FATAL: Module usb_f_mass_storage not found in directory /lib/modules/5.3.0-rc3-00044-ge892af22b3ef | |
| usbg_init() No such file or directory: couldn't init gadget state | |
| In: usbg_init("/sys/kernel/config", &state) (Function: gadget_init) | |
| Error: USBG_ERROR_NOT_FOUND : Not found (file or directory removed) | |
| In: usbg_create_gadget(state, "g1", &g_attrs, &g_strs, &g) (Function: network_gadget) | |
| Error: USBG_ERROR_INVALID_PARAM : Invalid parameter | |
| Probing for drivers for Nokia N900 | |
| Cannot find supply for Nokia N900 | |
| Probing for drivers for LIME2 | |
| Found supply | |
| Cannot find otg for LIME2 | |
| Probing for drivers for Motorola Droid 4 | |
| Found supply | |
| Cannot find otg for Motorola Droid 4 | |
| find_devices failed | |
| * Starting Xorg Server | |
| (process:2010): GUdev-CRITICAL **: g_udev_device_get_sysfs_path: assertion 'G_UDEV_IS_DEVICE (device)' failed | |
| (process:2010): GLib-CRITICAL **: g_file_get_contents: assertion 'filename != NULL' failed | |
| (process:2010): GUdev-CRITICAL **: g_udev_device_get_sysfs_path: assertion 'G_UDEV_IS_DEVICE (device)' failed | |
| (process:2010): GLib-CRITICAL **: g_file_get_contents: assertion 'filename != NULL' failed | |
| X.Org X Server 1.19.2 | |
| Release Date: 2017-03-02 | |
| X Protocol Version 11, Revision 0 | |
| Build Operating System: Linux 4.9.45lostmemory armv7l Devuan | |
| Current Operating System: Linux devuan-droid4 5.3.0-rc3-00044-ge892af22b3ef #180 PREEMPT Mon Aug 26 15:22:08 PDT 2019 armv7l | |
| Kernel command line: ubi.mtd=ubi mtdparts=b0600000.onenand:256k@25856k(uboot-env),10240k(boot),10240k(recovery),980480k(ubi) console=ttySAC2,115200 ro rootwait rootfstype=ext4 root=/dev/mmcblk1p2 | |
| Build Date: 17 November 2018 12:47:09PM | |
| xorg-server 2:1.19.2-2+1m7.1 (https://www.debian.org/support) | |
| Current version of pixman: 0.34.0 | |
| Before reporting problems, check http://wiki.x.org | |
| to make sure that you have the latest version. | |
| Markers: (--) probed, (**) from config file, (==) default setting, | |
| (++) from command line, (!!) notice, (II) informational, | |
| (WW) warning, (EE) error, (NI) not implemented, (??) unknown. | |
| (++) Log file: "/tmp/Xorg.0.log", Time: Tue Aug 27 01:11:38 2019 | |
| (==) Using config directory: "/etc/X11/xorg.conf.d" | |
| (==) Using system config directory "/usr/share/X11/xorg.conf.d" | |
| MESA-LOADER: failed to retrieve device information | |
| gbm: failed to open any driver (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri) | |
| gbm: Last dlopen error: /usr/lib/dri/exynos_dri.so: cannot open shared object file: No such file or directory | |
| failed to load driver: exynos | |
| EGL_MESA_drm_image required. | |
| AF Warning: '/etc/osso-af-init/sdl.defs' not found | |
| Starting Sapwood image server | |
| AF Warning: '/etc/osso-af-init/matchbox.sh' not found | |
| Error org.freedesktop.DBus.Error.ServiceUnknown: The name com.nokia.mce was not provided by any .service files | |
| AF Warning: '/etc/osso-af-init/sdl.defs' not found | |
| /etc/init.d/clockd: 55: [: /etc/osso-af-init/keyboard.defs: unexpected operator | |
| Starting Clock Daemon: clockd. | |
| [ ok ] Setting up console font and keymap...done. | |
| [ ok ] Starting periodic command scheduler: cron. | |
| random: crng init done | |
| * No thermal bits; using normal limits | |
| * Starting mce ... | |
| CAL ERROR: invalid header magic at addr 0x00000000: 52444e41 | |
| CAL ERROR: invalid header magic at addr 0x00000000: d11839c2 | |
| CAL ERROR: both configuration areas are invalid; choosing first half | |
| CAL ERROR: invalid header magic at addr 0x00000000: 52444e41 | |
| CAL ERROR: invalid header magic at addr 0x00000000: d11839c2 | |
| CAL ERROR: both configuration areas are invalid; choosing first half | |
| onenand_write_ops_nolock: Attempt to write not page aligned data | |
| CAL ERROR: nand_write: write (2048 bytes at around 00680000): Invalid argument | |
| CAL ERROR: invalid header magic at addr 0x00000000: 52444e41 | |
| CAL ERROR: invalid header magic at addr 0x00000000: d11839c2 | |
| CAL ERROR: both configuration areas are invalid; choosing first half | |
| CAL ERROR: invalid header magic at addr 0x00000000: 52444e41 | |
| CAL ERROR: invalid header magic at addr 0x00000000: d11839c2 | |
| CAL ERROR: both configuration areas are invalid; choosing first half | |
| onenand_write_ops_nolock: Attempt to write not page aligned data | |
| CAL ERROR: nand_write: write (2048 bytes at around 00680000): Invalid argument | |
| AF Warning: '/etc/osso-af-init/sdl.defs' not found | |
| defender (2317): /proc/2316/oom_adj is deprecated, please use /proc/2316/oom_score_adj instead. | |
| (sapwood-server:2318): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2318 exited with signal 5 and restarted with pid 2326 | |
| (sapwood-server:2326): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2326 exited with signal 5 and restarted with pid 2336 | |
| (sapwood-server:2336): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2336 exited with signal 5 and restarted with pid 2353 | |
| (sapwood-server:2353): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2353 exited with signal 5 and restarted with pid 2356 | |
| (sapwood-server:2356): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2356 exited with signal 5 and restarted with pid 2359 | |
| ** (hildon-home:2352): WARNING **: /usr/lib/hildon-desktop/connui-cellular-operator-home-item.so: cannot open shared object file: No such file or directory | |
| ** (hildon-home:2352): WARNING **: Could not load operator module /usr/lib/hildon-desktop/connui-cellular-operator-home-item.so. | |
| (sapwood-server:2359): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2359 exited with signal 5 and restarted with pid 2362 | |
| Process '/usr/bin/hildon-status-menu' with pid 2344 exited with signal 11 and restarted with pid 2364 | |
| (sapwood-server:2362): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2362 exited with signal 5 and restarted with pid 2366 | |
| cp: cannot stat '/usr/share/bookmark-manager/bookmarks/MyBookmarks.xml': No such file or directory | |
| ** (hildon-home:2352): WARNING **: cp /usr/share/bookmark-manager/bookmarks/MyBookmarks.xml /home/user/.bookmarks failed with status 1 | |
| (sapwood-server:2366): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2366 exited with signal 5 and restarted with pid 2370 | |
| (hildon-home:2352): GLib-GIO-CRITICAL **: g_file_get_uri: assertion 'G_IS_FILE (file)' failed | |
| (hildon-home:2352): GLib-CRITICAL **: g_path_get_basename: assertion 'file_name != NULL' failed | |
| Process '/usr/bin/hildon-home' with pid 2347 exited with signal 11 and restarted with pid 2372 | |
| (sapwood-server:2370): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2370 exited with signal 5 and restarted with pid 2374 | |
| (sapwood-server:2374): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Process '/usr/lib/sapwood/sapwood-server' with pid 2374 exited with signal 5 and restarted with pid 2377 | |
| ** (hildon-home:2373): WARNING **: The program did not exit properly on the previous session. All plugins will be disabled. | |
| ** (hildon-home:2373): WARNING **: /usr/lib/hildon-desktop/connui-cellular-operator-home-item.so: cannot open shared object file: No such file or directory | |
| ** (hildon-home:2373): WARNING **: Could not load operator module /usr/lib/hildon-desktop/connui-cellular-operator-home-item.so. | |
| (sapwood-server:2377): sapwood-server-ERROR **: bind(/var/tmp/sapwood-:0.0): Address already in use | |
| Non-root process '/usr/lib/sapwood/sapwood-server' with pid 2377 exited with signal 5; spawning too fast, remove it | |
| cp: cannot stat '/usr/share/bookmark-manager/bookmarks/MyBookmarks.xml': No such file or directory | |
| ** (hildon-home:2373): WARNING **: cp /usr/share/bookmark-manager/bookmarks/MyBookmarks.xml /home/user/.bookmarks failed with status 1 | |
| ** (hildon-home:2373): WARNING **: background_info_loaded. Could not initialize background info. Error opening file /home/user/.backgrounds/cache.info: No such file or directory | |
| ** (hildon-home:2373): WARNING **: get_background_for_view. Could not get any background for view 4 | |
| ** (hildon-home:2373): WARNING **: get_background_for_view. Could not get any background for view 5 | |
| ** (hildon-home:2373): WARNING **: get_background_for_view. Could not get any background for view 6 | |
| ** (hildon-home:2373): WARNING **: get_background_for_view. Could not get any background for view 7 | |
| ** (hildon-home:2373): WARNING **: get_background_for_view. Could not get any background for view 8 | |
| ** (hildon-home:2373): WARNING **: hd_plugin_configuration_configuration_loaded. Couldn't read plugin_paths in dir /usr/share/applications/hildon-home. Error: Error opening directory '/usr/share/applications/hildon-home': No such file or directory | |
| I/O warning : failed to load external entity "/home/user/.bookmarks/MyBookmarks.xml" | |
| I/O warning : failed to load external entity "/home/user/.bookmarks/MyBookmarks.xml" | |
| ** (hildon-home:2373): WARNING **: Could not read users bookmarks from file | |
| ** (hildon-home:2373): WARNING **: load_plugin_idle. Plugin desktop file /usr/share/applications/hildon-notification/hildon-plugins-notify-sv.desktop not found. Ignoring plugin | |
| ** (hildon-desktop:2354): WARNING **: Error loading cached background image /home/user/.backgrounds/background-5.pvr. Failed to open file '/home/user/.backgrounds/background-5.pvr': No such file or directory | |
| ** (hildon-desktop:2354): WARNING **: Error loading cached background image /home/user/.backgrounds/background-6.pvr. Failed to open file '/home/user/.backgrounds/background-6.pvr': No such file or directory | |
| ** (hildon-desktop:2354): WARNING **: Error loading cached background image /home/user/.backgrounds/background-7.pvr. Failed to open file '/home/user/.backgrounds/background-7.pvr': No such file or directory | |
| ** (hildon-desktop:2354): WARNING **: Error loading cached background image /home/user/.backgrounds/background-8.pvr. Failed to open file '/home/user/.backgrounds/background-8.pvr': No such file or directory | |
| ** (hildon-desktop:2354): WARNING **: Error loading cached background image /home/user/.backgrounds/background-9.pvr. Failed to open file '/home/user/.backgrounds/background-9.pvr': No such file or directory | |
| ** Message: ui up and running | |
| * Waiting for hildon-desktop to start ... | |
| [ ok ] | |
| * Starting hulda (Kernel UEvents to D-Bus system daemon proxy) ... | |
| * Starting Internet Connectivity daemon 2 ... | |
| ICD2 WLAN network plugin 0.1.5+1m7.3 initializing | |
| AF Warning: '/etc/osso-af-init/sdl.defs' not found | |
| Starting Maemo Launcher: maemo-launcher start failed. | |
| wlan_set_state: 0 -> 0 | |
| wlan_state_change_cb: current state: disconnected | |
| wlan_set_state: 0 -> 0 | |
| [ ok ] Starting NTP server: ntpd. | |
| [....] Starting OpenBSD Secure Shell server: sshdCould not load host key: /etc/ssh/ssh_host_rsa_key | |
| Could not load host key: /etc/ssh/ssh_host_ecdsa_key | |
| Could not load host key: /etc/ssh/ssh_host_ed25519_key | |
| . ok | |
| ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 | |
| * \nWelcome to your upstart powered internet tablet.\n | |
| INIT: Id "s0" respawning too fast: disabled for 5 minutes | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment