yamori813

def copylcd(c, sp)
  for n in 1..64 do
    rgba = c.getpix(0, n - 1, 128)
    for i in 1..16 do
      pat = 0
      for k in 1..8 do
        if rgba[1 + (i - 1) * 4 * 8 + (k - 1) * 4] == 0xff
          pat |= 1 << (8 - k)
        end
      end

yamori813

def copylcd(c, sp)
  for n in 1..64 do
    rgba = c.getpix(0, n - 1, 128)
    for i in 1..16 do
      pat = 0
      for k in 1..8 do
        if rgba[1 + (i - 1) * 4 * 8 + (k - 1) * 4] == 0xff
          pat |= 1 << (8 - k)
        end
      end

yamori813

# geom -t
Geom                         Class      Provider
flash/spi0                   DISK       flash/spi0
  flash/spi0                 MAP        map/bootloader
    map/bootloader           DEV       
  flash/spi0                 MAP        map/upgrade
    map/upgrade              DEV       
  flash/spi0                 MAP        map/kernel
    map/kernel               DEV       
  flash/spi0                 MAP        map/rootfs

yamori813

BCM338332 TP0 346890
MemSize:            128 M
Chip ID:     BCM3383G-B0

BootLoader Version: 2.6.0-15-gac1e Release Gnu spiboot reduced DDR drive
Build Date: Mar 13 2015
Build Time: 15:41:05
SPI flash ID 0xc22018, size 16MB, block size 64KB, write buffer 256, flags 0x0
parameter offset is 40788

yamori813

===> lib/clang/libclang (all)
===> lib/clang/headers (all)
===> lib/clang/libllvm (install)
===> lib/clang/libclang (install)
===> lib/clang/headers (install)
sh /usr/home/hiroki/freebsd/tools/install.sh  -C -o root -g wheel -m 444  /usr/h
ome/hiroki/freebsd/contrib/llvm/tools/clang/lib/Headers/__clang_cuda_builtin_var
s.h /usr/home/hiroki/freebsd/contrib/llvm/tools/clang/lib/Headers/__clang_cuda_c
math.h /usr/home/hiroki/freebsd/contrib/llvm/tools/clang/lib/Headers/__clang_cud
a_complex_builtins.h /usr/home/hiroki/freebsd/contrib/llvm/tools/clang/lib/Heade

yamori813

Bootbase Version: V1.11 | 11/05/2002 17:43:55
RAM: Size = 8192 Kbytes
DRAM POST: Testing:  8192K
OK
FLASH: AMD 16M *1

RAS Version: V3.60(CZ.0) | 11/12/2002 13:30:40

Press any key to enter debug mode within 3 seconds.
...

yamori813

3329_map_part.h:#define UART_BASE            0xb0000100  /* uart registers */
3380_map_part.h:#define UART_BASE0  0xb4e00200   // uart registers
3383_map_part.h:#define UART_BASE0   0xb4e00500   // uart registers
3384_map_part.h:#define UART_BASE0   0xb4e00500   // uart registers

60333_map_part.h:#define UART_BASE                   0xb3e00500  /* UART registers */
6318_map_part.h:#define UART_BASE                   0xb0000100  /* uart registers */
63268_map_part.h:#define UART_BASE                   0xb0000180  /* uart registers */
6328_map_part.h:#define UART_BASE            0xb0000100  /* uart registers */
63381_map_part.h:#define UART_BASE                   0xb0000280  /* uart registers */

yamori813

    1e7c:       3c0fb000        lui     t7,0xb000
    1e80:       35ef0180        ori     t7,t7,0x180
    1e84:       24180020        li      t8,32
    1e88:       85f90012        lh      t9,18(t7)
    1e8c:       0338c824        and     t9,t9,t8
    1e90:       1738fffd        bne     t9,t8,0x1e88
    1e94:       00000000        nop
    1e98:       0004c602        srl     t8,a0,0x18
    1e9c:       a1f80017        sb      t8,23(t7)
    1ea0:       0004c402        srl     t8,a0,0x10

yamori813

# sysctl -a | grep ipsec
kern.features.ipsec: 1
kern.features.ipsec_natt: 1
net.inet.ipsec.def_policy: 1
net.inet.ipsec.esp_trans_deflev: 1
net.inet.ipsec.esp_net_deflev: 1
net.inet.ipsec.ah_trans_deflev: 1
net.inet.ipsec.ah_net_deflev: 1
net.inet.ipsec.ah_cleartos: 1
net.inet.ipsec.dfbit: 0

yamori813

soc
    mips,arm,ppc…
    mips - over 4k(atheros,mediatek,broadcom)
    arm  - v4, v6, v7
router
    JP, EURO, USA    
bootloader
    u-boot,redboot,cfe...
    ubldr
execute