Skip to content

Instantly share code, notes, and snippets.

@ydkn
Created June 13, 2012 14:42
Show Gist options
  • Save ydkn/2924486 to your computer and use it in GitHub Desktop.
Save ydkn/2924486 to your computer and use it in GitHub Desktop.
adb dmesg output on beagleboard-xm with ics
<5>Linux version 2.6.37-g43df1dd (android@android-dev) (gcc version 4.4.3 (GCC) ) #10 Wed Jun 13 15:28:28 CEST 2012
<4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>Machine: OMAP3 Beagle Board
<6>Reserving 8388608 bytes SDRAM for VRAM
<4>Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
<7>On node 0 totalpages: 63488
<7>free_area_init_node: node 0, pgdat c05bd35c, node_mem_map c0685000
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 62976 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
<5>Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait noinitrd init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y omapfb.mode=dvi:640x480MR-16 omapdss.def_disp="dvi" vram=8M omapfb.vram=0:8M
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 248MB = 248MB total
<5>Memory: 244988k/244988k available, 17156k reserved, 0K highmem
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5> vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
<5> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5> .init : 0xc0008000 - 0xc003c000 ( 208 kB)
<5> .text : 0xc003c000 - 0xc057c000 (5376 kB)
<5> .data : 0xc057c000 - 0xc05c2800 ( 282 kB)
<6>NR_IRQS:409
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
<6>Reprogramming SDRC clock to 400000000 Hz
<3>dpll3_m2_clk rate change failed: -22
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>GPMC revision 5.0
<4>Trying to install interrupt handler for IRQ402
<4>Trying to install interrupt handler for IRQ403
<4>Trying to install interrupt handler for IRQ404
<4>Trying to install interrupt handler for IRQ405
<4>Trying to install interrupt handler for IRQ406
<4>Trying to install interrupt handler for IRQ407
<4>Trying to install interrupt handler for IRQ408
<3>Trying to install type control for IRQ409
<3>Trying to set irq flags for IRQ409
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<4>Console: colour dummy device 80x30
<6>Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>regulator: core version 0.5
<6>regulator: dummy:
<6>NET: Registered protocol family 16
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>omap_mux_init: Add partition: #1: core, flags: 0
<6>OMAP3 Beagle Rev: xM C
<6>Found NAND on CS0
<6>Registering NAND on CS0
<3>Unable to get DVI reset GPIO
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>OMAP DMA hardware revision 5.0
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4>omap_device: omap_i2c.1: new worst case activate latency 0: 30517
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<6>regulator: VUSB1V5: 1500 mV normal standby
<6>regulator: VUSB1V8: 1800 mV normal standby
<6>regulator: VUSB3V1: 3100 mV normal standby
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
<6>regulator: VDAC: 1800 mV normal standby
<6>regulator: VDVI: 1800 mV normal standby
<6>regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
<6>regulator: VAUX3: 1800 mV normal standby
<6>regulator: VAUX4: 1800 mV normal standby
<4>omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
<6>Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>Switching to clocksource 32k_counter
<6>musb-hdrc: version 6.0, otg (peripheral+host), debug=0
<6>musb-hdrc musb-hdrc.0: dma type: dma-inventra
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 1.800
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>omap-iommu omap-iommu.0: isp registered
<6>AM37x/DM37x Linux PSP version 04.02.00.07 (OMAP3BEAGLE)
<6>ashmem: initialized
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<6>msgmni has been set to 478
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>OMAP DSS rev 2.0
<6>OMAP DISPC rev 3.0
<6>OMAP VENC rev 2
<6>OMAP DSI rev 1.0
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
<6>console [ttyO2] enabled
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
<6>brd: module loaded
<6>loop: module loaded
<3>mtdoops: mtd device (mtddev=name/number) must be supplied
<6>omap2-nand driver initializing
<4>No NAND device found.
<4>No NAND device found.
<6>OneNAND driver initializing
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver smsc95xx
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<4>ehci-omap.0 supply hsusb0 not found, using dummy regulator
<4>ehci-omap.0 supply hsusb1 not found, using dummy regulator
<6>ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
<6>ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
<6>ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
<6>ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OMAP-EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.37-g43df1dd ehci_hcd
<6>usb usb1: SerialNumber: ehci-omap.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 3 ports detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>android init
<6>android_probe pdata: c058bf2c
<6>android_bind
<7>android_bind_config
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc.0: MUSB HDRC host driver
<6>musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: MUSB HDRC host driver
<6>usb usb2: Manufacturer: Linux 2.6.37-g43df1dd musb-hcd
<6>usb usb2: SerialNumber: musb-hdrc.0
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>f_adb init
<6>android_register_function adb
<6>adb_bind_config
<6>f_mass_storage init
<6>android_register_function usb_mass_storage
<6>mice: PS/2 mouse device common for all mice
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
<6>using rtc device, twl_rtc, for alarms
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<4>twl_rtc twl_rtc: Power up reset detected.
<6>twl_rtc twl_rtc: Enabling TWL-RTC.
<6>i2c /dev entries driver
<6>Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<4>omap3isp supply VDD_CSIPHY1 not found, using dummy regulator
<4>omap3isp supply VDD_CSIPHY2 not found, using dummy regulator
<6>omap3isp omap3isp: Revision 15.0 found
<6>omap-iommu omap-iommu.0: isp: version 1.1
<7>omap3isp omap3isp: hist: DMA channel = 0
<7>omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 24685714 Hz
<7>mt9v113 2-003c: mt9v113_read_reg reg=0x0, val=0x0
<7>mt9v113 2-003c: chip id detected 0x0
<3>mt9v113 2-003c: chip id mismatch read 0x0, expecting 0x2280
<7>omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 0 Hz
<3>isp_register_subdev_group: Unable to register subdev mt9v113
<6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<3>twl4030_wdt twl4030_wdt: Failed to register misc device
<4>twl4030_wdt: probe of twl4030_wdt failed with error -16
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>usbcore: registered new interface driver snd-usb-audio
<6>OMAP3 Beagle/Devkit8000 SoC init
<6>usb 1-2: new high speed USB device using ehci-omap and address 2
<6>asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
<6>ALSA device list:
<6> #0: omap3beagle
<6>oprofile: hardware counters not available
<6>oprofile: using timer interrupt.
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Registering the dns_resolver key type
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>ThumbEE CPU extension supported.
<3>Power Management for TI OMAP3.
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>SmartReflex Class3 initialized
<6>clock: disabling unused clocks to save power
<4>platform mpu.0: omap_voltage_scale: Already at the requestedrate 600000000
<6>fbcvt: 640x480@60: CVT Name - .307M3-R
<6>usb 1-2: New USB device found, idVendor=0424, idProduct=9514
<6>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>hub 1-2:1.0: USB hub found
<6>hub 1-2:1.0: 5 ports detected
<4>regulator_init_complete: incomplete constraints, leaving VDAC on
<6>twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 15
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 16
<6>Waiting for root device /dev/mmcblk0p3...
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new high speed SDHC card at address aaaa
<6>mmcblk0: mmc0:aaaa SU04G 3.69 GiB
<6> mmcblk0: p1 p2 p3
<6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
<4>VFS: Mounted root (ext4 filesystem) on device 179:3.
<6>Freeing init memory: 208K
<6>usb 1-2.1: new high speed USB device using ehci-omap and address 3
<6>usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
<6>usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>smsc95xx v1.0.4
<3>init: cannot open '/initlogo.rle'
<6>smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 4a:70:6f:1f:15:be
<6>EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>android_usb gadget: high speed config #1: android
<6>enabling adb
<6>adb_open
<6>adb_release
<6>adb_open
<6>android_usb gadget: high speed config #1: android
<6>request_suspend_state: wakeup (3->0) at 37967407230 (2000-01-01 00:00:34.379608156 UTC)
<3>init: untracked pid 964 exited
<3>init: untracked pid 971 exited
<6>request_suspend_state: wakeup (0->0) at 39853149418 (2000-01-01 00:00:36.265380861 UTC)
<3>init: untracked pid 1055 exited
<3>init: untracked pid 1056 exited
<6>request_suspend_state: wakeup (0->0) at 45487701420 (2000-01-01 00:00:41.899932863 UTC)
<3>init: untracked pid 1071 exited
<3>init: untracked pid 1072 exited
<6>request_suspend_state: wakeup (0->0) at 50024993900 (2000-01-01 00:00:46.437194826 UTC)
<3>init: untracked pid 1087 exited
<3>init: untracked pid 1088 exited
<6>request_suspend_state: wakeup (0->0) at 54615356449 (2000-01-01 00:00:51.027557375 UTC)
<3>init: untracked pid 1103 exited
<3>init: untracked pid 1104 exited
<6>request_suspend_state: wakeup (0->0) at 60182800297 (2000-01-01 00:00:56.595031740 UTC)
<3>init: untracked pid 1119 exited
<3>init: untracked pid 1120 exited
<6>request_suspend_state: wakeup (0->0) at 64776275639 (2000-01-01 00:01:01.188507082 UTC)
<3>init: untracked pid 1135 exited
<3>init: untracked pid 1136 exited
<6>request_suspend_state: wakeup (0->0) at 70345489506 (2000-01-01 00:01:06.757720949 UTC)
<3>init: untracked pid 1151 exited
<3>init: untracked pid 1152 exited
<6>request_suspend_state: wakeup (0->0) at 74931701664 (2000-01-01 00:01:11.343902590 UTC)
<3>init: untracked pid 1170 exited
<3>init: untracked pid 1171 exited
<6>request_suspend_state: wakeup (0->0) at 80525299076 (2000-01-01 00:01:16.937500002 UTC)
<3>init: untracked pid 1186 exited
<3>init: untracked pid 1187 exited
<6>request_suspend_state: wakeup (0->0) at 85127960209 (2000-01-01 00:01:21.540191652 UTC)
<3>init: untracked pid 1202 exited
<3>init: untracked pid 1203 exited
<6>request_suspend_state: wakeup (0->0) at 89674407963 (2000-01-01 00:01:26.086608889 UTC)
<3>init: untracked pid 1218 exited
<3>init: untracked pid 1219 exited
<6>request_suspend_state: wakeup (0->0) at 95260864262 (2000-01-01 00:01:31.673095705 UTC)
<3>init: untracked pid 1234 exited
<3>init: untracked pid 1235 exited
<6>request_suspend_state: wakeup (0->0) at 99825988773 (2000-01-01 00:01:36.238220216 UTC)
<3>init: untracked pid 1250 exited
<3>init: untracked pid 1251 exited
<6>request_suspend_state: wakeup (0->0) at 105398223881 (2000-01-01 00:01:41.810424806 UTC)
<3>init: untracked pid 1266 exited
<3>init: untracked pid 1267 exited
<6>request_suspend_state: wakeup (0->0) at 109966400150 (2000-01-01 00:01:46.378631593 UTC)
<3>init: untracked pid 1282 exited
<3>init: untracked pid 1283 exited
<6>request_suspend_state: wakeup (0->0) at 115561523441 (2000-01-01 00:01:51.973724366 UTC)
<3>init: untracked pid 1298 exited
<3>init: untracked pid 1299 exited
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment