luisdelarosa

;K Line Test created by Sebastianv650
; from https://mattshub.com/2017/10/02/linear-advance/
; updated for PETG temperatures by luisdelarosa (@louielouie)
; hotend 240C
; bed 85C

M107
M83  ; extruder relative mode
M104 S240 ; set extruder temp
M140 S85 ; set bed temp

tkersey

found at: http://fascinated.fm/post/2379188731/getting-a-motorola-sbg6580-into-bridge-mode-on

Getting a Motorola SBG6580 into “Bridge” mode on TimeWarner Wideband

1. Unplug coax cable from Motorola
2. Hold down the white reset button on the back panel with a pen for 30s.  This resets all settings to factory defaults. The modem will be auto-reconfigured once you plug in the coax cable.
3. When modem is back on plug in a computer with an Ethernet cable into the modem.
4. Connect to http://192.168.0.1 and login with “admin” / “motorola”
5. Now you will make some changes:
 

• Wireless -> Primary Network -> Disabled