Name | Description |
---|---|
Syncthings | Syncthing is a continuous file synchronization program. It synchronizes files between two or more computers in real time, safely protected from prying eyes. Your data is your data alone and you deserve to choose where it is stored, whether it is shared with some third party, and how it’s transmitted over the internet. |
The guide would setup syncthings with a PC and RG35XX Plus running muOS, if your host system is different the concept would be the same however you might need to tweak a few things. I would be syncing my muOS save
folder to my PC as a backup method.
- Install/Setup Syncthings on your PC
- Enable/Setup Syncthings in muOS
Download from the here
After installation head to 127.0.0.1:8384, you should see something like the following
Click "Add Folder" and let's go through some important tabs
You would need to create a folder label, and set the folder path, note that the path here is what folder do you want to sync on your PC.
Let's go to the File Versioning Tag
Here you can setup how back up files are being versioned, I prefer a Simple File Versioning, you can see the details by clicking the Help link
Here I'm changing the Folder Type to be "Receive Only" because I would only be receiving save files from my muOS, if you want to actually sync between your PC and muOS you can keep it as Send and Receive
At this point we installed Syncthings in PC and we also setup a folder that would store our backed up save files on PC. Now we need to setup Syncthings in muOS.
First make sure your muOS is connected to WiFi and note down your IP, your IP should look similar to 192.168.1.217, from now on I would use 192.168.1.217 as the muOS IP.
In muOS main MENU -> Configuration -> WebServices -> Syncthings (toggle this to Enabled)
Once Syncthings is enabled in muOS, refresh 127.0.0.1:8384, you should be seeing your PC recognizing a new device on network, add it in by clicking "Add Device", pick a name of your device and click "Save"
At this point you added muOS in PC, but on PC's "Remove Devices" section you would see "muos" showing as "Disconnected(Unused). Now you need to add PC in muOS
Go to your muOS IP with port 7070, in my case it's 192.168.1.217:7070, you should see the familiar Syncthings web UI, here you should be able to see it recogonizing your PC
Click "Add Device"
Pick a name of the device and click "Save"
Now you need to setup which folder in muOS to sync with your PC, under Folders section click "Add Folder", here it's pretty much the same as how you added a folder in PC, the Folder Label could be anything but the Folder ID needs to be same as the Folder ID you had in PC (wmtcf-gbjgs in this case), and you would need to set the folder path to /mnt/mmc/MUOS/save
if you only want to backup the saves. It would be nice to setup File Versioning and change Advances to Send only to make sure the sync is going one way from muOS to PC in this setup
In "Sharing" tab also make sure to check your PC
Go back to https://127.0.0.1:8384/ and click on the folder you created, click on "Edit", go to Sharing tab and click muos
(which is the device you are connected to)
At this point your muOS would send your save files to your PC :)