Skip to content

Instantly share code, notes, and snippets.

@yuvadm

yuvadm/00-info.md

Last active July 20, 2017 18:31
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save yuvadm/238db856f1a81a572b0cd2a02a51ae8a to your computer and use it in GitHub Desktop.
Save yuvadm/238db856f1a81a572b0cd2a02a51ae8a to your computer and use it in GitHub Desktop.
Download ZIP
Raw
00-info.md
Raw
02-fastboot.log
Format: Log Type - Time(microsec) - Message
Log type: B - since boot(excluding boot rom). D - delta
B - 107543 - SBL1, Start
B - 112697 - scatterload_region && ram_init, Start
D - 0 - scatterload_region && ram_init, Delta
B - 128191 - pm_device_init, Start
D - 4117 - pm_device_init, Delta
B - 132644 - boot_flash_init, Start
D - 13145 - boot_flash_init, Delta
B - 146064 - boot_config_data_table_init, Start
D - 61 - boot_config_data_table_init, Delta
B - 152195 - sbl1_ddr_set_params, Start
B - 156007 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 170678 - pm_driver_init, Start
D - 22966 - pm_driver_init, Delta
B - 193705 - clock_init, Start
D - 213 - clock_init, Delta
B - 209809 - Image Load, Start
B - 209840 - check fota partition, Start
B - 210907 - check fota partition, Over
B - 223687 - Tz Execution, Start
D - 280569 - Tz Execution, Delta
B - 505934 - Image Load, Start
B - 505964 - check fota partition, Start
B - 508099 - check fota partition, Over
B - 518561 - Signal PBL to Jump to RPM FW
B - 518988 - Image Load, Start
B - 520086 - WDT Execution, Start
D - 1769 - WDT Execution, Delta
B - 525820 - Image Load, Start
B - 528900 - check fota partition, Start
B - 532835 - check fota partition, Over
B - 544455 - sbl1_efs_handle_cookies, Start
D - 640 - sbl1_efs_handle_cookies, Delta
B - 546438 - RPM sync cookie updated
B - 550067 - SBL1, End
Android Bootloader - UART_DM Initialized!!!
[810] ERROR: Splash image header invalid
[1030] udc_start()
Raw
03-boot.log
Format: Log Type - Time(microsec) - Message
Log type: B - since boot(excluding boot rom). D - delta
B - 108824 - SBL1, Start
B - 114039 - scatterload_region && ram_init, Start
D - 30 - scatterload_region && ram_init, Delta
B - 129747 - pm_device_init, Start
D - 4117 - pm_device_init, Delta
B - 134200 - boot_flash_init, Start
D - 13176 - boot_flash_init, Delta
B - 147620 - boot_config_data_table_init, Start
D - 91 - boot_config_data_table_init, Delta
B - 153750 - sbl1_ddr_set_params, Start
B - 157593 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 172264 - pm_driver_init, Start
D - 22936 - pm_driver_init, Delta
B - 195261 - clock_init, Start
D - 183 - clock_init, Delta
B - 211365 - Image Load, Start
B - 211395 - check fota partition, Start
B - 212463 - check fota partition, Over
B - 225242 - Tz Execution, Start
D - 280661 - Tz Execution, Delta
B - 507581 - Image Load, Start
B - 507611 - check fota partition, Start
B - 509716 - check fota partition, Over
B - 520208 - Signal PBL to Jump to RPM FW
B - 520635 - Image Load, Start
B - 521733 - WDT Execution, Start
D - 1769 - WDT Execution, Delta
B - 527467 - Image Load, Start
B - 530547 - check fota partition, Start
B - 534451 - check fota partition, Over
B - 546133 - sbl1_efs_handle_cookies, Start
D - 610 - sbl1_efs_handle_cookies, Delta
B - 548115 - RPM sync cookie updated
B - 551745 - SBL1, End
Android Bootloader - UART_DM Initialized!!!
[140] ERROR: Splash image header invalid
[310] Boot Select Partition do not exists
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-g19b9a16-00073-g0865bc4 (mock_mozilla@bld-linux64-spot-393.build.releng.usw2.mozilla.com) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Thu Feb 12 04:54:40 EST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Qualcomm MSM 8610 (Flattened Device Tree), model: Qualcomm MSM 8610v2 QRD SKUAA
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-3a00000
[ 0.000000] Node qcom,msm-mem-hole removed memory 8800000-de00000
[ 0.000000] cma: CMA: reserved 4 MiB at 2f400000
[ 0.000000] cma: Found qsecom_region, memory base 0, size 1 MiB
[ 0.000000] cma: CMA: reserved 4 MiB at 3fc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c199e000 s16128 r8192 d12544 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 237824
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 androidboot.bootloader=L1TC000118D0 androidboot.emmc=true androidboot.serialno=f30ecc8f androidboot.mode=charger androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tianma_tm040ydh65_ili9806c_wvga_video
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 136MB 802MB = 938MB total
[ 0.000000] Memory: 916080k/916080k available, 44432k reserved, 266240K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c2e59c (12442 kB)
[ 0.000000] .init : 0xc0d00000 - 0xc0e5cf00 (1396 kB)
[ 0.000000] .data : 0xc0e5e000 - 0xc0f0ab44 ( 691 kB)
[ 0.000000] .bss : 0xc0f0ab68 - 0xc1066b28 (1392 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000208] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000231] pid_max: default: 32768 minimum: 301
[ 0.000510] Security Framework initialized
[ 0.000533] SELinux: Initializing.
[ 0.000672] Mount-cache hash table entries: 512
[ 0.001958] Initializing cgroup subsys debug
[ 0.001977] Initializing cgroup subsys cpuacct
[ 0.001989] Initializing cgroup subsys memory
[ 0.002042] Initializing cgroup subsys freezer
[ 0.002111] CPU: Testing write buffer coherency: ok
[ 0.002524] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002614] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.005173] Setting up static identity map for 0x895d30 - 0x895d94
[ 0.005218] Configuring XPU violations to be fatal errors
[ 0.005233] MSM Memory Dump table set up
[ 0.010121] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.010236] Brought up 2 CPUs
[ 0.010254] SMP: Total of 2 processors activated (76.80 BogoMIPS).
[ 0.025042] dummy:
[ 0.033946] NET: Registered protocol family 16
[ 0.046755] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.048996] KPI: Bootloader start count = 24849
[ 0.049008] KPI: Bootloader end count = 42063
[ 0.049019] KPI: Bootloader display count = 33746
[ 0.049029] KPI: Bootloader load kernel count = 1674
[ 0.049039] KPI: Kernel MPM timestamp = 89392
[ 0.049049] KPI: Kernel MPM Clock frequency = 32768
[ 0.049072] socinfo_print: v9, id=162, ver=1.1, raw_id=2065, raw_ver=1 ,hw_plat=11, hw_plat_ver=0
[ 0.049080] accessory_chip=0,hw_plat_subtype=0, pmic_model=65541, pmic_die_revision=131072,foundry_id=1
[ 0.065263] gpiochip_add: registered GPIOs 0 to 101 on device: msmgpio
[ 0.070169] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.102415] 8110_s1: 500 <--> 1275 mV at 0 mV normal idle
[ 0.103203] 8110_s1_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.103910] 8110_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.104559] 8110_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.105349] 8110_s3: 1200 <--> 1350 mV at 1200 mV normal idle
[ 0.106036] 8110_s4: 1800 <--> 2150 mV at 2150 mV normal idle
[ 0.106708] 8110_l1: 1225 mV normal idle
[ 0.107426] 8110_l2: 1200 mV normal idle
[ 0.108139] 8110_l3: 750 <--> 1275 mV at 0 mV normal idle
[ 0.108773] 8110_l3_ao: 750 <--> 1275 mV at 0 mV normal idle
[ 0.109442] 8110_l3_so: 750 <--> 1275 mV at 750 mV normal idle
[ 0.110438] 8110_l4: 1200 mV normal idle
[ 0.111194] 8110_l5: 1300 <--> 1350 mV at 1300 mV normal idle
[ 0.111920] 8110_l6: 1800 mV normal idle
[ 0.112587] 8110_l7: 1050 <--> 2050 mV at 1500 mV normal idle
[ 0.113360] 8110_l8: 1800 mV normal idle
[ 0.114094] 8110_l9: 2050 mV normal idle
[ 0.114778] 8110_l10: 1800 mV normal idle
[ 0.115436] 8110_l10_ao: 1800 mV normal idle
[ 0.116119] 8110_l10_so: 1800 mV normal idle
[ 0.116808] 8110_l12: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.117530] 8110_l14: 1800 mV normal idle
[ 0.118238] 8110_l15: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.118956] 8110_l16: 3000 <--> 3350 mV at 3000 mV normal idle
[ 0.119701] 8110_l17: 2900 mV normal idle
[ 0.120427] 8110_l18: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.121110] 8110_l19: 2850 mV normal idle
[ 0.121846] 8110_l20: 3075 mV normal idle
[ 0.122606] 8110_l21: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.123369] 8110_l22: 1800 <--> 3300 mV at 3300 mV normal idle
[ 0.125125] msm-thermal qcom,msm-thermal.62: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-mitigation-temp. KTM continues
[ 0.125151] msm-thermal qcom,msm-thermal.62: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
[ 0.125663] vdd_restriction_reg_init:Defer vdd rstr freq init
[ 0.125687] msm-thermal qcom,msm-thermal.62: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
[ 0.154911] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.154930] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.155720] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 0.156822] 8110_s2: 900 <--> 1275 mV at 1150 mV
[ 0.157053] spm_regulator_probe: name=8110_s2, range=LV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
[ 0.158559] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
[ 0.158707] cpr_fuse_is_setting_expected: [row:53] = 0x100000000 @25:3 == 2 ?: no
[ 0.158803] cpr_pvs_init: pvs voltage: [1050000 1150000 1275000] uV
[ 0.158818] cpr_pvs_init: ceiling voltage: [1050000 1150000 1275000] uV
[ 0.158832] cpr_pvs_init: floor voltage: [1050000 1050000 1275000] uV
[ 0.159292] cpr_fuse_is_setting_expected: [row:53] = 0x100000000 @25:3 == 2 ?: no
[ 0.159391] cpr_init_cpr_efuse: [row:61] = 0x1251639631f90
[ 0.159411] cpr_init_cpr_efuse: disable = 0, local = 1
[ 0.159424] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 711
[ 0.159437] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 710
[ 0.159451] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 1010
[ 0.159475] cpr_init_cpr_efuse: invalid quotient values
[ 0.159533] cpr_init_cpr_parameters: CPR is enabled by default.
[ 0.159553] cpr_config: Timer count: 0x17700 (for 5000 us)
[ 0.159975] apc_corner: 0 <--> 0 mV
[ 0.160780] qup_i2c f9923000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.161780] kworker/u:1 used greatest stack depth: 6148 bytes left
[ 0.162660] qup_i2c f9927000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.164907] qup_i2c f9928000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.167429] qup_i2c f9924000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.168287] qup_i2c f9925000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.170719] qup_i2c f9926000.i2c: clk_set_rate(core_clk, 19200000Hz):-1
[ 0.172534] sps:sps is ready.
[ 0.174370] gdsc_vfe:
[ 0.174856] gdsc_oxili_cx:
[ 0.175550] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 0.176874] msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
[ 0.177954] msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
[ 0.178985] msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
[ 0.180398] AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
[ 0.181124] msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
[ 0.216762] bio: create slab <bio-0> at 0
[ 0.217981] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.218651] ION heap system created
[ 0.218849] ION heap kmalloc created
[ 0.218900] ION heap qsecom created at 0x3fc00000 with size 100000
[ 0.218939] ION heap pil_1 created at 0x0c500000 with size 1300000
[ 0.218996] ION heap pil_2 created at 0x08800000 with size 3d00000
[ 0.220719] SCSI subsystem initialized
[ 0.220981] usbcore: registered new interface driver usbfs
[ 0.221106] usbcore: registered new interface driver hub
[ 0.221325] usbcore: registered new device driver usb
[ 0.221818] Linux media interface: v0.10
[ 0.221896] Linux video capture interface: v2.00
[ 0.223893] msm_iommu_dev_v0: lpass_iommu enabled remote spinlock
[ 0.225132] msm_iommu_dev_v0: device lpass_iommu mapped at f00e0000, with 4 ctx banks
[ 0.227546] msm_iommu_dev_v0: device copss_iommu mapped at f0160000, with 8 ctx banks
[ 0.228257] msm_iommu_dev_v0: device mdpe_iommu mapped at f0320000, with 2 ctx banks
[ 0.228973] msm_iommu_dev_v0: device mdps_iommu mapped at f0340000, with 2 ctx banks
[ 0.230117] msm_iommu_dev_v0: device gfx_iommu mapped at f0360000, with 3 ctx banks
[ 0.230589] msm_iommu_dev_v0: device vfe_iommu mapped at f0380000, with 1 ctx banks
[ 0.232091] msm_iommu_ctx fd000000.qcom,iommu-ctx: context q6_fw using bank 0
[ 0.232295] msm_iommu_ctx fd001000.qcom,iommu-ctx: context audio_shared using bank 1
[ 0.232488] msm_iommu_ctx fd002000.qcom,iommu-ctx: context video_shared using bank 2
[ 0.232723] msm_iommu_ctx fd003000.qcom,iommu-ctx: context q6_spare using bank 3
[ 0.232972] msm_iommu_ctx fd010000.qcom,iommu-ctx: context copss_0 using bank 0
[ 0.233372] msm_iommu_ctx fd011000.qcom,iommu-ctx: context copss_1 using bank 1
[ 0.233573] msm_iommu_ctx fd012000.qcom,iommu-ctx: context copss_2 using bank 2
[ 0.233868] msm_iommu_ctx fd013000.qcom,iommu-ctx: context copss_3 using bank 3
[ 0.234060] msm_iommu_ctx fd014000.qcom,iommu-ctx: context copss_4 using bank 4
[ 0.234252] msm_iommu_ctx fd015000.qcom,iommu-ctx: context copss_5 using bank 5
[ 0.234441] msm_iommu_ctx fd016000.qcom,iommu-ctx: context copss_6 using bank 6
[ 0.234646] msm_iommu_ctx fd017000.qcom,iommu-ctx: context copss_7 using bank 7
[ 0.234889] msm_iommu_ctx fd860000.qcom,iommu-ctx: context mdpe_0 using bank 0
[ 0.235078] msm_iommu_ctx fd861000.qcom,iommu-ctx: context mdpe_1 using bank 1
[ 0.235288] msm_iommu_ctx fd870000.qcom,iommu-ctx: context mdps_0 using bank 0
[ 0.235475] msm_iommu_ctx fd871000.qcom,iommu-ctx: context mdps_1 using bank 1
[ 0.235796] msm_iommu_ctx fd880000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 0.236153] msm_iommu_ctx fd881000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 0.236378] msm_iommu_ctx fd882000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 0.236771] msm_iommu_ctx fd890000.qcom,iommu-ctx: context vfe0 using bank 0
[ 0.237193] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.238182] Bluetooth: Core ver 2.16
[ 0.238269] NET: Registered protocol family 31
[ 0.238279] Bluetooth: HCI device and connection manager initialized
[ 0.238296] Bluetooth: HCI socket layer initialized
[ 0.238308] Bluetooth: L2CAP socket layer initialized
[ 0.238615] Bluetooth: SCO socket layer initialized
[ 0.239076] cfg80211: Calling CRDA to update world regulatory domain
[ 0.239128] cfg80211: World regulatory domain updated:
[ 0.239140] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.239158] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.239174] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.239189] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.239205] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.239220] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.239235] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 0.239396] nfc: nfc_init: NFC Core ver 0.1
[ 0.239479] NET: Registered protocol family 39
[ 0.240189] Switching to clocksource arch_sys_counter
[ 0.297775] NET: Registered protocol family 2
[ 0.298833] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.304415] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.317173] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.321421] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.321435] TCP: reno registered
[ 0.321636] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.321875] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.322467] NET: Registered protocol family 1
[ 0.323264] Trying to unpack rootfs image as initramfs...
[ 0.375685] Freeing initrd memory: 508K
[ 0.379456] clock-a7 f9011050.qcom,clock-a7: No speed/PVS binning available. Defaulting to 0!
[ 0.384314] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 0.385607] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 0.385918] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 0.387226] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 0.387526] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 0.388859] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 0.389199] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 0.390642] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 0.390946] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 0.392341] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 0.392691] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 0.394109] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 0.394459] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 0.395957] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 0.396271] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
[ 0.397756] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
[ 0.398021] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
[ 0.399554] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
[ 0.401748] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 0.408163] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 0.420994] NET: Registered protocol family 27
[ 0.425456] platform qcom,msm-audio-ion.38: Driver msm-audio-ion requests probe deferral
[ 0.433722] msm_rpmrbcpr_memalloc: Invalid num corners 4, num recmnds 3
[ 0.433782] msm_rpmrbcpr_stats: probe of fc000000.qcom,rpm-rbcpr-stats failed with error -14
[ 0.434589] msm_rpm_log_probe: OK
[ 0.471470] audit: initializing netlink socket (disabled)
[ 0.471517] type=2000 audit(0.460:1): initialized
[ 0.579515] highmem bounce pool size: 64 pages
[ 0.589993] fuse init (API version 7.18)
[ 0.590513] msgmni has been set to 1278
[ 0.592675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.592688] io scheduler noop registered
[ 0.592695] io scheduler deadline registered
[ 0.592715] io scheduler row registered
[ 0.592905] io scheduler cfq registered (default)
[ 0.592914] io scheduler test-iosched registered
[ 0.593215] gpiochip_add: registered GPIOs 444 to 447 on device: pm8110-gpio
[ 0.593529] gpiochip_add: registered GPIOs 442 to 443 on device: pm8110-mpp
[ 0.595785] mdss_dsi_panel_init: Panel Name = ili9806c wvga video mode dsi panel
[ 0.596035] mdss_dsi_panel_init:1033 Continuous splash flag enabled.
[ 0.596046] mdss_dsi_panel_init:1045 Partial update disabled.
[ 0.596087] dsi_parse_gpio:158, Disp_en gpio not specified
[ 0.596646] mdss_register_panel: adding framebuffer device fdd00000.qcom,mdss_dsi
[ 0.622807] mdp3_alloc: allocating 3280896 bytes at c3200000 (3200000 phys) for fb 0
[ 0.623086] mdss_fb_register: FrameBuffer[0] 480x854 size=3280896 registered successfully!
[ 0.665647] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[ 0.665669] AXI: get_pdata(): Error: Client name not found
[ 0.665679] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.665688] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.665810] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
[ 0.665870] msm_hsl_console_setup: console setup on port #0
[ 2.295949] console [ttyHSL0] enabled
[ 2.300035] msm_serial_hsl_init: driver initialized
[ 2.308915] diagchar initialized nowkgsl bus ib [0] = 800000000
[ 2.315233] kgsl bus ib [1] = 1600000000
[ 2.319138] kgsl bus ib [2] = 2664000000
[ 2.323093] kgsl bus index is 2 for pwrlevel 0
[ 2.327471] kgsl bus index is 1 for pwrlevel 1
[ 2.331916] kgsl bus index is 1 for pwrlevel 2
[ 2.336325] kgsl bus index is 0 for pwrlevel 3
[ 2.341726] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.359090] brd: module loaded
[ 2.364973] loop: module loaded
[ 2.367595] QSEECOM: qseecom_probe: support_bus_scaling=0x1
[ 2.372494] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
[ 2.377489] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.383063] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
[ 2.388659] QSEECOM: qseecom_probe: secure app region addr=0xda00000 size=0x100000
[ 2.396690] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 2.403123] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 2.409944] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 2.416743] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 2.423640] Loading pn547 driver
[ 2.426851] quark pn547_parse_dt enter
[ 2.430823] pn547_probe : requesting IRQ 335
[ 2.435024] quark pn547_parse_dt exit
[ 2.438876] SCSI Media Changer driver v0.25
[ 2.444064] tun: Universal TUN/TAP device driver, 1.6
[ 2.448073] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.454373] rmnet_init: BAM devices[9]
[ 2.466569] PPP generic driver version 2.4.2
[ 2.469951] PPP BSD Compression module registered
[ 2.474523] PPP Deflate Compression module registered
[ 2.480475] PPP MPPE Compression module registered
[ 2.484296] NET: Registered protocol family 24
[ 2.489119] wcnss_wlan probed in built-in mode
[ 2.495811] msm_otg f9a55000.usb: msm_otg probe
[ 2.499851] msm_otg f9a55000.usb: OTG regs = f015c000
[ 2.506602] usbcore: registered new interface driver ccid_bridge
[ 2.511757] ccid_bridge_init: success
[ 2.515213] Initializing USB Mass Storage driver...
[ 2.520139] usbcore: registered new interface driver usb-storage
[ 2.526090] USB Mass Storage support registered.
[ 2.531792] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[ 2.536698] msm_otg f9a55000.usb: phy_reset: success
[ 2.542324] mbim_init: initialize 1 instances
[ 2.546050] mbim_init: Initialized 1 ports
[ 2.552127] rndis_qc_init: initialize rndis QC instance
[ 2.557065] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.563199] android_usb gadget: Number of LUNs=3
[ 2.567771] lun0: LUN: removable file: (no medium)
[ 2.572645] lun1: LUN: removable file: (no medium)
[ 2.577490] lun2: LUN: removable file: (no medium)
[ 2.582750] android_usb gadget: android_usb ready
[ 2.589079] input: ft5x06_ts as /devices/f9923000.i2c/i2c-1/1-0038/input/input0
[ 2.780564] qup_i2c f9923000.i2c: QUP: I2C status flags :0xc1343c8, irq:127
[ 2.786499] qup_i2c f9923000.i2c: I2C slave addr:0x38 not connected
[ 2.792821] ft5x06_ts 1-0038: ft5x06_i2c_read: i2c read error.
[ 2.798551] ft5x06_ts 1-0038: version read failed
[ 2.803701] ft5x06_ts: probe of 1-0038 failed with error -107
[ 2.809283] [Richard]---------- goodix_ts_probe---------------------------
[ 2.815893] Goodix-TS 1-005d: Unable to get configure data, default will be used.
[ 2.940255] gtp_init_ext_watchdog i2c_transfer
[ 3.000498] input: Goodix-TS as /devices/f9923000.i2c/i2c-1/1-005d/input/input1
[ 3.007059] gt9xx:goodix_ts_probe() - sysfs_create_group() succeeded.
[ 3.013610] Goodix-TS 1-005d: GTP works in interrupt mode.
[ 3.050513] qup_i2c f9925000.i2c: QUP: I2C status flags :0xc1343c8, irq:129
[ 3.056448] qup_i2c f9925000.i2c: I2C slave addr:0xf not connected
[ 3.062645] kxtj9 100-000f: read err int source
[ 3.067109] kxtj9 100-000f: device not recognized
[ 3.071947] qup_i2c f9925000.i2c: QUP: I2C status flags :0xc1343c8, irq:129
[ 3.078756] qup_i2c f9925000.i2c: I2C slave addr:0xf not connected
[ 3.084946] kxtj9 100-000f: soft power off failed
[ 3.089712] kxtj9 100-000f: kxtj9_probe: kxtj9_probe err=-107
[ 3.095355] kxtj9: probe of 100-000f failed with error -107
[ 3.101300] stk3x1x_probe: driver version = 3.6.0
[ 3.105599] stk3x1x 100-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
[ 3.121867] input: stk3x1x-als as /devices/virtual/input/input2
[ 3.127029] input: stk3x1x-ps as /devices/virtual/input/input3
[ 3.133001] stk3x1x_probe: probe successfullyJerry: bma2x2_probe() tmp_chip_id = 248
[ 3.140398] Bosch Sensortec Device detected!
[ 3.140402] BMA222E registered I2C driver!
[ 3.155337] input: bma2x2 as /devices/virtual/input/input4
[ 3.160089] i2c-core: driver [bma2x2] using legacy suspend method
[ 3.165877] i2c-core: driver [bma2x2] using legacy resume method
[ 3.175467] input: compass as /devices/virtual/input/input5
[ 3.180186] st480 probe done.
[ 3.183880] using rtc device, qpnp_rtc, for alarms
[ 3.187662] stk_tune_zero_get_ps_data: ps_adc #0=81
[ 3.192727] qcom,qpnp-rtc qpnp-rtc-eed14600: rtc core: registered qpnp_rtc as rtc0
[ 3.200434] i2c /dev entries driver
[ 3.208834] msm_actuator_i2c_probe:865 msm_actuator_i2c_probe: succeeded
[ 3.215326] msm_flash_adp1660_i2c_probe: id is NULL
[ 3.219188] msm_led_get_dt_data:299 msm_led_get_dt_data failed 299
[ 3.225549] msm_flash_i2c_probe:502 msm_flash_i2c_probe failed line 502
[ 3.232143] qcom,led-flash: probe of 2-0030 failed with error -22
[ 3.238757] MSM-SENSOR-INIT msm_sensor_init_module:142 MSM_SENSOR_INIT_MODULE (null)
[ 3.247306] ov8825_init_module:141
[ 3.249699] stk_tune_zero_get_ps_data: ps_adc #1=84
[ 3.254972] ov8825_init_module:146 rc -19
[ 3.258575] s5k4e1_init_module:135
[ 3.262303] s5k4e1_init_module:140 rc -19
[ 3.266811] hi256_init_module:1576
[ 3.290053] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[ 3.296043] qup_i2c f9928000.i2c: I2C slave addr:0x20 not connected
[ 3.302300] hi256_sensor_match_id: hi256: hi256 read id failed
[ 3.308097] msm_sensor_check_id:1055 match id failed rc -107
[ 3.313728] stk_tune_zero_get_ps_data: ps_adc #2=88
[ 3.338394] msm_sensor_i2c_probe hi256 power up failed
[ 3.342526] hi256: probe of 6-007d failed with error -107
[ 3.362937] stk_tune_zero_get_ps_data: ps_adc #3=91
[ 3.424632] stk_tune_zero_get_ps_data: ps_adc #4=93
[ 3.429985] stk_ps_tune_zero_final: set HT=237,LT=187
[ 3.494018] sp1628_init_module:601
[ 3.496861] sp1628_init_module:606 rc -19
[ 3.510059] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[ 3.515997] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 3.522379] qup_i2c f9928000.i2c: QUP: I2C status flags :0xc1343c8, irq:132
[ 3.529187] qup_i2c f9928000.i2c: I2C slave addr:0x21 not connected
[ 3.535448] gc0339_match_id: SKUAA_ST_gc0339: read id failed
[ 3.541118] gc0339_power_up:234 match id failed rc -107
[ 3.546273] gc0339_power_up:241 failed
[ 3.558817] msm_sensor_i2c_probe gc0339 power up failed
[ 3.563032] gc0339: probe of 6-0078 failed with error -107
[ 3.568516] hi258_init_module:1769
[ 3.593630] 8110_l14: requested voltage range [2850000, 2850000] does not fit within constraints: [1800000, 1800000]
[ 3.603135] msm_camera_config_single_vreg: cam_vio set voltage failed
[ 3.700686] hi258_sensor_match_id: read id: d1 expected id d1:
[ 3.815426] ------------[ cut here ]------------
[ 3.819010] WARNING: at /builds/slave/b2g_m-cen_flm-kk_eng_ntly-0000/build/kernel/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x4c/0xa4()
[ 3.831758] autorequest GPIO-85
[ 3.834884] Modules linked in:
[ 3.837939] [<c010bd74>] (unwind_backtrace+0x0/0xf8) from [<c01794d4>] (warn_slowpath_common+0x4c/0x64)
[ 3.847306] [<c01794d4>] (warn_slowpath_common+0x4c/0x64) from [<c0179580>] (warn_slowpath_fmt+0x30/0x40)
[ 3.856853] [<c0179580>] (warn_slowpath_fmt+0x30/0x40) from [<c03b9608>] (gpio_ensure_requested+0x4c/0xa4)
[ 3.866489] [<c03b9608>] (gpio_ensure_requested+0x4c/0xa4) from [<c03b99e8>] (gpio_direction_output+0xbc/0x274)
[ 3.876561] [<c03b99e8>] (gpio_direction_output+0xbc/0x274) from [<c0d24878>] (hi258_init_module+0x44/0x60)
[ 3.886282] [<c0d24878>] (hi258_init_module+0x44/0x60) from [<c01005b8>] (do_one_initcall+0x10c/0x170)
[ 3.895569] [<c01005b8>] (do_one_initcall+0x10c/0x170) from [<c0d00bcc>] (kernel_init+0xf0/0x1ac)
[ 3.904424] [<c0d00bcc>] (kernel_init+0xf0/0x1ac) from [<c0106820>] (kernel_thread_exit+0x0/0x8)
[ 3.913207] ---[ end trace 2d7ed256d9eddbd0 ]---
[ 3.919952] lirc_dev: IR Remote Control driver registered, major 238
[ 3.925397] IR NEC protocol handler initialized
[ 3.929863] IR RC5(x) protocol handler initialized
[ 3.934656] IR RC6 protocol handler initialized
[ 3.939152] IR JVC protocol handler initialized
[ 3.943682] IR Sony protocol handler initialized
[ 3.948267] IR RC5 (streamzap) protocol handler initialized
[ 3.953838] IR SANYO protocol handler initialized
[ 3.958510] IR MCE Keyboard/mouse protocol handler initialized
[ 3.964343] IR LIRC bridge handler initialized
[ 3.969387] BMS: qpnp_bms_init: QPNP BMS INIT
[ 3.973222] spmi qpnp-bms-eed14400: Driver qcom,qpnp-bms requests probe deferral
[ 3.980679] spmi qpnp-charger-eed11600: Driver qcom,qpnp-charger requests probe deferral
[ 4.026411] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.034403] cpuidle: using governor ladder
[ 4.037887] cpuidle: using governor menu
[ 4.041909] sdhci: Secure Digital Host Controller Interface driver
[ 4.047955] sdhci: Copyright(c) Pierre Ossman
[ 4.053026] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.058385] AXI: get_pdata(): Error: Client name not found
[ 4.063445] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 4.075563] mmc0: no vmmc regulator found
[ 4.081994] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[ 4.088008] AXI: get_pdata(): Error: Client name not found
[ 4.093149] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 4.105729] mmc1: no vmmc regulator found
[ 4.111072] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[ 4.117716] qcom,leds-qpnp leds-qpnp-eed14c00: charger_light read ok
[ 4.127984] as364x_probe,1
[ 4.129669] as364x_probe,1
[ 4.134380] as364x_probe,418
[ 4.140636] as3647 2-0030: AS364X driver v1.1: detected AS364X compatible chip with id b2
[ 4.164523] as3647 2-0030: min_current_mA lower than possible, icreasing to 6
[ 4.170647] as364x_set_leds,172,ledMask=3,ctrl=0,curr=0
[ 4.176545] i2c-core: driver [as3647] using legacy suspend method
[ 4.181932] i2c-core: driver [as3647] using legacy resume method
[ 4.188451] usbcore: registered new interface driver usbhid
[ 4.193479] usbhid: USB HID core driver
[ 4.197918] zram: Created 1 device(s) ...
[ 4.202008] ashmem: initialized
[ 4.204466] logger: created 64K log 'log_main'
[ 4.208901] logger: created 64K log 'log_events'
[ 4.213475] mmc0: BKOPS_EN bit = 0
[ 4.213571] logger: created 64K log 'log_radio'
[ 4.213660] logger: created 64K log 'log_system'
[ 4.226026] sps:BAM 0xf9a44000 is registered.
[ 4.230101] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[ 4.237752] PMIC@SID0 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
[ 4.246468] input: qpnp_pon as /devices/virtual/input/input6
[ 4.252842] PMIC@SID0: PM8110 v2.0 options: 0, 0, 0, 0
[ 4.257337] coresight-fuse fc4be024.fuse: Fuse initialized
[ 4.263381] coresight-cti fc310000.cti: CTI initialized
[ 4.267854] coresight-cti fc311000.cti: CTI initialized
[ 4.273044] mmc0: new HS200 MMC card at address 0001
[ 4.273095] coresight-cti fc312000.cti: CTI initialized
[ 4.273270] coresight-cti fc313000.cti: CTI initialized
[ 4.273440] coresight-cti fc314000.cti: CTI initialized
[ 4.273596] coresight-cti fc315000.cti: CTI initialized
[ 4.273763] coresight-cti fc316000.cti: CTI initialized
[ 4.273920] coresight-cti fc317000.cti: CTI initialized
[ 4.274087] coresight-cti fc318000.cti: CTI initialized
[ 4.274248] coresight-cti fc351000.cti: CTI initialized
[ 4.274418] coresight-cti fc352000.cti: CTI initialized
[ 4.274608] coresight-cti fc353000.cti: CTI initialized
[ 4.274780] coresight-cti fc354000.cti: CTI initialized
[ 4.274940] coresight-cti fc335000.cti: CTI initialized
[ 4.275113] coresight-cti fc338000.cti: CTI initialized
[ 4.275277] coresight-cti fc33c000.cti: CTI initialized
[ 4.275466] coresight-cti fc360000.cti: CTI initialized
[ 4.276025] coresight-csr fc301000.csr: CSR initialized
[ 4.362323] mmcblk0: mmc0:0001 K7XVMB 7.28 GiB
[ 4.364389] coresight-tmc fc326000.tmc: Byte Counter feature enabled
[ 4.364443] sps:BAM 0xfc37c000 is registered.
[ 4.364731] coresight-tmc fc326000.tmc: TMC initialized
[ 4.365173] coresight-tmc fc325000.tmc: TMC initialized
[ 4.366122] coresight-tpiu fc320000.tpiu: seta gpios not specified
[ 4.366132] coresight-tpiu fc320000.tpiu: setb gpios not specified
[ 4.366251] coresight-tpiu fc320000.tpiu: TPIU initialized
[ 4.366829] coresight-funnel fc323000.funnel: FUNNEL initialized
[ 4.366982] coresight-funnel fc321000.funnel: FUNNEL initialized
[ 4.367122] coresight-funnel fc322000.funnel: FUNNEL initialized
[ 4.367273] coresight-funnel fc355000.funnel: FUNNEL initialized
[ 4.367800] coresight-replicator fc324000.replicator: REPLICATOR initialized
[ 4.368458] coresight-stm fc302000.stm: STM initialized
[ 4.369039] coresight-hwevent fd820018.hwevent: Hardware Event driver initialized
[ 4.369767] coresight-etm fc34c000.etm: ETM initialized
[ 4.453891] coresight-etm fc34d000.etm: ETM initialized
[ 4.458942] mmcblk0rpmb: mmc0:0001 K7XVMB partition 3 512 KiB
[ 4.459297] coresight-etm fc34e000.etm: ETM initialized
[ 4.459639] coresight-etm fc34f000.etm: ETM initialized
[ 4.460432] coresight-audio-etm audio_etm0.1: Audio ETM initialized
[ 4.461016] coresight-modem-etm modem_etm0.2: Modem ETM initialized
[ 4.461552] coresight-wcn-etm wcn_etm0.3: Wireless ETM initialized
[ 4.462069] coresight-rpm-etm rpm_etm0.4: RPM ETM initialized
[ 4.463302] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 4.463323] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 4.472367] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[ 4.472967] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[ 4.473844] platform qcom,msm-voip-dsp.54: Driver msm-voip-dsp requests probe deferral
[ 4.474273] platform qcom,msm-pcm-voice.55: Driver msm-pcm-voice requests probe deferral
[ 4.477903] platform sound.46: Driver msm8x10-asoc-wcd requests probe deferral
[ 4.478295] Netfilter messages via NETLINK v0.30.
[ 4.478389] nf_conntrack version 0.5.0 (14449 buckets, 57796 max)
[ 4.479312] ctnetlink v0.93: registering with nfnetlink.
[ 4.479724] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.479732] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.480096] xt_time: kernel timezone is -0000
[ 4.480695] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.480984] arp_tables: (C) 2002 David S. Miller
[ 4.481086] TCP: cubic registered
[ 4.482040] NET: Registered protocol family 10
[ 4.485428] Mobile IPv6
[ 4.485475] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.485676] IPv6 over IPv4 tunneling driver
[ 4.486356] NET: Registered protocol family 17
[ 4.486498] Bridge firewalling registered
[ 4.486519] Ebtables v2.0 registered
[ 4.626186] Bluetooth: RFCOMM TTY layer initialized
[ 4.630980] Bluetooth: RFCOMM socket layer initialized
[ 4.636077] Bluetooth: RFCOMM ver 1.11
[ 4.639876] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.645119] Bluetooth: BNEP filters: protocol multicast
[ 4.650320] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.656398] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
[ 4.668075] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 4.675736] Registering SWP/SWPB emulation handler
[ 4.736689] platform sound.46: Driver msm8x10-asoc-wcd requests probe deferral
[ 4.744665] input: gpio-keys as /devices/gpio_keys.69/input/input7
[ 4.745376] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 4.745385] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 4.745406] platform qcom,msm-pcm-voice.55: Driver msm-pcm-voice requests probe deferral
[ 4.745623] voice_alloc_cal_mem_map_table: audio ION alloc failed, rc = -517
[ 4.745631] voc_alloc_cal_shared_memory: Failed to allocate cal memory, err=-517
[ 4.745647] platform qcom,msm-voip-dsp.54: Driver msm-voip-dsp requests probe deferral
[ 4.745759] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 4.745775] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 4.753523] batfet:
[ 4.778214] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
[ 4.822096] qcom,qpnp-rtc qpnp-rtc-eed14600: setting system clock to 1970-01-01 00:08:50 UTC (530)
[ 4.833309] msm_thermal: Interrupt mode init
[ 4.836878] msm_thermal: Invalid input
[ 4.840821] clock_late_init: Removing enables held for handed-off clocks
[ 4.850560] ALSA device list:
[ 4.852495] No soundcards f�[ 4.856858] Freeing init memory: 368K
[ 4.902432] type=1403 audit(530.570:2): policy loaded auid=4294967295 ses=4294967295
[ 4.909849] SELinux: Loaded policy from /sepolicy
[ 4.917202] type=1404 audit(530.590:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.950522] msm_otg f9a55000.usb: Avail curr from USB = 1500
[ 4.957358] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[ 5.077636] BMS: qpnp_bms_probe: probe success: soc =23 vbatt = 3755814 ocv = 3752865 r_sense_uohm = 9078 warm_reset = 0
[ 5.087954] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.095377] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 5.104425] platform sound.46: Driver msm8x10-asoc-wcd requests probe deferral
[ 5.110784] msm8x10-wcd-i2c-core 5-000d: defering msm8x10_wcd_i2c_probe, adsp_state 0
[ 5.118727] i2c 5-000d: Driver msm8x10-wcd-i2c-core requests probe deferral
[ 6.868730] msm_otg f9a55000.usb: Avail curr from USB = 0
[ 6.873343] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_DISCONNECT_EVENT received
[ 6.880732] android_work: android_work: did not send uevent (0 0 (null))
[ 6.891012] msm_otg f9a55000.usb: USB in low power mode
[ 8.922727] msm_otg f9a55000.usb: USB exited from low power mode
[ 9.052753] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[ 9.590826] init: /init.qcom.rc: 733: invalid command 'rmmod'
[ 9.597103] init: init.target.rc: 82: ignored duplicate definition of service 'qcomsysd'
[ 9.604614] init: /init.bluetooth.rc: 19: ignored duplicate definition of service 'bluetoothd'
[ 9.612906] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 9.625274] init: invalid uid 'fm_radio'
[ 10.201368] init: cannot open '/initlogo.rle'
[ 10.219963] init: Unable to open persistent property directory /data/property errno: 2
[ 10.227441] init: Detected MSM SOC ID=162 SOC VER=0 BOARD TYPE=QRD
[ 10.233261] init: failed to open '/sys/class/graphics/fb1/msm_fb_type'
[ 10.239546] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
[ 10.247876] type=1400 audit(535.910:4): avc: denied { entrypoint } for pid=168 comm="init" path="/sbin/healthd" dev="rootfs" ino=4205 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
[ 10.250388] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 10.250408] init: powerctl: cannot expand '${sys.powerctl}'
[ 10.250427] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 10.250442] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 10.250461] init: property 'persist.sys.usb.config' doesn't exist while expanding '${persist.sys.usb.config}'
[ 10.250475] init: cannot expand '${persist.sys.usb.config}' while assigning to 'sys.usb.config'
[ 10.250559] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
[ 10.250597] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
[ 10.250726] enable_store: android_usb: already disabled
[ 10.251129] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[ 10.252911] charger:
[ 10.252933] charger: *************** LAST KMSG ***************
[ 10.252944] charger:
[ 10.252987] charger: last_kmsg not found. Cold reset?
[ 10.252996] charger:
[ 10.253004] charger: ************* END LAST KMSG *************
[ 10.253013] charger:
[ 10.253205] charger: --------------- STARTING CHARGER MODE ---------------
[ 10.253953] charger: Exit from alarm thread
[ 10.383512] healthd: wakealarm_init: timerfd_create failed
[ 10.388009] msm_otg f9a55000.usb: Avail curr from USB = 100
[ 10.393924] android_work: android_work: did not send uevent (0 0 (null))
[ 10.497982] charger: power supply 'battery' not found ('Battery' 1)
[ 10.503354] charger: power supply bms (Unknown) offline (action=add num_online=0 num_supplies=1)
[ 10.512363] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=2)
[ 10.552935] android_work: android_work: sent uevent USB_STATE=CONNECTED
[ 10.558743] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
[ 10.637520] charger: power supply usb (USB) online (action=change num_online=1 num_supplies=2)
[ 10.645259] charger: power supply battery (Battery) (action=add num_online=1 num_supplies=3)
[ 10.665428] charger: Disabling backlight
[ 10.739793] android_work: android_work: sent uevent USB_STATE=CONNECTED
[ 10.741535] android_usb gadget: high-speed config #1: fe8050c8.android_usb
[ 10.741572] msm_otg f9a55000.usb: Avail curr from USB = 500
[ 10.800381] android_work: android_work: sent uevent USB_STATE=CONFIGURED
[ 10.864628] mdp3_iommu_dettach: mdp iommu not attached
[ 10.890296] goodix_ts_suspend i2c_transfer
[ 11.343470] goodix_ts_resume i2c_transfer
[ 11.450272] gtp_init_ext_watchdog i2c_transfer
[ 11.451400] Goodix-TS 1-005d: GTP wakeup sleep.
[ 11.520271] gtp_init_ext_watchdog i2c_transfer
[ 11.537894] charger: Enabling backlight
[ 11.630649] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 11.638611] charger: power supply usb (USB) online (action=change num_online=1 num_supplies=3)
[ 11.647233] charger: power supply usb (USB) online (action=change num_online=1 num_supplies=3)
[ 11.655883] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 11.664657] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 11.673414] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 11.682179] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 12.496102] goodix_ts_resume i2c_transfer
[ 12.499119] charger: Enabling backlight
[ 13.290938] goodix_ts_resume i2c_transfer
[ 13.294171] charger: Enabling backlight
[ 14.069200] goodix_ts_resume i2c_transfer
[ 14.072466] charger: Enabling backlight
[ 22.625595] charger: Disabling backlight
[ 22.870351] goodix_ts_suspend i2c_transfer
[ 45.123586] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 45.149983] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 65.141167] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 65.177709] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 125.123517] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 125.149984] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 185.141171] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 185.154365] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 305.139161] kworker/0:0 used greatest stack depth: 6020 bytes left
[ 305.216601] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 305.257806] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
[ 311.460346] kworker/0:1 used greatest stack depth: 5856 bytes left
[ 405.136749] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=3)
[ 405.176548] charger: power supply bms (Unknown) offline (action=change num_online=1 num_supplies=3)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment