Updated service type to work with OpenBSD

gistfile1.rb

# This is our main way of managing processes right now.
#
# a service is distinct from a process in that services
# can only be managed through the interface of an init script
# which is why they have a search path for initscripts and such


module Puppet

  newtype(:service) do
    @doc = "Manage running services.  Service support unfortunately varies
      widely by platform --- some platforms have very little if any concept of a
      running service, and some have a very codified and powerful concept.
      Puppet's service support is usually capable of doing the right thing, but
      the more information you can provide, the better behaviour you will get.

      Puppet 2.7 and newer expect init scripts to have a working status command.
      If this isn't the case for any of your services' init scripts, you will
      need to set `hasstatus` to false and possibly specify a custom status
      command in the `status` attribute.

      Note that if a `service` receives an event from another resource,
      the service will get restarted. The actual command to restart the
      service depends on the platform. You can provide an explicit command for
      restarting with the `restart` attribute, or you can set `hasrestart` to
      true to use the init script's restart command; if you do neither, the
      service's stop and start commands will be used."

    feature :refreshable, "The provider can restart the service.",
      :methods => [:restart]

    feature :enableable, "The provider can enable and disable the service",
      :methods => [:disable, :enable, :enabled?]

    feature :controllable, "The provider uses a control variable."

    feature :flaggable, "The provider can pass flags to the service."

    newproperty(:enable, :required_features => :enableable) do
      desc "Whether a service should be enabled to start at boot.
        This property behaves quite differently depending on the platform;
        wherever possible, it relies on local tools to enable or disable
        a given service."

      newvalue(:true, :event => :service_enabled) do
        provider.enable
      end

      newvalue(:false, :event => :service_disabled) do
        provider.disable
      end

      newvalue(:manual, :event => :service_manual_start) do
        provider.manual_start
      end

      def retrieve
        provider.enabled?
      end

      validate do |value|
        if value == :manual and !Puppet.features.microsoft_windows?
          raise Puppet::Error.new("Setting enable to manual is only supported on Microsoft Windows.")
        end
      end
    end

    # Handle whether the service should actually be running right now.
    newproperty(:ensure) do
      desc "Whether a service should be running."

      newvalue(:stopped, :event => :service_stopped) do
        provider.stop
      end

      newvalue(:running, :event => :service_started, :invalidate_refreshes => true) do
        provider.start
      end

      aliasvalue(:false, :stopped)
      aliasvalue(:true, :running)

      def retrieve
        provider.status
      end

      def sync
        event = super()

        if property = @resource.property(:enable)
          val = property.retrieve
          property.sync unless property.safe_insync?(val)
        end

        event
      end
    end

    newproperty(:flags, :required_features => :flaggable) do
      desc "Specify a string of flags to pass to the startup script."

      defaultto ""
    end

    newparam(:binary) do
      desc "The path to the daemon.  This is only used for
        systems that do not support init scripts.  This binary will be
        used to start the service if no `start` parameter is
        provided."
    end

    newparam(:hasstatus) do
      desc "Declare whether the service's init script has a functional status
        command; defaults to `true`. This attribute's default value changed in
        Puppet 2.7.0.

        The init script's status command must return 0 if the service is
        running and a nonzero value otherwise. Ideally, these exit codes
        should conform to [the LSB's specification][lsb-exit-codes] for init
        script status actions, but Puppet only considers the difference
        between 0 and nonzero to be relevant.

        If a service's init script does not support any kind of status command,
        you should set `hasstatus` to false and either provide a specific
        command using the `status` attribute or expect that Puppet will look for
        the service name in the process table. Be aware that 'virtual' init
        scripts (like 'network' under Red Hat systems) will respond poorly to
        refresh events from other resources if you override the default behavior
        without providing a status command."

      newvalues(:true, :false)

      defaultto :true
    end
    newparam(:name) do
      desc <<-EOT
        The name of the service to run.

        This name is used to find the service; on platforms where services
        have short system names and long display names, this should be the
        short name. (To take an example from Windows, you would use "wuauserv"
        rather than "Automatic Updates.")
      EOT
      isnamevar
    end

    newparam(:path) do
      desc "The search path for finding init scripts.  Multiple values should
        be separated by colons or provided as an array."

      munge do |value|
        value = [value] unless value.is_a?(Array)
        value.flatten.collect { |p| p.split(File::PATH_SEPARATOR) }.flatten
      end

      defaultto { provider.class.defpath if provider.class.respond_to?(:defpath) }
    end
    newparam(:pattern) do
      desc "The pattern to search for in the process table.
        This is used for stopping services on platforms that do not
        support init scripts, and is also used for determining service
        status on those service whose init scripts do not include a status
        command.

        Defaults to the name of the service. The pattern can be a simple string
        or any legal Ruby pattern."

      defaultto { @resource[:binary] || @resource[:name] }
    end
    newparam(:restart) do
      desc "Specify a *restart* command manually.  If left
        unspecified, the service will be stopped and then started."
    end
    newparam(:start) do
      desc "Specify a *start* command manually.  Most service subsystems
        support a `start` command, so this will not need to be
        specified."
    end
    newparam(:status) do
      desc "Specify a *status* command manually.  This command must
        return 0 if the service is running and a nonzero value otherwise.
        Ideally, these exit codes should conform to [the LSB's
        specification][lsb-exit-codes] for init script status actions, but
        Puppet only considers the difference between 0 and nonzero to be
        relevant.

        If left unspecified, the status of the service will be determined
        automatically, usually by looking for the service in the process
        table.

        [lsb-exit-codes]: http://refspecs.linuxfoundation.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html"
    end

    newparam(:stop) do
      desc "Specify a *stop* command manually."
    end

    newparam(:control) do
      desc "The control variable used to manage services (originally for HP-UX).
        Defaults to the upcased service name plus `START` replacing dots with
        underscores, for those providers that support the `controllable` feature."
      defaultto { resource.name.gsub(".","_").upcase + "_START" if resource.provider.controllable? }
    end

    newparam :hasrestart do
      desc "Specify that an init script has a `restart` command.  If this is
        false and you do not specify a command in the `restart` attribute,
        the init script's `stop` and `start` commands will be used.

        Defaults to false."
      newvalues(:true, :false)
    end

    newparam(:manifest) do
      desc "Specify a command to config a service, or a path to a manifest to do so."
    end

    # Basically just a synonym for restarting.  Used to respond
    # to events.
    def refresh
      # Only restart if we're actually running
      if (@parameters[:ensure] || newattr(:ensure)).retrieve == :running
        provider.restart
      else
        debug "Skipping restart; service is not running"
      end
    end
  end
end