Created
June 20, 2013 18:53
-
-
Save zachgoldstein/5825526 to your computer and use it in GitHub Desktop.
hostapd -dd logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
root@raspbx:~# sudo hostapd -dd /etc/hostapd/hostapd.conf | |
random: Trying to read entropy from /dev/random | |
Configuration file: /etc/hostapd/hostapd.conf | |
ctrl_interface_group=0 | |
nl80211: interface wlan0 in phy phy0 | |
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 | |
nl80211: Using driver-based off-channel TX | |
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) | |
nl80211: Register frame match - hexdump(len=2): 04 0a | |
nl80211: Failed to register Action frame processing - ignore for now | |
nl80211: Interface wlan0 is in bridge br0 | |
nl80211: Add own interface ifindex 4 | |
nl80211: Add own interface ifindex 3 | |
nl80211: Set mode ifindex 3 iftype 3 (AP) | |
nl80211: Create interface iftype 6 (MONITOR) | |
Failed to create interface mon.wlan0: -23 (Too many open files in system) | |
Try to remove and re-create mon.wlan0 | |
nl80211: Remove interface ifindex=5 | |
nl80211: Create interface iftype 6 (MONITOR) | |
nl80211: New interface mon.wlan0 created: ifindex=6 | |
nl80211: Add own interface ifindex 6 | |
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) | |
nl80211: Regulatory information - country=00 | |
nl80211: 2402-2472 @ 40 MHz | |
nl80211: 2457-2482 @ 40 MHz | |
nl80211: 2474-2494 @ 20 MHz | |
nl80211: 5170-5250 @ 40 MHz | |
nl80211: 5735-5835 @ 40 MHz | |
nl80211: 57240-63720 @ 2160 MHz | |
nl80211: Added 802.11b mode based on 802.11g information | |
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm | |
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm | |
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm | |
Completing interface initialization | |
Mode: IEEE 802.11g Channel: 8 Frequency: 2447 MHz | |
nl80211: Set freq 2447 (ht_enabled=1 sec_channel_offset=0) | |
RATE[0] rate=10 flags=0x1 | |
RATE[1] rate=20 flags=0x1 | |
RATE[2] rate=55 flags=0x1 | |
RATE[3] rate=110 flags=0x1 | |
RATE[4] rate=60 flags=0x0 | |
RATE[5] rate=90 flags=0x0 | |
RATE[6] rate=120 flags=0x0 | |
RATE[7] rate=180 flags=0x0 | |
RATE[8] rate=240 flags=0x0 | |
RATE[9] rate=360 flags=0x0 | |
RATE[10] rate=480 flags=0x0 | |
RATE[11] rate=540 flags=0x0 | |
Flushing old station entries | |
Deauthenticate all stations | |
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 | |
Using interface wlan0 with hwaddr 00:0f:54:13:e2:d9 and ssid 'QuietCoachNetwork' | |
Deriving WPA PSK based on passphrase | |
SSID - hexdump_ascii(len=17): | |
51 75 69 65 74 43 6f 61 63 68 4e 65 74 77 6f 72 QuietCoachNetwor | |
6b k | |
PSK (ASCII passphrase) - hexdump_ascii(len=18): [REMOVED] | |
PSK (from passphrase) - hexdump(len=32): [REMOVED] | |
random: Got 20/20 bytes from /dev/random | |
Get randomness: len=32 entropy=0 | |
GMK - hexdump(len=32): [REMOVED] | |
Get randomness: len=32 entropy=0 | |
Key Counter - hexdump(len=32): [REMOVED] | |
WPA: Delay group state machine start until Beacon frames have been configured | |
RSN pre-auth interface 'wlan0' | |
Using existing control interface directory. | |
ctrl_iface bind(PF_UNIX) failed: Address already in use | |
ctrl_iface exists and seems to be in use - cannot override it | |
Delete '/var/run/hostapd/wlan0' manually if it is not used anymore | |
Failed to setup control interface | |
wlan0: Unable to setup interface. | |
Flushing old station entries | |
Deauthenticate all stations | |
nl80211: Remove interface ifindex=6 | |
netlink: Operstate: linkmode=0, operstate=6 | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Try mode change after setting interface down | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Set mode ifindex 3 iftype 2 (STATION) | |
nl80211: Failed to set interface 3 to mode 2: -16 (Device or resource busy) | |
nl80211: Interface mode change to 2 from 3 failed | |
root@raspbx:~# service hostapd stop | |
[ ok ] Stopping advanced IEEE 802.11 management: hostapd. | |
root@raspbx:~# sudo hostapd -dd /etc/hostapd/hostapd.conf | |
random: Trying to read entropy from /dev/random | |
Configuration file: /etc/hostapd/hostapd.conf | |
ctrl_interface_group=0 | |
nl80211: interface wlan0 in phy phy0 | |
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 | |
nl80211: Using driver-based off-channel TX | |
nl80211: Add own interface ifindex 4 | |
nl80211: Add own interface ifindex 3 | |
nl80211: Set mode ifindex 3 iftype 3 (AP) | |
nl80211: Create interface iftype 6 (MONITOR) | |
nl80211: New interface mon.wlan0 created: ifindex=7 | |
nl80211: Add own interface ifindex 7 | |
nl80211: Adding interface wlan0 into bridge br0 | |
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) | |
nl80211: Regulatory information - country=00 | |
nl80211: 2402-2472 @ 40 MHz | |
nl80211: 2457-2482 @ 40 MHz | |
nl80211: 2474-2494 @ 20 MHz | |
nl80211: 5170-5250 @ 40 MHz | |
nl80211: 5735-5835 @ 40 MHz | |
nl80211: 57240-63720 @ 2160 MHz | |
nl80211: Added 802.11b mode based on 802.11g information |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment