Created
February 6, 2018 17:20
-
-
Save zavorka/6fc73856075c169add34e6a9d4badbd3 to your computer and use it in GitHub Desktop.
lsusb-output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 3.10 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 3 | |
| bMaxPacketSize0 9 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0003 3.0 root hub | |
| bcdDevice 4.14 | |
| iManufacturer 3 Linux 4.14.15-gentoo-ng xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:05:00.0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Hub Descriptor: | |
| bLength 12 | |
| bDescriptorType 42 | |
| nNbrPorts 2 | |
| wHubCharacteristic 0x000a | |
| No power switching (usb 1.0) | |
| Per-port overcurrent protection | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| bHubDecLat 0.0 micro seconds | |
| wHubDelay 0 nano seconds | |
| DeviceRemovable 0x00 | |
| Hub Port Status: | |
| Port 1: 0000.02a0 lowspeed L1 | |
| Port 2: 0000.02a0 lowspeed L1 | |
| Binary Object Store Descriptor: | |
| bLength 5 | |
| bDescriptorType 15 | |
| wTotalLength 43 | |
| bNumDeviceCaps 2 | |
| SuperSpeed USB Device Capability: | |
| bLength 10 | |
| bDescriptorType 16 | |
| bDevCapabilityType 3 | |
| bmAttributes 0x02 | |
| Latency Tolerance Messages (LTM) Supported | |
| wSpeedsSupported 0x0008 | |
| Device can operate at SuperSpeed (5Gbps) | |
| bFunctionalitySupport 3 | |
| Lowest fully-functional device speed is SuperSpeed (5Gbps) | |
| bU1DevExitLat 0 micro seconds | |
| bU2DevExitLat 0 micro seconds | |
| SuperSpeedPlus USB Device Capability: | |
| bLength 28 | |
| bDescriptorType 16 | |
| bDevCapabilityType 10 | |
| bmAttributes 0x00000023 | |
| Sublink Speed Attribute count 3 | |
| Sublink Speed ID count 1 | |
| wFunctionalitySupport 0x0001 | |
| bmSublinkSpeedAttr[0] 0x00050034 | |
| Speed Attribute ID: 4 5Gb/s Symmetric RX SuperSpeed | |
| bmSublinkSpeedAttr[1] 0x000500b4 | |
| Speed Attribute ID: 4 5Gb/s Symmetric TX SuperSpeed | |
| bmSublinkSpeedAttr[2] 0x000a4035 | |
| Speed Attribute ID: 5 10Gb/s Symmetric RX SuperSpeedPlus | |
| bmSublinkSpeedAttr[3] 0x000a40b5 | |
| Speed Attribute ID: 5 10Gb/s Symmetric TX SuperSpeedPlus | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 003 Device 004: ID 1c11:b04d | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 64 | |
| idVendor 0x1c11 | |
| idProduct 0xb04d | |
| bcdDevice 2.ef | |
| iManufacturer 1 Input Club | |
| iProduct 2 Keyboard - WhiteFox:truefox PixelMap USB | |
| iSerial 3 7251000070710027000B400831384E45 - mk20dx256 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Device Status: 0x0000 | |
| (Bus Powered) | |
| Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 1 Single TT | |
| bMaxPacketSize0 64 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0002 2.0 root hub | |
| bcdDevice 4.14 | |
| iManufacturer 3 Linux 4.14.15-gentoo-ng xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:05:00.0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Hub Descriptor: | |
| bLength 9 | |
| bDescriptorType 41 | |
| nNbrPorts 2 | |
| wHubCharacteristic 0x000a | |
| No power switching (usb 1.0) | |
| Per-port overcurrent protection | |
| TT think time 8 FS bits | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| DeviceRemovable 0x00 | |
| PortPwrCtrlMask 0xff | |
| Hub Port Status: | |
| Port 1: 0000.0100 power | |
| Port 2: 0000.0103 power enable connect | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 3.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 3 | |
| bMaxPacketSize0 9 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0003 3.0 root hub | |
| bcdDevice 4.14 | |
| iManufacturer 3 Linux 4.14.15-gentoo-ng xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:00:14.0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Hub Descriptor: | |
| bLength 12 | |
| bDescriptorType 42 | |
| nNbrPorts 10 | |
| wHubCharacteristic 0x000a | |
| No power switching (usb 1.0) | |
| Per-port overcurrent protection | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| bHubDecLat 0.0 micro seconds | |
| wHubDelay 0 nano seconds | |
| DeviceRemovable 0x00 0x00 | |
| Hub Port Status: | |
| Port 1: 0000.02a0 5Gbps power Rx.Detect | |
| Port 2: 0000.02a0 5Gbps power Rx.Detect | |
| Port 3: 0000.02a0 5Gbps power Rx.Detect | |
| Port 4: 0000.02a0 5Gbps power Rx.Detect | |
| Port 5: 0000.02a0 5Gbps power Rx.Detect | |
| Port 6: 0000.02a0 5Gbps power Rx.Detect | |
| Port 7: 0000.02a0 5Gbps power Rx.Detect | |
| Port 8: 0000.02a0 5Gbps power Rx.Detect | |
| Port 9: 0000.02a0 5Gbps power Rx.Detect | |
| Port 10: 0000.02a0 5Gbps power Rx.Detect | |
| Binary Object Store Descriptor: | |
| bLength 5 | |
| bDescriptorType 15 | |
| wTotalLength 15 | |
| bNumDeviceCaps 1 | |
| SuperSpeed USB Device Capability: | |
| bLength 10 | |
| bDescriptorType 16 | |
| bDevCapabilityType 3 | |
| bmAttributes 0x02 | |
| Latency Tolerance Messages (LTM) Supported | |
| wSpeedsSupported 0x0008 | |
| Device can operate at SuperSpeed (5Gbps) | |
| bFunctionalitySupport 3 | |
| Lowest fully-functional device speed is SuperSpeed (5Gbps) | |
| bU1DevExitLat 10 micro seconds | |
| bU2DevExitLat 512 micro seconds | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 001 Device 080: ID 046d:c52b Logitech, Inc. Unifying Receiver | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 8 | |
| idVendor 0x046d Logitech, Inc. | |
| idProduct 0xc52b Unifying Receiver | |
| bcdDevice 12.03 | |
| iManufacturer 1 Logitech | |
| iProduct 2 USB Receiver | |
| iSerial 0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0000 | |
| (Bus Powered) | |
| Bus 001 Device 079: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 2 TT per port | |
| bMaxPacketSize0 64 | |
| idVendor 0x0424 Standard Microsystems Corp. | |
| idProduct 0x2514 USB 2.0 Hub | |
| bcdDevice b.b3 | |
| iManufacturer 0 | |
| iProduct 0 | |
| iSerial 0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Hub Descriptor: | |
| bLength 9 | |
| bDescriptorType 41 | |
| nNbrPorts 4 | |
| wHubCharacteristic 0x0009 | |
| Per-port power switching | |
| Per-port overcurrent protection | |
| TT think time 8 FS bits | |
| bPwrOn2PwrGood 50 * 2 milli seconds | |
| bHubContrCurrent 1 milli Ampere | |
| DeviceRemovable 0x00 | |
| PortPwrCtrlMask 0xff | |
| Hub Port Status: | |
| Port 1: 0000.0100 power | |
| Port 2: 0000.0103 power enable connect | |
| Port 3: 0000.0100 power | |
| Port 4: 0000.0100 power | |
| Device Qualifier (for other device speed): | |
| bLength 10 | |
| bDescriptorType 6 | |
| bcdUSB 2.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 Full speed (or root) hub | |
| bMaxPacketSize0 64 | |
| bNumConfigurations 1 | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 001 Device 078: ID 08e4:0163 Pioneer Corp. | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 64 | |
| idVendor 0x08e4 Pioneer Corp. | |
| idProduct 0x0163 | |
| bcdDevice 10.00 | |
| iManufacturer 1 PIONEER CORPORATION | |
| iProduct 2 DJM-850 | |
| iSerial 0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0001 | |
| Self Powered | |
| Bus 001 Device 104: ID 15ba:002a Olimex Ltd. ARM-USB-TINY-H JTAG interface | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 64 | |
| idVendor 0x15ba Olimex Ltd. | |
| idProduct 0x002a ARM-USB-TINY-H JTAG interface | |
| bcdDevice 7.00 | |
| iManufacturer 1 | |
| iProduct 2 Olimex OpenOCD JTAG ARM-USB-TINY-H | |
| iSerial 3 OL4CE9CD | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Device Qualifier (for other device speed): | |
| bLength 10 | |
| bDescriptorType 6 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 64 | |
| bNumConfigurations 1 | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0000 | |
| (Bus Powered) | |
| Bus 001 Device 107: ID 6666:5119 Prototype product Vendor ID | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 0 | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 0 | |
| bMaxPacketSize0 64 | |
| idVendor 0x6666 Prototype product Vendor ID | |
| idProduct 0x5119 | |
| bcdDevice 1.00 | |
| iManufacturer 1 libopencm3.org | |
| iProduct 2 MIDI demo | |
| iSerial 3 323832330847333122003400 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: 0x0000 | |
| (Bus Powered) | |
| Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub | |
| Device Descriptor: | |
| bLength 18 | |
| bDescriptorType 1 | |
| bcdUSB 2.00 | |
| bDeviceClass 9 Hub | |
| bDeviceSubClass 0 | |
| bDeviceProtocol 1 Single TT | |
| bMaxPacketSize0 64 | |
| idVendor 0x1d6b Linux Foundation | |
| idProduct 0x0002 2.0 root hub | |
| bcdDevice 4.14 | |
| iManufacturer 3 Linux 4.14.15-gentoo-ng xhci-hcd | |
| iProduct 2 xHCI Host Controller | |
| iSerial 1 0000:00:14.0 | |
| bNumConfigurations 1 | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Couldn't get configuration descriptor 0, some information will be missing | |
| Hub Descriptor: | |
| bLength 13 | |
| bDescriptorType 41 | |
| nNbrPorts 16 | |
| wHubCharacteristic 0x000a | |
| No power switching (usb 1.0) | |
| Per-port overcurrent protection | |
| TT think time 8 FS bits | |
| bPwrOn2PwrGood 10 * 2 milli seconds | |
| bHubContrCurrent 0 milli Ampere | |
| DeviceRemovable 0x00 0x00 0x00 | |
| PortPwrCtrlMask 0xff 0xff 0xff | |
| Hub Port Status: | |
| Port 1: 0000.0103 power enable connect | |
| Port 2: 0000.0100 power | |
| Port 3: 0000.0503 highspeed power enable connect | |
| Port 4: 0000.0100 power | |
| Port 5: 0000.0100 power | |
| Port 6: 0000.0100 power | |
| Port 7: 0000.0100 power | |
| Port 8: 0000.0503 highspeed power enable connect | |
| Port 9: 0000.0100 power | |
| Port 10: 0000.0100 power | |
| Port 11: 0000.0503 highspeed power enable connect | |
| Port 12: 0000.0100 power | |
| Port 13: 0000.0100 power | |
| Port 14: 0000.0100 power | |
| Port 15: 0000.0100 power | |
| Port 16: 0000.0100 power | |
| can't get device qualifier: Resource temporarily unavailable | |
| can't get debug descriptor: Resource temporarily unavailable | |
| Device Status: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment