TubeZB CC2652P2 Ethernet/USB Coordinator ESPHome BLE Proxy

tubezb-cc2652p2-ethusb-2023.yaml

substitutions:
  name: tubezb-cc2652p2-ethusb-2023
  friendly_name: TubesZB and Bluetooth Proxy

esphome:
  name:  ${name}
  friendly_name: ${friendly_name}

esp32:
  board: esp32doit-devkit-v1
  #board: esp-wrover-kit
  framework:
    #type: arduino # not recommended, higher memory usage
    type: esp-idf


external_components:
  - source: github://oxan/esphome-stream-server

#WT32-ETH01 Ethernet
ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO0_IN
  phy_addr: 1
  power_pin: GPIO16

# Enable logging
logger:
  level: DEBUG
  
# Enable Home Assistant API
api:
  reboot_timeout: 0s

ota:

# not recommended, higher memory usage
# web_server:
#   port: 80


script:
  - id: fw_update_mode
    then:
      - switch.turn_on: zBSL
      - delay: 1s
      - switch.turn_on: zRST_gpio
      - delay: 1s
      - switch.turn_off: zRST_gpio
      - logger.log: "Delaying ~10 seconds for cc2652p2 to settle"
      - delay: 11s
      - switch.turn_off: zBSL
      - logger.log: "Please try update with cc2538-bsl tool now"
      - logger.log: "cc-bsl usage: cc2538-bsl.py -p socket://ip-of-gw:6638 -evw firmware.hex"
      
switch:
  - platform: gpio
    pin: 33
    id: zRST_gpio
    inverted: yes
    restore_mode: ALWAYS_OFF
      
  - platform: gpio
    pin: 32
    name: "zBSL"
    id: zBSL
    inverted: yes
    restore_mode: ALWAYS_OFF
    
  - platform: template
    name: "Prep the cc2652p2 for firmware update"
    turn_on_action:
      - script.execute: fw_update_mode
    turn_off_action:
      - button.press: zRST

button:
  - platform: restart
    name: "Restart the Device"

  - platform: template
    name: "Zigbee Module Reset"
    id: zRST
    on_press:
      - switch.turn_on: zRST_gpio
      - delay: 15ms
      - switch.turn_off: zRST_gpio

uart:
  - id: uart_bus
    rx_pin: GPIO17
    tx_pin: GPIO5
    baud_rate: 115200

stream_server:
  - uart_id: uart_bus
    port: 6638 # optional, default is 6638

binary_sensor:
  - platform: stream_server
    connected:
      name: Connected

mdns:
  services:
    - service: "_tubeszb"
      protocol: "_tcp"
      port: 6638
      txt:
        version: 1.0
        name: TubesZB
        radio_type: znp
        baud_rate: 115200
        data_flow_control: software

esp32_ble_tracker:
  scan_parameters:
    interval: 1100ms
    window: 1100ms
    active: true

bluetooth_proxy:
  active: true