zehicle/Vagrantfile

## Vagrantfile
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|

  config.vm.define "admin", primary: true do |admin|

    admin.vm.box = "chef/centos-6.6"

    # Create a forwarded port mapping which allows access to a specific port
    admin.vm.network "forwarded_port", guest: 3000, host: 3030
    admin.vm.network "forwarded_port", guest: 8500, host: 8585

    # Create a private network, which allows host-only access to the machine
    # using a specific IP.
    # admin.vm.network "private_network", ip: "192.168.124.10", auto_config: false

    # Create a public network, which generally matched to bridged network.
    # Bridged networks make the machine appear as another physical device on
    # your network.
    admin.vm.network "public_network"

    # proxy pass through
    if Vagrant.has_plugin?("vagrant-proxyconf") && ENV['http_proxy']
      port = ENV['http_proxy'].split(":")[2]
      config.proxy.http     = "http://10.0.2.2:#{port}"
      config.proxy.https    = "http://10.0.2.2:#{port}"
      config.proxy.no_proxy = "127.0.0.1,[::1],localhost,192.168.124.0/24,192.168.1.0/12,10.0.2.0/24"
    else
      puts "If you have a local proxy cache, install the proxy plug-in! 'vagrant plugin install vagrant-proxyconf'"
    end

    # Share an additional folder to the guest VM.

    # Provider-specific configuration so you can fine-tune various
    # backing providers for Vagrant. These expose provider-specific options.
    # Example for VirtualBox:
    #
    admin.vm.provider "virtualbox" do |vb|
      # Display the VirtualBox GUI when booting the machine
      vb.gui = true
      # Customize the amount of memory on the VM:
      vb.memory = "4096"
    end
    #
    # View the documentation for the provider you are using for more
    # information on available options.

    admin.vm.provision "shell", inline: <<-SHELL
      sed -ie "s/%sudo\tALL=(ALL:ALL) ALL/%sudo ALL=(ALL) NOPASSWD: ALL/g" /etc/sudoers
      ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ""
      sudo -i
      yum install git -y
      chkconfig iptables off
      service iptables stop
      ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ""
      chmod 755 ~/.ssh
      mkdir /opt/opencrowbar
      cd /opt/opencrowbar
      # git clone https://github.com/opencrowbar/core/
      # cd /opt/opencrowbar/core
      #./production.sh admin.opencrowbar.com
    SHELL

    puts "use 'vagrant up slave' to start slave node"

  end

  config.vm.define "slave", autostart:false do |slave|
    slave.vm.box = "chef/centos-7.1"
    slave.vm.provider "virtualbox" do |vb|
      # Customize the amount of memory on the VM:
      vb.memory = "2048"
    end
  end

end


## Vagrantfile-old1
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|

  config.vm.define "admin", primary: true do |admin|

    FileUtils.mkdir_p "~/.cache" unless File.directory? "~/.cache"
    FileUtils.mkdir_p "~/.cache/opencrowbar" unless File.directory? "~/.cache/opencrowbar"
    FileUtils.mkdir_p "~/.cache/opencrowbar/tftpboot" unless File.directory? "~/.cache/opencrowbar/tftpboot"

    admin.vm.box = "chef/centos-6.6"

    # Create a forwarded port mapping which allows access to a specific port
    # within the machine from a port on the host machine. In the example below,
    # accessing "localhost:8080" will access port 80 on the guest machine.
    admin.vm.network "forwarded_port", guest: 3000, host: 3001
    admin.vm.network "forwarded_port", guest: 8500, host: 8501

    # Create a private network, which allows host-only access to the machine
    # using a specific IP.
    admin.vm.network "private_network", ip: "192.168.124.10", auto_config: false

    # Create a public network, which generally matched to bridged network.
    # Bridged networks make the machine appear as another physical device on
    # your network.
    admin.vm.network "public_network"

    # proxy pass through
    if Vagrant.has_plugin?("vagrant-proxyconf") && ENV['http_proxy']
      port = ENV['http_proxy'].split(":")[2]
      config.proxy.http     = "http://10.0.2.2:#{port}"
      config.proxy.https    = "http://10.0.2.2:#{port}"
      config.proxy.no_proxy = "127.0.0.1,[::1],localhost,192.168.124.0/24,192.168.1.0/12,10.0.2.0/24"
    else
      puts "If you have a local proxy cache, install the proxy plug-in! 'vagrant plugin install vagrant-proxyconf'"
    end

    # Share an additional folder to the guest VM.
    admin.vm.synced_folder "~/ocb", "/opt/opencrowbar"
    admin.vm.synced_folder "~/.cache/opencrowbar/tftpboot", "/tftpboot"

    # Provider-specific configuration so you can fine-tune various
    # backing providers for Vagrant. These expose provider-specific options.
    # Example for VirtualBox:
    #
    admin.vm.provider "virtualbox" do |vb|
      # Display the VirtualBox GUI when booting the machine
      vb.gui = true
      # Customize the amount of memory on the VM:
      vb.memory = "4096"
    end
    #
    # View the documentation for the provider you are using for more
    # information on available options.

    admin.vm.provision "shell", inline: <<-SHELL
      sudo sed -ie "s/%sudo\tALL=(ALL:ALL) ALL/%sudo ALL=(ALL) NOPASSWD: ALL/g" /etc/sudoers
      sudo chkconfig iptables off
      sudo service iptables stop
      sudo /opt/opencrowbar/core/production.sh admin.opencrowbar.com
    SHELL

    puts "use 'vagrant up slave' to start slave node"

  end

  config.vm.define "slave", autostart:false do |slave|
    slave.vm.box = "chef/centos-7.1"
    slave.vm.provider "virtualbox" do |vb|
      # Customize the amount of memory on the VM:
      vb.memory = "2048"
    end
  end

end


## Vangrant-old2
# -*- mode: ruby -*-
# vi: set ft=ruby :
# Start an OCB cluster (Admin comes up automatically)
# WE RECOMMEND to install proxy > "vagrant plugin install vagrant-proxyconf"
Vagrant.configure(2) do |config|

  config.vm.define "admin", primary: true do |admin|

    FileUtils.mkdir_p "~/.cache" unless File.directory? "~/.cache"
    FileUtils.mkdir_p "~/.cache/opencrowbar" unless File.directory? "~/.cache/opencrowbar"
    FileUtils.mkdir_p "~/.cache/opencrowbar/tftpboot" unless File.directory? "~/.cache/opencrowbar/tftpboot"

    admin.vm.box = "chef/centos-6.6"

    # Create a forwarded port mapping which allows access to a specific port
    # within the machine from a port on the host machine. In the example below,
    # accessing "localhost:8080" will access port 80 on the guest machine.
    admin.vm.network "forwarded_port", guest: 3000, host: 3001
    admin.vm.network "forwarded_port", guest: 8500, host: 8501

    # Create a private network, which allows host-only access to the machine
    # using a specific IP.
    admin.vm.network "private_network", ip: "192.168.124.10", auto_config: false

    # Create a public network, which generally matched to bridged network.
    # Bridged networks make the machine appear as another physical device on
    # your network.
    admin.vm.network "public_network"

    # proxy pass through
    if Vagrant.has_plugin?("vagrant-proxyconf") && ENV['http_proxy']
      port = ENV['http_proxy'].split(":")[2]
      config.proxy.http     = "http://10.0.2.2:#{port}"
      config.proxy.https    = "http://10.0.2.2:#{port}"
      config.proxy.no_proxy = "127.0.0.1,[::1],localhost,192.168.124.0/24,192.168.1.0/12"
    else
      puts "If you have a local proxy cache, install the proxy plug-in! 'vagrant plugin install vagrant-proxyconf'"
    end

    # Share an additional folder to the guest VM.
    admin.vm.synced_folder "~/ocb/core", "/opt/opencrowbar"
    admin.vm.synced_folder "~/.cache/opencrowbar/tftpboot", "/tftpboot"

    # Provider-specific configuration so you can fine-tune various
    # backing providers for Vagrant. These expose provider-specific options.
    # Example for VirtualBox:
    #
    admin.vm.provider "virtualbox" do |vb|
      # Display the VirtualBox GUI when booting the machine
      vb.gui = true
      # Customize the amount of memory on the VM:
      vb.memory = "4096"
    end
    #
    # View the documentation for the provider you are using for more
    # information on available options.

    admin.vm.provision "shell", inline: <<-SHELL
      sudo sed -ie "s/%sudo\tALL=(ALL:ALL) ALL/%sudo ALL=(ALL) NOPASSWD: ALL/g" /etc/sudoers
      sudo chkconfig iptables off
      sudo service iptables stop
      sudo /opt/opencrowbar/core/production.sh admin.opencrowbar.com
    SHELL

    puts "use 'vagrant up slave' to start slave node"

  end

  config.vm.define "slave", autostart:false do |slave|
    slave.vm.box = "chef/centos-7.1"
    slave.vm.provider "virtualbox" do |vb|
      # Customize the amount of memory on the VM:
      vb.memory = "2048"
    end
  end

end
	# -- mode: ruby --
	# vi: set ft=ruby :
	Vagrant.configure(2) do \|config\|

	config.vm.define "admin", primary: true do \|admin\|

	admin.vm.box = "chef/centos-6.6"

	# Create a forwarded port mapping which allows access to a specific port
	admin.vm.network "forwarded_port", guest: 3000, host: 3030
	admin.vm.network "forwarded_port", guest: 8500, host: 8585

	# Create a private network, which allows host-only access to the machine
	# using a specific IP.
	# admin.vm.network "private_network", ip: "192.168.124.10", auto_config: false

	# Create a public network, which generally matched to bridged network.
	# Bridged networks make the machine appear as another physical device on
	# your network.
	admin.vm.network "public_network"

	# proxy pass through
	if Vagrant.has_plugin?("vagrant-proxyconf") && ENV['http_proxy']
	port = ENV['http_proxy'].split(":")[2]
	config.proxy.http = "http://10.0.2.2:#{port}"
	config.proxy.https = "http://10.0.2.2:#{port}"
	config.proxy.no_proxy = "127.0.0.1,[::1],localhost,192.168.124.0/24,192.168.1.0/12,10.0.2.0/24"
	else
	puts "If you have a local proxy cache, install the proxy plug-in! 'vagrant plugin install vagrant-proxyconf'"
	end

	# Share an additional folder to the guest VM.

	# Provider-specific configuration so you can fine-tune various
	# backing providers for Vagrant. These expose provider-specific options.
	# Example for VirtualBox:
	#
	admin.vm.provider "virtualbox" do \|vb\|
	# Display the VirtualBox GUI when booting the machine
	vb.gui = true
	# Customize the amount of memory on the VM:
	vb.memory = "4096"
	end
	#
	# View the documentation for the provider you are using for more
	# information on available options.

	admin.vm.provision "shell", inline: <<-SHELL
	sed -ie "s/%sudo\tALL=(ALL:ALL) ALL/%sudo ALL=(ALL) NOPASSWD: ALL/g" /etc/sudoers
	ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ""
	sudo -i
	yum install git -y
	chkconfig iptables off
	service iptables stop
	ssh-keygen -t rsa -f ~/.ssh/id_rsa -N ""
	chmod 755 ~/.ssh
	mkdir /opt/opencrowbar
	cd /opt/opencrowbar
	# git clone https://github.com/opencrowbar/core/
	# cd /opt/opencrowbar/core
	#./production.sh admin.opencrowbar.com
	SHELL

	puts "use 'vagrant up slave' to start slave node"

	end

	config.vm.define "slave", autostart:false do \|slave\|
	slave.vm.box = "chef/centos-7.1"
	slave.vm.provider "virtualbox" do \|vb\|
	# Customize the amount of memory on the VM:
	vb.memory = "2048"
	end
	end

	end
	# -- mode: ruby --
	# vi: set ft=ruby :
	# Start an OCB cluster (Admin comes up automatically)
	# WE RECOMMEND to install proxy > "vagrant plugin install vagrant-proxyconf"
	Vagrant.configure(2) do \|config\|

	config.vm.define "admin", primary: true do \|admin\|

	FileUtils.mkdir_p "~/.cache" unless File.directory? "~/.cache"
	FileUtils.mkdir_p "~/.cache/opencrowbar" unless File.directory? "~/.cache/opencrowbar"
	FileUtils.mkdir_p "~/.cache/opencrowbar/tftpboot" unless File.directory? "~/.cache/opencrowbar/tftpboot"

	admin.vm.box = "chef/centos-6.6"

	# Create a forwarded port mapping which allows access to a specific port
	# within the machine from a port on the host machine. In the example below,
	# accessing "localhost:8080" will access port 80 on the guest machine.
	admin.vm.network "forwarded_port", guest: 3000, host: 3001
	admin.vm.network "forwarded_port", guest: 8500, host: 8501

	# Create a private network, which allows host-only access to the machine
	# using a specific IP.
	admin.vm.network "private_network", ip: "192.168.124.10", auto_config: false

	# Create a public network, which generally matched to bridged network.
	# Bridged networks make the machine appear as another physical device on
	# your network.
	admin.vm.network "public_network"

	# proxy pass through
	if Vagrant.has_plugin?("vagrant-proxyconf") && ENV['http_proxy']
	port = ENV['http_proxy'].split(":")[2]
	config.proxy.http = "http://10.0.2.2:#{port}"
	config.proxy.https = "http://10.0.2.2:#{port}"
	config.proxy.no_proxy = "127.0.0.1,[::1],localhost,192.168.124.0/24,192.168.1.0/12"
	else
	puts "If you have a local proxy cache, install the proxy plug-in! 'vagrant plugin install vagrant-proxyconf'"
	end

	# Share an additional folder to the guest VM.
	admin.vm.synced_folder "~/ocb/core", "/opt/opencrowbar"
	admin.vm.synced_folder "~/.cache/opencrowbar/tftpboot", "/tftpboot"

	# Provider-specific configuration so you can fine-tune various
	# backing providers for Vagrant. These expose provider-specific options.
	# Example for VirtualBox:
	#
	admin.vm.provider "virtualbox" do \|vb\|
	# Display the VirtualBox GUI when booting the machine
	vb.gui = true
	# Customize the amount of memory on the VM:
	vb.memory = "4096"
	end
	#
	# View the documentation for the provider you are using for more
	# information on available options.

	admin.vm.provision "shell", inline: <<-SHELL
	sudo sed -ie "s/%sudo\tALL=(ALL:ALL) ALL/%sudo ALL=(ALL) NOPASSWD: ALL/g" /etc/sudoers
	sudo chkconfig iptables off
	sudo service iptables stop
	sudo /opt/opencrowbar/core/production.sh admin.opencrowbar.com
	SHELL

	puts "use 'vagrant up slave' to start slave node"

	end

	config.vm.define "slave", autostart:false do \|slave\|
	slave.vm.box = "chef/centos-7.1"
	slave.vm.provider "virtualbox" do \|vb\|
	# Customize the amount of memory on the VM:
	vb.memory = "2048"
	end
	end

	end