Skip to content

Instantly share code, notes, and snippets.

@zeszyt
Created November 7, 2011 14:05
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save zeszyt/1345095 to your computer and use it in GitHub Desktop.
Save zeszyt/1345095 to your computer and use it in GitHub Desktop.
futrzak dmesg, sysctl
# dmesg
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 234352640 (223MB)
avail mem = 220483584 (210MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/14/08, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. 2.2 @ 0xf0000 (31 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0Q" date 05/14/2008
bios0: FUJITSU SIEMENS FUTRO S400
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc794
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc6f0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 10 11 15
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000! 0xd0000/0x1000 0xef000/0x1000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 10, SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), irq 15, address 00:90:dc:07:3d:c1
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (6033a1aca10172d8.a) swap on wd0b dump on wd0b
# sysctl hw
hw.machine=i386
hw.model=AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:8b2f62e6f9ae5c18,sd0:673638487314ab73,sd1:
hw.diskcount=3
hw.sensors.lm1.volt0=0.00 VDC (VCore)
hw.sensors.lm1.volt1=0.00 VDC (+3.3V)
hw.sensors.lm1.volt2=4.97 VDC (+5V)
hw.sensors.lm1.volt3=0.00 VDC (+12V)
hw.sensors.lm1.volt4=-14.91 VDC (-12V)
hw.sensors.lm1.volt5=-7.71 VDC (-5V)
hw.sensors.lm1.volt6=4.92 VDC (5VSB)
hw.sensors.lm1.volt7=3.25 VDC (VBAT)
hw.cpuspeed=1001
hw.vendor=FUJITSU SIEMENS
hw.product=FUTRO S400
hw.serialno=LSD04345
hw.uuid=22428976-3515-2242-3333-00121288ee8g
hw.physmem=251129856
hw.usermem=251117568
hw.ncpufound=1
hw.allowpowerdown=1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment