gistfile1.txt

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/Applications/MAMP/Library" will be interpreted by the
# server as "/Applications/MAMP/Library/logs/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/Applications/MAMP/Library"

HostnameLookups Off


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile logs/httpd.pid
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80

MAMP_IP_Port_iteration_begin_MAMP
Listen MAMP_IP_Port_MAMP
MAMP_IP_Port_iteration_end_MAMP

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
MAMP_authn_file_module_MAMPLoadModule authn_file_module modules/mod_authn_file.so
MAMP_authn_dbm_module_MAMPLoadModule authn_dbm_module modules/mod_authn_dbm.so
MAMP_authn_anon_module_MAMPLoadModule authn_anon_module modules/mod_authn_anon.so
MAMP_authn_dbd_module_MAMPLoadModule authn_dbd_module modules/mod_authn_dbd.so
MAMP_authn_default_module_MAMPLoadModule authn_default_module modules/mod_authn_default.so
MAMP_authz_host_module_MAMPLoadModule authz_host_module modules/mod_authz_host.so
MAMP_authz_groupfile_module_MAMPLoadModule authz_groupfile_module modules/mod_authz_groupfile.so
MAMP_authz_user_module_MAMPLoadModule authz_user_module modules/mod_authz_user.so
MAMP_authz_dbm_module_MAMPLoadModule authz_dbm_module modules/mod_authz_dbm.so
MAMP_authz_owner_module_MAMPLoadModule authz_owner_module modules/mod_authz_owner.so
MAMP_authz_default_module_MAMPLoadModule authz_default_module modules/mod_authz_default.so
MAMP_auth_basic_module_MAMPLoadModule auth_basic_module modules/mod_auth_basic.so
MAMP_auth_digest_module_MAMPLoadModule auth_digest_module modules/mod_auth_digest.so
MAMP_file_cache_module_MAMPLoadModule file_cache_module modules/mod_file_cache.so
MAMP_cache_module_MAMPLoadModule cache_module modules/mod_cache.so
MAMP_disk_cache_module_MAMPLoadModule disk_cache_module modules/mod_disk_cache.so
MAMP_mem_cache_module_MAMPLoadModule mem_cache_module modules/mod_mem_cache.so
MAMP_dbd_module_MAMPLoadModule dbd_module modules/mod_dbd.so
MAMP_bucketeer_module_MAMPLoadModule bucketeer_module modules/mod_bucketeer.so
MAMP_dumpio_module_MAMPLoadModule dumpio_module modules/mod_dumpio.so
MAMP_echo_module_MAMPLoadModule echo_module modules/mod_echo.so
MAMP_case_filter_module_MAMPLoadModule case_filter_module modules/mod_case_filter.so
MAMP_case_filter_in_module_MAMPLoadModule case_filter_in_module modules/mod_case_filter_in.so
MAMP_reqtimeout_module_MAMPLoadModule reqtimeout_module modules/mod_reqtimeout.so
MAMP_ext_filter_module_MAMPLoadModule ext_filter_module modules/mod_ext_filter.so
MAMP_include_module_MAMPLoadModule include_module modules/mod_include.so
MAMP_filter_module_MAMPLoadModule filter_module modules/mod_filter.so
MAMP_substitute_module_MAMPLoadModule substitute_module modules/mod_substitute.so
MAMP_charset_lite_module_MAMPLoadModule charset_lite_module modules/mod_charset_lite.so
MAMP_deflate_module_MAMPLoadModule deflate_module modules/mod_deflate.so
MAMP_log_config_module_MAMPLoadModule log_config_module modules/mod_log_config.so
MAMP_logio_module_MAMPLoadModule logio_module modules/mod_logio.so
MAMP_env_module_MAMPLoadModule env_module modules/mod_env.so
MAMP_mime_magic_module_MAMPLoadModule mime_magic_module modules/mod_mime_magic.so
MAMP_cern_meta_module_MAMPLoadModule cern_meta_module modules/mod_cern_meta.so
MAMP_expires_module_MAMPLoadModule expires_module modules/mod_expires.so
MAMP_headers_module_MAMPLoadModule headers_module modules/mod_headers.so
MAMP_ident_module_MAMPLoadModule ident_module modules/mod_ident.so
MAMP_usertrack_module_MAMPLoadModule usertrack_module modules/mod_usertrack.so
MAMP_unique_id_module_MAMPLoadModule unique_id_module modules/mod_unique_id.so
MAMP_setenvif_module_MAMPLoadModule setenvif_module modules/mod_setenvif.so
MAMP_version_module_MAMPLoadModule version_module modules/mod_version.so
MAMP_proxy_module_MAMPLoadModule proxy_module modules/mod_proxy.so
MAMP_proxy_connect_module_MAMPLoadModule proxy_connect_module modules/mod_proxy_connect.so
MAMP_proxy_ftp_module_MAMPLoadModule proxy_ftp_module modules/mod_proxy_ftp.so
MAMP_proxy_http_module_MAMPLoadModule proxy_http_module modules/mod_proxy_http.so
MAMP_proxy_scgi_module_MAMPLoadModule proxy_scgi_module modules/mod_proxy_scgi.so
MAMP_proxy_ajp_module_MAMPLoadModule proxy_ajp_module modules/mod_proxy_ajp.so
MAMP_proxy_balancer_module_MAMPLoadModule proxy_balancer_module modules/mod_proxy_balancer.so
MAMP_ssl_module_MAMPLoadModule ssl_module modules/mod_ssl.so
MAMP_mime_module_MAMPLoadModule mime_module modules/mod_mime.so
MAMP_dav_module_MAMPLoadModule dav_module modules/mod_dav.so
MAMP_status_module_MAMPLoadModule status_module modules/mod_status.so
MAMP_autoindex_module_MAMPLoadModule autoindex_module modules/mod_autoindex.so
MAMP_asis_module_MAMPLoadModule asis_module modules/mod_asis.so
MAMP_info_module_MAMPLoadModule info_module modules/mod_info.so
MAMP_cgi_module_MAMPLoadModule cgi_module modules/mod_cgi.so
MAMP_fastcgi_module_MAMPLoadModule fastcgi_module modules/mod_fastcgi.so
MAMP_cgid_module_MAMPLoadModule cgid_module modules/mod_cgid.so
MAMP_dav_fs_module_MAMPLoadModule dav_fs_module modules/mod_dav_fs.so
MAMP_vhost_alias_module_MAMPLoadModule vhost_alias_module modules/mod_vhost_alias.so
MAMP_negotiation_module_MAMPLoadModule negotiation_module modules/mod_negotiation.so
MAMP_dir_module_MAMPLoadModule dir_module modules/mod_dir.so
MAMP_imagemap_module_MAMPLoadModule imagemap_module modules/mod_imagemap.so
MAMP_actions_module_MAMPLoadModule actions_module modules/mod_actions.so
MAMP_speling_module_MAMPLoadModule speling_module modules/mod_speling.so
MAMP_userdir_module_MAMPLoadModule userdir_module modules/mod_userdir.so
MAMP_alias_module_MAMPLoadModule alias_module modules/mod_alias.so
MAMP_rewrite_module_MAMPLoadModule rewrite_module modules/mod_rewrite.so
MAMP_perl_module_MAMPLoadModule perl_module modules/mod_perl.so
MAMP_wsgi_module_MAMPLoadModule wsgi_module modules/mod_wsgi.so
MAMP_xsendfile_module_MAMPLoadModule xsendfile_module modules/mod_xsendfile.so

MAMP_php_module_MAMP
MAMP_php_ini_dir_MAMP

#
AddType application/x-httpd-php .php .phtml

# Security: Disable HTTP TRACE support
TraceEnable off

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User MAMP_User_MAMP
Group MAMP_Group_MAMP

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName MAMP_ServerName_MAMP

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
# MAMP DOCUMENT_ROOT !! Don't remove this line !!
DocumentRoot "MAMP_DocumentRoot_MAMP"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
#    Options Includes
#    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

<IfModule xsendfile_module>
    XSendFile on
</IfModule>

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "MAMP_DocumentRoot_MAMP">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options MAMP_DocumentRoot_Options_MAMP

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

    <IfModule xsendfile_module>
        XSendFilePath "MAMP_DocumentRoot_MAMP"
    </IfModule>
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php

    <IfModule perl_module>
        DirectoryIndex index.pl
    </IfModule>

    <IfModule wsgi_module>
        DirectoryIndex index.wsgi index.py
    </IfModule>

</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride 
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

<Files ~ "^\.DS_Store">
    Order allow,deny
    Deny from all
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "MAMP_ErrorLog_MAMP"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel error

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
#ServerTokens Full
ServerTokens Prod

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory 
# listings, mod_status and mod_info output etc., but not CGI generated 
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "/Applications/MAMP/logs/apache_access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/Applications/MAMP/logs/apache_access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
	#
	# We include the /icons/ alias for FancyIndexed directory listings.  If you
	# do not use FancyIndexing, you may comment this out.
	#
		
	Alias /icons/ "/Applications/MAMP/Library/icons/"
	
	<Directory "/Applications/MAMP/Library/icons">
		Options Indexes MultiViews
		AllowOverride None
		Order allow,deny
		Allow from all
	</Directory>
	
	Alias /phpMyAdmin "/Library/Application Support/appsolute/MAMP PRO/phpMyAdmin"
	Alias /phpmyadmin "/Library/Application Support/appsolute/MAMP PRO/phpMyAdmin"
	
	<Directory "/Library/Application Support/appsolute/MAMP PRO/phpMyAdmin">
		Options Indexes
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from localhost
		Allow from 127.0.0.1
		Allow from ::1
	</Directory>
	
	Alias /phpPgAdmin "/Library/Application Support/appsolute/MAMP PRO/phpPgAdmin"
	Alias /phppgadmin "/Library/Application Support/appsolute/MAMP PRO/phpPgAdmin"
	
	<Directory "/Library/Application Support/appsolute/MAMP PRO/phpPgAdmin">
		Options Indexes
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from localhost
		Allow from 127.0.0.1
		Allow from ::1
	</Directory>
	
	Alias /phpLiteAdmin "/Applications/MAMP/bin/phpLiteAdmin"
	Alias /phpliteadmin "/Applications/MAMP/bin/phpLiteAdmin"
	
	<Directory "/Applications/MAMP/bin/phpLiteAdmin">
		Options Indexes
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from localhost
		Allow from 127.0.0.1
		Allow from ::1
	</Directory>
	
	Alias /SQLiteManager "/Applications/MAMP/bin/SQLiteManager"
	Alias /sqlitemanager "/Applications/MAMP/bin/SQLiteManager"
	
	<Directory "/Applications/MAMP/bin/SQLiteManager">
		Options Indexes
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from localhost
		Allow from 127.0.0.1
		Allow from ::1
	</Directory>
	
	Alias /MAMP "/Library/Application Support/appsolute/MAMP PRO/mamp"
	
	<Directory "/Library/Application Support/appsolute/MAMP PRO/mamp">
		Options Indexes
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from localhost
		Allow from 127.0.0.1
		Allow from ::1
	</Directory>

	Alias /MAMP/favicon.ico "/Applications/MAMP/bin/favicon.ico"

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/Applications/MAMP/cgi-bin/"

    Alias /perl/ "/Applications/MAMP/cgi-bin/"

    <IfModule perl_module>
        PerlModule ModPerl::Registry
        <Location /perl>
            SetHandler perl-script
            PerlResponseHandler ModPerl::Registry
            PerlOptions +ParseHeaders
            Options +ExecCGI
        </Location>
    </IfModule>
</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/Applications/MAMP/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/Applications/MAMP/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /Applications/MAMP/conf/apache/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl
    AddHandler wsgi-script .wsgi .py

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mime_magic_module>
	MIMEMagicFile /Applications/MAMP/conf/apache/magic
</IfModule>

<IfModule ssl_module>
    SSLRandomSeed startup file:/dev/urandom 1024
    SSLRandomSeed connect file:/dev/urandom 1024
    
    #
    # Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
    # SSLProtocol All -SSLv2 -SSLv3
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.  Note that you must also set
# the default access control for these directories, as in the example below.
#
<IfModule mod_userdir>
	UserDir MAMP_UserDir_MAMP
	
	#
	# Control access to UserDir directories.  The following is an example
	# for a site where these directories are restricted to read-only.
	#
	<Directory "MAMP_UserDir_MAMP">
		AllowOverride FileInfo AuthConfig Limit Indexes
		Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
		<Limit GET POST OPTIONS>
			Order allow,deny
			Allow from all
		</Limit>
		<LimitExcept GET POST OPTIONS>
			Order deny,allow
			Deny from all
		</LimitExcept>
	</Directory>
</IfModule>

<IfModule mod_fastcgi.c>
    # URIs that begin with /fcgi-bin/, are found in /var/www/fcgi-bin/
    Alias /fcgi-bin/ "/Applications/MAMP/fcgi-bin/"

    # Anything in here is handled as a "dynamic" server if not defined as "static" or "external"
    <Directory "/Applications/MAMP/fcgi-bin/">
        SetHandler fastcgi-script
        Options +ExecCGI
    </Directory>

    # Anything with one of these extensions is handled as a "dynamic" server if not defined as
    # "static" or "external". Note: "dynamic" servers require ExecCGI to be on in their directory.
    AddHandler fastcgi-script .fcgi .fpl
    
    MAMP_ActionPhpCgi_MAMP
    
    MAMP_FastCgiServer_MAMP
</IfModule>

MAMP_VirtualHosts_begin_MAMP
#
# MAMP virtual hosts
#
MAMP_IP_or_Star_Port_iteration_begin_MAMP
NameVirtualHost MAMP_IP_or_Star_Port_MAMP
MAMP_IP_or_Star_Port_iteration_end_MAMP
MAMP_Port_iteration_begin_MAMP
#<VirtualHost _default_:MAMP_Port_MAMP>
#	DocumentRoot "MAMP_DocumentRoot_MAMP"
#</VirtualHost>
MAMP_Port_iteration_end_MAMP
MAMP_VirtualHost_iteration_begin_MAMP
<VirtualHost MAMP_VirtualHost_IP_MAMP:MAMP_VirtualHost_Port_MAMP>
	ServerName MAMP_VirtualHost_ServerName_MAMP
	MAMP_VirtualHost_ServerAdmin_MAMP
	MAMP_VirtualHost_DirectoryIndex_MAMP
	DocumentRoot "MAMP_VirtualHost_DocumentRoot_MAMP"

    <IfModule xsendfile_module>
        XSendFilePath "MAMP_VirtualHost_DocumentRoot_MAMP"
    </IfModule>

	MAMP_VirtualHost_ServerAliases_MAMP

	<Directory "MAMP_VirtualHost_DocumentRoot_MAMP">
		Options MAMP_VirtualHost_Options_MAMP
		AllowOverride MAMP_VirtualHost_AllowOverride_MAMP
		Order MAMP_VirtualHost_Order_MAMP
        Allow MAMP_VirtualHost_Allow_MAMP
		MAMP_VirtualHost_DirectoryCustom_MAMP
	</Directory>

    MAMP_VirtualHost_WSGIDAEMON_MAMP
    MAMP_VirtualHost_WSGIAPP_MAMP
    MAMP_VirtualHost_ActionPhpCgi_MAMP
	MAMP_VirtualHost_AdditionalCustom_MAMP
</VirtualHost>
MAMP_VirtualHost_iteration_end_MAMP
MAMP_VirtualHosts_end_MAMP

#
# Supplemental configuration
#
# The configuration files in the /Applications/MAMP/conf/apache/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include /Applications/MAMP/conf/apache/extra/httpd-mpm.conf

# Multi-language error messages
#Include /Applications/MAMP/conf/apache/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /Applications/MAMP/conf/apache/extra/httpd-autoindex.conf

# Language settings
#Include /Applications/MAMP/conf/apache/extra/httpd-languages.conf

# Real-time info on requests and configuration
#Include /Applications/MAMP/conf/apache/extra/httpd-info.conf

# Local access to the Apache HTTP Server Manual
#Include /Applications/MAMP/conf/apache/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /Applications/MAMP/conf/apache/extra/httpd-dav.conf

# Various default settings
#Include /Applications/MAMP/conf/apache/extra/httpd-default.conf

# Secure (SSL/TLS) connections
MAMP_SSL_Include_MAMP

# DONT REMOVE: MAMP PRO httpd.conf template compatibility version: 17