Skip to content

Instantly share code, notes, and snippets.

@zshaheen

zshaheen/gist:07e51fa3c1da5a00b0e73a110c02fdf4

Created January 29, 2019 22:35
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save zshaheen/07e51fa3c1da5a00b0e73a110c02fdf4 to your computer and use it in GitHub Desktop.
Save zshaheen/07e51fa3c1da5a00b0e73a110c02fdf4 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
#! /bin/csh -fe
### run_e3sm: your one step script to running E3SMv1
###
### This particular instance of run_e3sm has been configured to reproduce
### the standard resolution water cycle piControl simulation on NERSC
### Edison.
###
### The script will perform the following steps:
### - clone the 'v1.0.0' source code from the E3SM github repository
### - build the executable
### - prepare input files
### - submit 10-day test simulation using 39 nodes to the debug queue
###
### This script was originally created 2015-11-15 by Philip Cameron-Smith
### (pjc@llnl.gov) and Peter Caldwell and incorporates some features
### originally from Hui Wan, Kai Zhang, and Balwinder Singh.
### Significant improvements from Michael Deakin and Chris Golaz.
###
###===================================================================
### THINGS USERS USUALLY CHANGE (SEE END OF SECTION FOR GUIDANCE)
###===================================================================
### BASIC INFO ABOUT RUN
set job_name = DECKv1b_piControl
set compset = A_WCYCL1850S_CMIP6
set resolution = ne30_oECv3_ICG
set machine = edison
set walltime = 00:30
setenv project acme
### SOURCE CODE OPTIONS
# Zeshawn: This gets the code from the git repo.
# Zeshawn: Set this to false when we modify the old_executable parameter.
set fetch_code = true # flag to toggle cloning source code
set e3sm_tag = maint-1.0 # github tag or hash
set tag_name = 20180129 # code sub-directory name
### CASE_NAME
set case_name = ${tag_name}.${job_name}.ne30_oEC.edison
### BUILD OPTIONS
set debug_compile = false
# Zeshawn: If this is true, this means that we already have a build the current output folder.
# Zeshawn: If it's in another dir, we can just give the path to the e3sm.exe.
set old_executable = false # build executable is set to 'false', reuse
# existing one otherwise
### SUBMIT OPTIONS
# Zeshawn: For the first part, we set this to false.
# Zeshawn: After we move the restart files to the run/ dir, we set this to true.
set submit_run = false # submit experiment after successful build
# Zeshawn: We might need to change this when we do the actual running.
set debug_queue = true # submit to debug queue?
### PROCESSOR CONFIGURATION
set processor_config = S # PE count: S (39 nodes), L (285 nodes)
### STARTUP TYPE
set model_start_type = continue
set run_refdir = e3sm_init
# Zeshawn: Chris told me to comment this out.
#set run_refcase = 20171228.beta3rc13_1850.ne30_oECv3_ICG.edison
#set run_refdate = 0331-01-01
### DIRECTORIES
set code_root_dir = ~/E3SM_code
set e3sm_simulations_dir = /global/cscratch1/sd/$USER/E3SM_simulations
set case_build_dir = ${e3sm_simulations_dir}/${case_name}/build
set case_run_dir = ${e3sm_simulations_dir}/${case_name}/run
set short_term_archive_root_dir = ${e3sm_simulations_dir}/${case_name}/archive
### LENGTH OF SIMULATION, RESTARTS, AND ARCHIVING
## 10-day test simulation
set stop_units = ndays
set stop_num = 10
set restart_units = $stop_units
set restart_num = $stop_num
## Multi-year simulation
#set stop_units = nyears
#set stop_num = 10
#set restart_units = nyears
#set restart_num = 1
set num_resubmits = 0
set do_short_term_archiving = false
### SIMULATION OPTIONS
# Zeshawn: Ask Chris, do I change this?
set start_date = 0001-01-01
### COUPLER HISTORY FILES
set do_cpl_hist = true
set cpl_hist_units = nyears
set cpl_hist_num = 1
### AUTOMATIC DELETION OPTIONS
set seconds_before_delete_source_dir = -1
set seconds_before_delete_case_dir = 10
set seconds_before_delete_bld_dir = -1
set seconds_before_delete_run_dir = -1
#==============================
#EXPLANATION FOR OPTIONS ABOVE:
#==============================
### BASIC INFO ABOUT RUN
#job_name: This is only used to name the job in the batch system. The problem is that batch systems often only
# provide the first few letters of the job name when reporting on jobs in the queue, which may not be enough
# to distinguish simultaneous jobs.
#compset: indicates which model components and forcings to use. List choices by typing `create_newcase -list compsets`.
# An (outdated?) list of options is available at http://www.cesm.ucar.edu/models/cesm1.0/cesm/cesm_doc_1_0_4/a3170.html
#resolution: Model resolution to use. Type `create_newcase -list grids` for a list of options or see
# http://www.cesm.ucar.edu/models/cesm1.0/cesm/cesm_doc_1_0_4/a3714.htm. Note that E3SM always uses ne30 or ne120 in the atmosphere.
#machine: what machine you are going to run on. This should be 'default' for most machines, and only changed for machines with multiple queues, such as cori.
# Valid machine names can also be listed via `create_newcase -list machines`
#walltime: How long to reserve the nodes for. The format is HH:MM(:SS); ie 00:10 -> 10 minutes.
# Setting this to 'default' has the script determine a reasonable value for most runs.
#project: what bank to charge for your run time. May not be needed on some machines.
# Setting this to 'default' has CIME determine what project to use
# NOTE: project must be an *environment* variable on some systems.
### SOURCE CODE OPTIONS
#fetch_code: If True, downloads code from github. If False, code is assumed to exist already.
# NOTE: it is assumed that you have access to the E3SM git repository. To get access, see:
# https://acme-climate.atlassian.net/wiki/display/Docs/Installing+the+ACME+Model
#e3sm_tag: E3SM tagname in github. Can be 'master', a git hash, a tag, or a branch name. Only used if fetch_code=True.
# NOTE: If e3sm_tag=master or master_detached, then this script will provide the latest master version, but detach from the head,
# to minimize the risk of a user pushing something to master.
#tag_name: Short name for the E3SM branch used. If fetch_code=True, this is a shorter replacement for e3sm_tag
# (which could be a very long hash!). Otherwise, this is a short name for the branch used. You can
# choose TAG_NAME to be whatever you want.
### BUILD OPTIONS
#debug_compile: If TRUE, then compile with debug flags
# Compiling in debug mode will stop the run at the actual location an error occurs, and provide more helpful output.
# However, it runs about 10 times slower, and is not bit-for-bit the same because some optimizations make tiny change to the
# numerics.
#old_executable: If this is a path to an executable, then it is used instead of recompiling (it is copied across).
# If TRUE then skip the build step entirely.
# If FALSE then build a new executable (using any already compiled files). If you want a clean build then
# set seconds_before_delete_bld_dir>=0.
# NOTE: The executable that will be copied should be the same as would be created by compiling (for provenance).
# NOTE: The path should either be an absolute path, or a path relative to the case_scripts directory.
# NOTE: old_executable=true is a risk to provenance, so this feature may be removed in the future.
# However the build system currently rebuilds a few files every time which takes several minutes.
# When this gets fixed the cost of deleting this feature will be minor.
### SUBMIT OPTIONS
#submit_run: If True, then submit the batch job to start the simulation.
#debug_queue: If True, then use the debug queue, otherwise use the queue specified in the section on QUEUE OPTIONS.
### PROCESSOR CONFIGURATION
#processor_config: Indicates what processor configuration to use.
# 1=single processor, S=small, M=medium, L=large, X1=very large, X2=very very large, CUSTOM=defined below.
# The actual configurations for S,M,L,X1,X2 are dependent on the machine.
### STARTUP TYPE
#model_start_type: Specify how this script should initialize the model: initial, continue, branch.
# These options are not necessarily related to the CESM run_type options.
# 'initial' means the intial files will be copied into the run directory,
# and the E3SM run_type can be 'initial', 'hybrid', or 'restart', as specified by this script below.
# 'continue' will do a standard restart, and assumes the restart files are already in the run directory.
# 'branch' is almost the same, but will set RUN_TYPE='branch', and other options as specified by this script below.
# NOTE: To continue an existing simulation, it may be easier to edit env_run and [case].run manually in the
# case_scripts directory. The biggest difference is that doing it with this script
# may delete the previous case_scripts directory, and will provide a way to pass a simulation to someone else.
### DIRECTORIES
#code_root_dir: The directory that contains (or will contain) the source code and other code files. (formerly $CCSMROOT)
# If fetch_code=false, this is the location where the code already resides.
# If fetch_code=true, this is where to put the code.
### LENGTH OF SIMULATION, RESTARTS, AND ARCHIVING
#stop_units: The units for the length of run, eg nhours, ndays, nmonths, nyears.
#stop_num: The simulation length for each batch submission, in units of $stop_units.
#restart_units: The units for how often restart files are written, eg nhours, ndays, nmonths, nyears.
#restart_num: How often restart files are written, in units of $restart_units.
#num_resubmits: After a batch job finishes successfully, a new batch job will automatically be submitted to
# continue the simulation. num_resubmits is the number of times to submit after initial completion.
# After the first submission, the CONTINUE_RUN flage in env_run.xml will be changed to TRUE.
#do_short_term_archiving: If TRUE, then move simulation output to the archive directory in your scratch directory.
### SIMULATION OPTIONS
#atm_output_freq (the namelist variable is nhtfrq) : The frequency with which the atmosphere writes its output.
# 0=monthly, +N=every N timesteps, -N=every N hours
# For more information: http://www.cesm.ucar.edu/models/atm-cam/docs/usersguide/node45.html
#records_per_atm_output_file (the namelist variable is mfilt): The number of time records in each netCDF output file
# from the atmosphere model. If atm_output_freq=0, then there will only be one time record per file.
#NOTE: If there will be more than one 'history tape' defined in the atm namelist, then
# atm_output_freq and records_per_atm_output_file should be a comma-separated list of numbers
# (specifying the option for each history tape).
#start_date: The day that the simulation starts
### AUTOMATIC DELETION OPTIONS
#seconds_before_delete_source_dir : If seconds_before_delete_source_dir>=0 and fetch_code=true, this script automatically deletes
# the old source code directory after waiting seconds_before_delete_source_dir seconds (to give you the opportunity to cancel
# by pressing ctrl-C). To turn off the deletion (default behavior), set $num_seconds_before_deleting_source_dir to be negative.
#seconds_before_delete_case_dir : Similar to above, but remove the old case_scripts directory. Since create_newcase dies whenever
# the case_scripts directory exists, it only makes sense to use $seconds_before_delete_case_dir<0 if you want to be extra careful and
# only delete the case_scripts directory manually.
#seconds_before_delete_bld_dir : As above, but the old bld directory will be deleted. This makes for a clean start.
#seconds_before_delete_run_dir : As above, but the old run directory will be deleted. This makes for a clean start.
### GENERAL NOTES:
# 1. capitalization doesn't matter on most of the variables above because we lowercase variables before using them.
# 2. most of the code below does things you probably never want to change. However, users will often make settings
# in the "USER_NL" and "RUN CONFIGURATION OPTIONS" sections below.
### PROGRAMMING GUIDELINES
#
# +) The exit error numbers are sequential through the code:
# 0-099 are before create_newcase
# 100-199 are between create_newcase and cesm_setup
# 200-299 are between cesm_setup and case_scripts.build
# 300-399 are between case_scripts.build and case_scripts.submit
# 400-499 are after case_scripts.submit
# If this script dies, then print out the exit code.
# (in csh: use 'echo $status' immediatedly after the script exits)
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# END OF COMMON OPTIONS - you may need to change things below here to access advanced
# capabilities, but if you do you should know what you're doing.
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#===========================================
# VERSION OF THIS SCRIPT
#===========================================
set script_ver = 3.0.20
#===========================================
# DEFINE ALIASES
#===========================================
alias lowercase "echo \!:1 | tr '[A-Z]' '[a-z]'" #make function which lowercases any strings passed to it.
alias uppercase "echo \!:1 | tr '[a-z]' '[A-Z]'" #make function which uppercases any strings passed to it.
alias e3sm_print 'echo run_e3sm: \!*'
alias e3sm_newline "echo ''"
#===========================================
# ALERT THE USER IF THEY TRY TO PASS ARGUMENTS
#===========================================
set first_argument = $1
if ( $first_argument != '' ) then
echo 'This script does everything needed to configure/compile/run a case. As such, it'
echo 'provides complete provenance for each run and makes sharing simulation configurations easy.'
echo 'Users should make sure that everything required for a run is in this script, the E3SM'
echo 'git repo, and/or the inputdata svn repo.'
echo '** This script accepts no arguments. Please edit the script as needed and resubmit without arguments. **'
exit 5
endif
e3sm_newline
e3sm_print '++++++++ run_e3sm starting ('`date`'), version '$script_ver' ++++++++'
e3sm_newline
#===========================================
# DETERMINE THE LOCATION AND NAME OF THE SCRIPT
#===========================================
# NOTE: CIME 5 and git commands are not cwd agnostic, so compute the absolute paths, then cd to the directories as needed
set this_script_name = `basename $0`
set relative_dir = `dirname $0`
set this_script_dir = `cd $relative_dir ; pwd -P`
set this_script_path = $this_script_dir/$this_script_name
#===========================================
# SETUP DEFAULTS
#===========================================
if ( `lowercase $code_root_dir` == default ) then
set code_root_dir = `cd $this_script_dir/..; pwd -P`
endif
if ( `lowercase $tag_name` == default ) then
set pwd_temp = `pwd`
set tag_name = ${pwd_temp:t}
e3sm_print '$tag_name = '$tag_name
endif
#===========================================
# BASIC ERROR CHECKING
#===========================================
set seconds_after_warning = 10
if ( `lowercase $old_executable` == true ) then
if ( $seconds_before_delete_source_dir >= 0 ) then
e3sm_newline
e3sm_print 'ERROR: It is unlikely that you want to delete the source code and then use the existing compiled executable.'
e3sm_print ' Hence, this script will abort to avoid making a mistake.'
e3sm_print ' $seconds_before_delete_source_dir = '$seconds_before_delete_source_dir' $old_executable = '$old_executable
exit 11
endif
if ( $seconds_before_delete_bld_dir >= 0 ) then
e3sm_newline
e3sm_print 'ERROR: It makes no sense to delete the source-compiled code and then use the existing compiled executable.'
e3sm_print ' Hence, this script will abort to avoid making a mistake.'
e3sm_print ' $seconds_before_delete_bld_dir = '$seconds_before_delete_bld_dir' $old_executable = '$old_executable
exit 12
endif
endif
if ( `lowercase $case_build_dir` == default && $seconds_before_delete_bld_dir >= 0 ) then
e3sm_print 'ERROR: run_e3sm cannot delete the build directory when CIME chooses it'
e3sm_print ' To remedy this, either set $case_build_dir to the path of the executables or disable deleting the directory'
exit 14
endif
if ( `lowercase $case_run_dir` == default && $seconds_before_delete_run_dir >= 0 ) then
e3sm_print 'ERROR: run_e3sm cannot delete the run directory when CIME chooses it'
e3sm_print ' To remedy this, either set $case_run_dir to the path of the executables or disable deleting the directory'
exit 15
endif
if ( `lowercase $debug_queue` == true && ( $num_resubmits >= 1 || `lowercase $do_short_term_archiving` == true ) ) then
e3sm_print 'ERROR: Supercomputer centers generally do not allow job chaining in debug queues'
e3sm_print ' You should either use a different queue, or submit a single job without archiving.'
e3sm_print ' $debug_queue = '$debug_queue
e3sm_print ' $num_resubmits = '$num_resubmits
e3sm_print ' $do_short_term_archiving = '$do_short_term_archiving
exit 16
endif
if ( $restart_num != 0 ) then
@ remaining_periods = $stop_num - ( $stop_num / $restart_num ) * $restart_num
if ( $num_resubmits >= 1 && ( $stop_units != $restart_units || $remaining_periods != 0 ) ) then
e3sm_print 'WARNING: run length is not divisible by the restart write frequency, or the units differ.'
e3sm_print 'If restart write frequency doesnt evenly divide the run length, restarts will simulate the same time period multiple times.'
e3sm_print ' $stop_units = '$stop_units
e3sm_print ' $stop_num = '$stop_num
e3sm_print ' $restart_units = '$restart_units
e3sm_print ' $restart_num = '$restart_num
e3sm_print ' $remaining_periods = '$remaining_periods
e3sm_print ' $num_resubmits = '$num_resubmits
sleep $seconds_after_warning
endif
endif
#===========================================
# DOWNLOAD SOURCE CODE IF NEEDED:
#===========================================
### NOTE: you must be setup with access to the E3SM repository before you can clone the repository. For access, see
### https://acme-climate.atlassian.net/wiki/display/Docs/Installing+the+ACME+Model
if ( `lowercase $fetch_code` == true ) then
e3sm_print 'Downloading code from the E3SM git repository.'
if ( -d $code_root_dir/$tag_name ) then
if ( $seconds_before_delete_source_dir >= 0 ) then
set num_seconds_until_delete = $seconds_before_delete_source_dir
e3sm_print 'Removing old code directory '$code_root_dir/$tag_name' in '$num_seconds_until_delete' seconds.'
e3sm_print 'To abort, press ctrl-C'
while ( ${num_seconds_until_delete} > 0 )
e3sm_print ' '${num_seconds_until_delete}' seconds until deletion.'
sleep 1
@ num_seconds_until_delete = ${num_seconds_until_delete} - 1
end
rm -fr $code_root_dir/$tag_name
e3sm_print 'Deleted '$code_root_dir/$tag_name
else
e3sm_print 'ERROR: Your branch tag already exists, so dying instead of overwriting.'
e3sm_print ' You likely want to either set fetch_code=false, change $tag_name, or'
e3sm_print ' change seconds_before_delete_source_dir.'
e3sm_print ' Note: $fetch_code = '$fetch_code
e3sm_print ' $code_root_dir/$tag_name = '$code_root_dir/$tag_name
e3sm_print ' $seconds_before_delete_source_dir = '$seconds_before_delete_source_dir
exit 20
endif #$seconds_before_delete_source_dir >=0
endif #$code_root_dir exists
e3sm_print 'Cloning repository into $tag_name = '$tag_name' under $code_root_dir = '$code_root_dir
mkdir -p $code_root_dir
# This will clone repository, with all code, in directory $tag_name
git clone -b ${e3sm_tag} https://github.com/E3SM-Project/E3SM.git $code_root_dir/$tag_name
# Update sub modules
cd $code_root_dir/$tag_name
git submodule update --init
endif
e3sm_newline
e3sm_print '$case_name = '$case_name
#============================================
# DETERMINE THE SCRATCH DIRECTORY TO USE
#============================================
if ( $e3sm_simulations_dir == default ) then
### NOTE: csh doesn't short-circuit; so we can't check whether $SCRATCH exists or whether it's empty in the same condition
if ( ! $?SCRATCH ) then
e3sm_newline
e3sm_print 'WARNING: Performing science runs while storing run output in your home directory is likely to exceed your quota'
e3sm_print ' To avoid any issues, set $e3sm_simulations_dir to a scratch filesystem'
set e3sm_simulations_dir = ${HOME}/E3SM_simulations
else
### Verify that $SCRATCH is not an empty string
if ( "${SCRATCH}" == "" ) then
set e3sm_simulations_dir = ${HOME}/E3SM_simulations
e3sm_newline
e3sm_print 'WARNING: Performing science runs while storing run output in your home directory is likely to exceed your quota'
e3sm_print ' To avoid any issues, set $e3sm_simulations_dir to a scratch filesystem'
else
set e3sm_simulations_dir = ${SCRATCH}/E3SM_simulations
endif
endif
endif
#============================================
# DELETE PREVIOUS DIRECTORIES (IF REQUESTED)
#============================================
### Determine the case_scripts directory
### Remove existing case_scripts directory (so it doesn't have to be done manually every time)
### Note: This script causes create_newcase to generate a temporary directory (part of a workaround to put the case_name into the script names)
### If something goes wrong, this temporary directory is sometimes left behind, so we need to delete it too.
### Note: To turn off the deletion, set $num_seconds_until_delete to be negative.
### To delete immediately, set $num_seconds_until_delete to be zero.
set case_scripts_dir = ${e3sm_simulations_dir}/${case_name}/case_scripts
if ( -d $case_scripts_dir ) then
if ( ${seconds_before_delete_case_dir} >= 0 ) then
set num_seconds_until_delete = $seconds_before_delete_case_dir
e3sm_newline
e3sm_print 'Removing old $case_scripts_dir directory for '${case_name}' in '${num_seconds_until_delete}' seconds.'
e3sm_print 'To abort, press ctrl-C'
while ( ${num_seconds_until_delete} > 0 )
e3sm_print ' '${num_seconds_until_delete}' seconds until deletion.'
sleep 1
@ num_seconds_until_delete = ${num_seconds_until_delete} - 1
end
rm -fr $case_scripts_dir
e3sm_print ' Deleted $case_scripts_dir directory for : '${case_name}
else
e3sm_print 'WARNING: $case_scripts_dir='$case_scripts_dir' exists '
e3sm_print ' and is not being removed because seconds_before_delete_case_dir<0.'
e3sm_print ' But create_newcase always fails when the case directory exists, so this script will now abort.'
e3sm_print ' To fix this, either delete the case_scripts directory manually, or change seconds_before_delete_case_dir'
exit 35
endif
endif
### Remove existing build directory (to force a clean compile). This is good for a new run, but not usually necessary while developing.
if ( `lowercase $case_build_dir` != default && -d $case_build_dir ) then
if ( ${seconds_before_delete_bld_dir} >= 0 ) then
set num_seconds_until_delete = $seconds_before_delete_bld_dir
e3sm_newline
e3sm_print 'Removing old $case_build_dir directory for '${case_name}' in '${num_seconds_until_delete}' seconds.'
e3sm_print 'To abort, press ctrl-C'
while ( ${num_seconds_until_delete} > 0 )
e3sm_print ' '${num_seconds_until_delete}' seconds until deletion.'
sleep 1
@ num_seconds_until_delete = ${num_seconds_until_delete} - 1
end
rm -fr $case_build_dir
e3sm_print ' Deleted $case_build_dir directory for '${case_name}
else
e3sm_print 'NOTE: $case_build_dir='$case_build_dir' exists '
e3sm_print ' and is not being removed because seconds_before_delete_bld_dir<0.'
endif
endif
### Remove existing run directory (for a clean start). This is good for a new run, but often not usually necessary while developing.
if ( `lowercase $case_run_dir` != default && -d $case_run_dir ) then
if ( ${seconds_before_delete_run_dir} >= 0 ) then
set num_seconds_until_delete = $seconds_before_delete_run_dir
e3sm_newline
e3sm_print 'Removing old $case_run_dir directory for '${case_name}' in '${num_seconds_until_delete}' seconds.'
e3sm_print 'To abort, press ctrl-C'
while ( ${num_seconds_until_delete} > 0 )
e3sm_print ' '${num_seconds_until_delete}' seconds until deletion.'
sleep 1
@ num_seconds_until_delete = ${num_seconds_until_delete} - 1
end
rm -fr $case_run_dir
e3sm_print ' Deleted $case_run_dir directory for '${case_name}
else
e3sm_print 'NOTE: $case_run_dir='$case_run_dir' exists '
e3sm_print ' and is not being removed because seconds_before_delete_run_dir<0.'
endif
endif
#=============================================================
# HANDLE STANDARD PROCESSOR CONFIGURATIONS
#=============================================================
# NOTE: Some standard PE configurations are available (S,M,L,X1,X2).
# If the requested configuration is 1 or CUSTOM, then set to M here, and handle later.
set lower_case = `lowercase $processor_config`
switch ( $lower_case )
case 's':
set std_proc_configuration = 'S'
breaksw
case 'm':
set std_proc_configuration = 'M'
breaksw
case 'l':
set std_proc_configuration = 'L'
breaksw
case 'x1':
set std_proc_configuration = 'X1'
breaksw
case 'x2':
set std_proc_configuration = 'X2'
breaksw
case '1':
set std_proc_configuration = 'M'
breaksw
case 'custom*':
# Note: this is just a placeholder so create_newcase will work.
# The actual configuration should be set under 'CUSTOMIZE PROCESSOR CONFIGURATION'
set std_proc_configuration = 'M'
breaksw
default:
e3sm_print 'ERROR: $processor_config='$processor_config' is not recognized'
exit 40
breaksw
endsw
#================================================================================
# MAKE FILES AND DIRECTORIES CREATED BY THIS SCRIPT READABLE BY EVERYONE IN GROUP
#================================================================================
# Note: we also want to change the group id for the files.
# But this can only be done once the run_root_dir has been created,
# so it is done later.
umask 022
set cime_dir = ${code_root_dir}/${tag_name}/cime
set create_newcase_exe = $cime_dir/scripts/create_newcase
if ( -f ${create_newcase_exe} ) then
set e3sm_exe = e3sm.exe
set case_setup_exe = $case_scripts_dir/case.setup
set case_build_exe = $case_scripts_dir/case.build
set case_run_exe = $case_scripts_dir/.case.run
set case_submit_exe = $case_scripts_dir/case.submit
set xmlchange_exe = $case_scripts_dir/xmlchange
set xmlquery_exe = $case_scripts_dir/xmlquery
set shortterm_archive_script = $case_scripts_dir/case.st_archive
else # No version of create_newcase found
e3sm_print 'ERROR: ${create_newcase_exe} not found'
e3sm_print ' This is most likely because fetch_code should be true.'
e3sm_print ' At the moment, $fetch_code = '$fetch_code
exit 45
endif
#=============================================================
# DETERMINE THE OPTIONS FOR CREATE_NEWCASE
#=============================================================
set configure_options = "--case ${case_name} --compset ${compset} --script-root ${case_scripts_dir} --res ${resolution} --pecount ${std_proc_configuration} --handle-preexisting-dirs u"
if ( `lowercase $machine` != default ) then
set configure_options = "${configure_options} --mach ${machine}"
endif
if ( `lowercase $case_build_dir` == default ) then
set case_build_dir = ${e3sm_simulations_dir}/${case_name}/build
endif
if ( `lowercase $case_run_dir` == default ) then
set case_run_dir = ${e3sm_simulations_dir}/${case_name}/run
endif
mkdir -p ${case_build_dir}
set build_root = `cd ${case_build_dir}/..; pwd -P`
mkdir -p ${case_run_dir}
set run_root = `cd ${case_run_dir}/..; pwd -P`
if ( ${build_root} == ${run_root} ) then
set configure_options = "${configure_options} --output-root ${build_root}"
endif
if ( `lowercase $project` == default ) then
unsetenv project
else
set configure_options = "${configure_options} --project ${project}"
endif
#=============================================================
# CREATE CASE_SCRIPTS DIRECTORY AND POPULATE WITH NEEDED FILES
#=============================================================
e3sm_newline
e3sm_print '-------- Starting create_newcase --------'
e3sm_newline
e3sm_print ${create_newcase_exe} ${configure_options}
${create_newcase_exe} ${configure_options}
cd ${case_scripts_dir}
e3sm_newline
e3sm_print '-------- Finished create_newcase --------'
e3sm_newline
#================================================
# UPDATE VARIABLES WHICH REQUIRE A CASE TO BE SET
#================================================
if ( `lowercase $machine` == default ) then
set machine = `$xmlquery_exe MACH --value`
endif
# machine is a commonly used variable; so make certain it's lowercase
set machine = `lowercase $machine`
if ( `lowercase $case_build_dir` == default ) then
set case_build_dir = ${e3sm_simulations_dir}/${case_name}/bld
endif
${xmlchange_exe} EXEROOT=${case_build_dir}
if ( `lowercase $case_run_dir` == default ) then
set case_run_dir = ${case_scripts_dir}/${case_name}/run
endif
${xmlchange_exe} RUNDIR=${case_run_dir}
if ( ! $?project ) then
setenv project `$xmlquery_exe PROJECT --subgroup case.run --value`
else
if ( $project == "" ) then
setenv project `$xmlquery_exe PROJECT --subgroup case.run --value`
endif
endif
e3sm_print "Project used for submission: ${project}"
#================================
# SET WALLTIME FOR CREATE_NEWCASE
#================================
if ( `lowercase $walltime` == default ) then
if ( `lowercase $debug_queue` == true ) then
set walltime = '0:30:00'
else
if ( $machine == 'cab' || $machine == 'syrah' ) then
set walltime = '1:29:00'
else
set walltime = '2:00:00'
endif
endif
endif
# Allow the user to specify how long the job taks
$xmlchange_exe JOB_WALLCLOCK_TIME=$walltime
#================================
# SET THE STARTDATE FOR THE SIMULATION
#================================
if ( `lowercase $start_date` != 'default' ) then
$xmlchange_exe RUN_STARTDATE=$start_date
endif
#NOTE: Details of the configuration setup by create_newcase are in $case_scripts_dir/env_case.xml, which should NOT be edited.
# It will be used by cesm_setup (formerly 'configure -case').
#NOTE: To get verbose output from create_newcase, add '-v' to the argument list.
#============================================================
#COPY STUFF TO SourceMods IF NEEDED:
#============================================================
#note: SourceMods is a horrible thing to do from a provenance perspective
# it is much better to make changes to the code and to put those changes
# into a git branch, which you then check out to do your run. Nonetheless,
# it is useful for debugging so here's an example of how to use it...
#echo 'KLUDGE: Putting streams.ocean in SourceMods'
#cp /global/u1/p/petercal/junk/streams.ocean $case_scripts_dir/SourceMods/src.mpaso/
#============================================================
# COPY THIS SCRIPT TO THE CASE DIRECTORY TO ENSURE PROVENANCE
#============================================================
set script_provenance_dir = $case_scripts_dir/run_script_provenance
set script_provenance_name = $this_script_name.`date +%F_%T_%Z`
mkdir -p $script_provenance_dir
cp -f $this_script_path $script_provenance_dir/$script_provenance_name
#=============================================
# CUSTOMIZE PROCESSOR CONFIGURATION
# ============================================
#NOTE: Changes to the processor configuration should be done by an expert. \
# Not all possible options will work.
if ( `lowercase $processor_config` == '1' ) then
set ntasks = 1
set nthrds = 1
set sequential_or_concurrent = 'sequential'
foreach ntasks_name ( NTASKS_ATM NTASKS_LND NTASKS_ICE NTASKS_OCN NTASKS_CPL NTASKS_GLC NTASKS_ROF NTASKS_WAV )
$xmlchange_exe --id $ntasks_name --val $ntasks
end
foreach nthrds_name ( NTHRDS_ATM NTHRDS_LND NTHRDS_ICE NTHRDS_OCN NTHRDS_CPL NTHRDS_GLC NTHRDS_ROF NTHRDS_WAV )
$xmlchange_exe --id $nthrds_name --val $nthrds
end
foreach rootpe_name ( ROOTPE_ATM ROOTPE_LND ROOTPE_ICE ROOTPE_OCN ROOTPE_CPL ROOTPE_GLC ROOTPE_ROF ROOTPE_WAV )
$xmlchange_exe --id $rootpe_name --val 0
end
foreach layout_name ( NINST_ATM_LAYOUT NINST_LND_LAYOUT NINST_ICE_LAYOUT NINST_OCN_LAYOUT NINST_GLC_LAYOUT NINST_ROF_LAYOUT NINST_WAV_LAYOUT )
$xmlchange_exe --id $layout_name --val $sequential_or_concurrent
end
else if ( `lowercase $processor_config` == 'customknl' ) then
e3sm_print 'using custom layout for cori-knl because $processor_config = '$processor_config
${xmlchange_exe} MAX_TASKS_PER_NODE="64"
${xmlchange_exe} PES_PER_NODE="256"
${xmlchange_exe} NTASKS_ATM="5400"
${xmlchange_exe} ROOTPE_ATM="0"
${xmlchange_exe} NTASKS_LND="320"
${xmlchange_exe} ROOTPE_LND="5120"
${xmlchange_exe} NTASKS_ICE="5120"
${xmlchange_exe} ROOTPE_ICE="0"
${xmlchange_exe} NTASKS_OCN="3840"
${xmlchange_exe} ROOTPE_OCN="5440"
${xmlchange_exe} NTASKS_CPL="5120"
${xmlchange_exe} ROOTPE_CPL="0"
${xmlchange_exe} NTASKS_GLC="320"
${xmlchange_exe} ROOTPE_GLC="5120"
${xmlchange_exe} NTASKS_ROF="320"
${xmlchange_exe} ROOTPE_ROF="5120"
${xmlchange_exe} NTASKS_WAV="5120"
${xmlchange_exe} ROOTPE_WAV="0"
${xmlchange_exe} NTHRDS_ATM="1"
${xmlchange_exe} NTHRDS_LND="1"
${xmlchange_exe} NTHRDS_ICE="1"
${xmlchange_exe} NTHRDS_OCN="1"
${xmlchange_exe} NTHRDS_CPL="1"
${xmlchange_exe} NTHRDS_GLC="1"
${xmlchange_exe} NTHRDS_ROF="1"
${xmlchange_exe} NTHRDS_WAV="1"
endif
#============================================
# SET PARALLEL I/O (PIO) SETTINGS
#============================================
#Having bad PIO_NUMTASKS and PIO_STRIDE values can wreck performance
#See https://acme-climate.atlassian.net/wiki/display/ATM/How+to+Create+a+New+PE+Layout
#$xmlchange_exe -file env_run.xml -id PIO_NUMTASKS -val 128
#============================================
# SET MODEL INPUT DATA DIRECTORY
#============================================
# NOTE: This section was moved from later in script, because sometimes it is needed for cesm_setup.
# The model input data directory should default to the managed location for your system.
# However, if this does not work properly, or if you want to use your own data, then
# that should be setup here (before case_scripts.build because it checks the necessary files exist)
# NOTE: This code handles the case when the default location is wrong.
# If you want to use your own files then this code will need to be modified.
# NOTE: For information on the E3SM input data repository, see:
# https://acme-climate.atlassian.net/wiki/display/WORKFLOW/ACME+Input+Data+Repository
#set input_data_dir = 'input_data_dir_NOT_SET'
#if ( $machine == 'cori*' || $machine == 'edison' ) then
# set input_data_dir = '/project/projectdirs/m411/ACME_inputdata' # PJC-NERSC
## set input_data_dir = '/project/projectdirs/ccsm1/inputdata' # NERSC
#else if ( $machine == 'titan' || $machine == 'eos' ) then
# set input_data_dir = '/lustre/atlas/proj-shared/cli112/pjcs/ACME_inputdata' # PJC-OLCF
#endif
#if ( -d $input_data_dir ) then
# $xmlchange_exe --id DIN_LOC_ROOT --val $input_data_dir
#else
# echo 'run_e3sm ERROR: User specified input data directory does NOT exist.'
# echo ' $input_data_dir = '$input_data_dir
# exit 270
#endif
### The following command extracts and stores the input_data_dir in case it is needed for user edits to the namelist later.
### NOTE: The following line may be necessary if the $input_data_dir is not set above, and hence defaults to the E3SM default.
#NOTE: the following line can fail for old versions of the code (like v0.3) because
#"-value" is a new option in xmlquery. If that happens, comment out the next line and
#hardcode in the appropriate DIN_LOC_ROOT value for your machine.
set input_data_dir = `$xmlquery_exe DIN_LOC_ROOT --value`
#============================================
# COMPONENT CONFIGURATION OPTIONS
#============================================
#NOTE: This section is for making specific component configuration selections.
#NOTE: The input_data directory is best set in the section for it above.
#NOTE: Setting CAM_CONFIG_OPTS will REPLACE anything set by the build system.
# To add on instead, add '-append' to the xmlchange command.
#NOTE: CAM_NAMELIST_OPTS should NOT be used. Instead, use the user_nl section after case_scripts.build
#$xmlchange_exe --id CAM_CONFIG_OPTS --val "-phys cam5 -chem linoz_mam3"
## Chris Golaz: build with COSP
#NOTE: The xmlchange will fail if CAM is not active, so test whether a data atmosphere (datm) is used.
if ( `$xmlquery_exe --value COMP_ATM` == 'datm' ) then
e3sm_newline
e3sm_print 'The specified configuration uses a data atmosphere, so cannot activate COSP simulator.'
e3sm_newline
else
e3sm_newline
e3sm_print 'Configuring E3SM to use the COSP simulator.'
e3sm_newline
$xmlchange_exe --id CAM_CONFIG_OPTS --append --val='-cosp'
endif
#===========================
# SET THE PARTITION OF NODES
#===========================
if ( `lowercase $debug_queue` == true ) then
if ( $machine == cab || $machine == sierra ) then
$xmlchange_exe --id JOB_QUEUE --val 'pdebug'
else if ($machine != sandiatoss3 && $machine != bebop && $machine != blues) then
$xmlchange_exe --id JOB_QUEUE --val 'debug'
endif
endif
#============================================
# CONFIGURE
#============================================
#note configure -case turned into cesm_setup in cam5.2
e3sm_newline
e3sm_print '-------- Starting case.setup --------'
e3sm_newline
e3sm_print ${case_setup_exe}
${case_setup_exe} --reset
e3sm_newline
e3sm_print '-------- Finished case.setup --------'
e3sm_newline
#============================================================
#MAKE GROUP PERMISSIONS to $PROJECT FOR THIS DIRECTORY
#============================================================
#this stuff, combined with the umask command above, makes
#stuff in $run_root_dir readable by everyone in e3sm group.
set run_root_dir = `cd $case_run_dir/..; pwd -P`
#both run_root_dir and case_scripts_dir are created by create_newcase,
#so run_root_dir group isn't inherited for case_scripts_dir
#========================================================
# CREATE LOGICAL LINKS BETWEEN RUN_ROOT & THIS_SCRIPT_DIR
#========================================================
#NOTE: This is to make it easy for the user to cd to the case directory
#NOTE: Starting the suffix wit 'a' helps to keep this near the script in ls
# (but in practice the behavior depends on the LC_COLLATE system variable).
e3sm_print 'Creating logical links to make navigating easier.'
e3sm_print 'Note: Beware of using ".." with the links, since the behavior of shell commands can vary.'
# Customizations from Chris Golaz
## Link in this_script_dir case_dir
#set run_dir_link = $this_script_dir/$this_script_name=a_run_link
#
#e3sm_print ${run_dir_link}
#
#if ( -l $run_dir_link ) then
# rm -f $run_dir_link
#endif
#e3sm_print "run_root ${run_root_dir}"
#e3sm_print "run_dir ${run_dir_link}"
#
#ln -s $run_root_dir $run_dir_link
#============================================
# SET BUILD OPTIONS
#============================================
if ( `uppercase $debug_compile` != 'TRUE' && `uppercase $debug_compile` != 'FALSE' ) then
e3sm_print 'ERROR: $debug_compile can be true or false but is instead '$debug_compile
exit 220
endif
if ( $machine == 'edison' && `uppercase $debug_compile` == 'TRUE' ) then
e3sm_print 'ERROR: Edison currently has a compiler bug and crashes when compiling in debug mode (Nov 2015)'
exit 222
endif
$xmlchange_exe --id DEBUG --val `uppercase $debug_compile`
#Modify/uncomment the next line to change the number of processors used to compile.
#$xmlchange_exe --id GMAKE_J --val 4
#=============================================
# CREATE NAMELIST MODIFICATION FILES (USER_NL)
#=============================================
# Append desired changes to the default namelists generated by the build process.
#
# NOTE: It doesn't matter which namelist an option is in for any given component, the system will sort it out.
# NOTE: inputdata directory ($input_data_dir) is set above (before cesm_setup).
# NOTE: The user_nl files need to be set before the build, because case_scripts.build checks whether input files exist.
# NOTE: $atm_output_freq and $records_per_atm_output_file are so commonly used, that they are set in the options at the top of this script.
cat <<EOF >> user_nl_cam
nhtfrq = 0,-24,-6,-6,-3,-24
mfilt = 1,30,120,120,240,30
avgflag_pertape = 'A','A','I','A','A','A'
fexcl1 = 'CFAD_SR532_CAL'
fincl1 = 'IEFLX','extinct_sw_inp','extinct_lw_bnd7','extinct_lw_inp','CLD_CAL'
fincl2 = 'FLUT','PRECT','U200','V200','U850','V850','Z500','OMEGA500','UBOT','VBOT','TREFHT','TREFHTMN','TREFHTMX','QREFHT','TS','PS','TMQ','TUQ','TVQ'
fincl3 = 'PSL','T200','T500','U850','V850','UBOT','VBOT','TREFHT'
fincl4 = 'FLUT','U200','U850','PRECT','OMEGA500'
fincl5 = 'PRECT','PRECC'
fincl6 = 'CLDTOT_ISCCP','MEANCLDALB_ISCCP','MEANTAU_ISCCP','MEANPTOP_ISCCP','MEANTB_ISCCP','CLDTOT_CAL','CLDTOT_CAL_LIQ','CLDTOT_CAL_ICE','CLDTOT_CAL_UN','CLDHGH_CAL','CLDHGH_CAL_LIQ','CLDHGH_CAL_ICE','CLDHGH_CAL_UN','CLDMED_CAL','CLDMED_CAL_LIQ','CLDMED_CAL_ICE','CLDMED_CAL_UN','CLDLOW_CAL','CLDLOW_CAL_LIQ','CLDLOW_CAL_ICE','CLDLOW_CAL_UN'
EOF
cat <<EOF >> user_nl_clm
check_finidat_year_consistency = .false.
EOF
### NOTES ON COMMON NAMELIST OPTIONS ###
### ATMOSPHERE NAMELIST ###
#NHTFRQ : The frequency with which the atmosphere writes its output.
# 0=monthly, +N=every N timesteps, -N=every N hours
# For more information: http://www.cesm.ucar.edu/models/atm-cam/docs/usersguide/node45.html
#MFILT : The number of time records in each netCDF output file from the atmosphere model.
# If mfilt is 0, then there will only be one time record per file.
#NOTE: nhtfrq and mfilt can be a comma-separated list of numbers, corresponding to the 'history tapes' defined in the namelist.
#============================================
# BUILD CODE
#============================================
#NOTE: This will either build the code (if needed and $old_executable=false) or copy an existing executable.
if ( `lowercase $old_executable` == false ) then
e3sm_newline
e3sm_print '-------- Starting Build --------'
e3sm_newline
e3sm_print ${case_build_exe}
${case_build_exe}
e3sm_newline
e3sm_print '-------- Finished Build --------'
e3sm_newline
else if ( `lowercase $old_executable` == true ) then
if ( -x $case_build_dir/$e3sm_exe ) then #use executable previously generated for this case_name.
e3sm_print 'Skipping build because $old_executable='$old_executable
e3sm_newline
#create_newcase sets BUILD_COMPLETE to FALSE. By using an old executable you're certifying
#that you're sure the old executable is consistent with the new case... so be sure you're right!
#NOTE: This is a risk to provenance, so this feature may be removed in the future [PJC].
# However the build system currently rebuilds several files every time which takes many minutes.
# When this gets fixed the cost of deleting this feature will be minor.
# (Also see comments for user options at top of this file.)
e3sm_print 'WARNING: Setting BUILD_COMPLETE = TRUE. This is a little risky, but trusting the user.'
$xmlchange_exe --id BUILD_COMPLETE --val TRUE
else
e3sm_print 'ERROR: $old_executable='$old_executable' but no executable exists for this case.'
e3sm_print ' Expected to find executable = '$case_build_dir/$e3sm_exe
exit 297
endif
else
if ( -x $old_executable ) then #if absolute pathname exists and is executable.
#create_newcase sets BUILD_COMPLETE to FALSE. By copying in an old executable you're certifying
#that you're sure the old executable is consistent with the new case... so be sure you're right!
#NOTE: This is a risk to provenance, so this feature may be removed in the future [PJC].
# However the build system currently rebuilds several files every time which takes many minutes.
# When this gets fixed the cost of deleting this feature will be minor.
# (Also see comments for user options at top of this file.)
#
#NOTE: The alternative solution is to set EXEROOT in env_build.xml.
# That is cleaner and quicker, but it means that the executable is outside this directory,
# which weakens provenance if this directory is captured for provenance.
e3sm_print 'WARNING: Setting BUILD_COMPLETE = TRUE. This is a little risky, but trusting the user.'
$xmlchange_exe --id BUILD_COMPLETE --val TRUE
cp -fp $old_executable $case_build_dir/
else
e3sm_print 'ERROR: $old_executable='$old_executable' does not exist or is not an executable file.'
exit 297
endif
endif
#============================================
# BATCH JOB OPTIONS
#============================================
# Set options for batch scripts (see above for queue and batch time, which are handled separately)
# NOTE: This also modifies the short-term archiving script.
# NOTE: We want the batch job log to go into a sub-directory of case_scripts (to avoid it getting clogged up)
# NOTE: we are currently not modifying the archiving scripts to run in debug queue when $debug_queue=true
# under the assumption that if you're debugging you shouldn't be archiving.
# NOTE: there was 1 space between MSUB or PBS and the commands before cime and there are 2 spaces
# in post-cime versions. This is fixed by " \( \)*" in the lines below. The "*" here means
# "match zero or more of the expression before". The expression before is a single whitespace.
# The "\(" and "\)" bit indicate to sed that the whitespace in between is the expression we
# care about. The space before "\(" makes sure there is at least one whitespace after #MSUB.
# Taken all together, this stuff matches lines of the form #MSUB<one or more whitespaces>-<stuff>.
mkdir -p batch_output ### Make directory that stdout and stderr will go into.
set batch_options = ''
if ( $machine =~ 'cori*' || $machine == edison ) then
set batch_options = "--job-name=${job_name} --output=batch_output/${case_name}.o%j"
sed -i /"#SBATCH \( \)*--job-name"/c"#SBATCH --job-name=ST+${job_name}" $shortterm_archive_script
sed -i /"#SBATCH \( \)*--job-name"/a"#SBATCH --account=${project}" $shortterm_archive_script
sed -i /"#SBATCH \( \)*--output"/c'#SBATCH --output=batch_output/ST+'${case_name}'.o%j' $shortterm_archive_script
else if ( $machine == titan || $machine == eos ) then
sed -i /"#PBS \( \)*-N"/c"#PBS -N ${job_name}" ${case_run_exe}
sed -i /"#PBS \( \)*-A"/c"#PBS -A ${project}" ${case_run_exe}
sed -i /"#PBS \( \)*-j oe"/a'#PBS -o batch_output/${PBS_JOBNAME}.o${PBS_JOBID}' ${case_run_exe}
sed -i /"#PBS \( \)*-N"/c"#PBS -N ST+${job_name}" $shortterm_archive_script
sed -i /"#PBS \( \)*-j oe"/a'#PBS -o batch_output/${PBS_JOBNAME}.o${PBS_JOBID}' $shortterm_archive_script
else if ( $machine == anvil ) then
# Priority for Anvil
# For more information, see
# https://acme-climate.atlassian.net/wiki/pages/viewpage.action?pageId=98992379#Anvil:ACME'sdedicatednodeshostedonBlues.-Settingthejobpriority
# If default; use the default priority of qsub.py. Otherwise, should be from 0-5, where 0 is the highest priority
# Note that only one user at a time is allowed to use the highest (0) priority
# env_batch.xml must be modified by hand, as it doesn't conform to the entry-id format
# ${xmlchange_exe} batch_submit="qsub.py "
set anvil_priority = default
if ( `lowercase ${anvil_priority}` != default ) then
sed -i 's:qsub:qsub.py:g' env_batch.xml
set batch_options="-W x=QOS:pri${anvil_priority}"
endif
else
e3sm_print 'WARNING: This script does not have batch directives for $machine='$machine
e3sm_print ' Assuming default E3SM values.'
endif
#============================================
# QUEUE OPTIONS
#============================================
# Edit the default queue and batch job lengths.
# HINT: To change queue after run submitted, the following works on most machines:
# qalter -lwalltime=00:29:00 <run_descriptor>
# qalter -W queue=debug <run_descriptor>
### Only specially authorized people can use the special_e3sm qos on Cori or Edison. Don't uncomment unless you're one.
#if ( `lowercase $debug_queue` == false && $machine == edison ) then
# set batch_options = "${batch_options} --qos=special_e3sm"
#endif
#============================================
# SETUP SHORT TERM ARCHIVING
#============================================
$xmlchange_exe --id DOUT_S --val `uppercase $do_short_term_archiving`
if ( `lowercase $short_term_archive_root_dir` != default ) then
$xmlchange_exe --id DOUT_S_ROOT --val $short_term_archive_root_dir
endif
set short_term_archive_root_dir = `$xmlquery_exe DOUT_S_ROOT --value`
#==============================
# SETUP PERMISSIONS FOR SHARING
#==============================
set group_list = `groups`
if ( "$group_list" =~ "*${project}*" ) then
# Determine what command to use to setup permissions
where setfacl > /dev/null
if ( $? == 0 ) then
# setfacl exists, but may not work depending on kernel configuration
# So, verify it works, and if not, just use chgrp
set group_perms = "setfacl -Rdm g:${project}:r-x"
e3sm_print ${group_perms} ${case_run_dir}
${group_perms} ${case_run_dir}
if ( $? != 0 ) then
set group_perms = "chgrp ${project}"
endif
${group_perms} ${case_run_dir}
# Ensure chgrp works also, in case there's something we didn't anticipate
if ( $? != 0 ) then
unset group_perms
e3sm_print "Could not make results accessible to the group, results must be shared manually"
endif
endif
if ( $?group_perms ) then
# Make results which have been archived accessible to other project members
if (! -d ${short_term_archive_root_dir} )then
mkdir -p ${short_term_archive_root_dir}
endif
e3sm_print ${group_perms} ${short_term_archive_root_dir}
${group_perms} ${short_term_archive_root_dir}
e3sm_print "All project members have been given access to the results of this simulation"
endif
else
e3sm_print "${project} not recognized as a group, results must be shared manually"
endif
#============================================
# COUPLER HISTORY OUTPUT
#============================================
#$xmlchange_exe --id HIST_OPTION --val ndays
#$xmlchange_exe --id HIST_N --val 1
#=======================================================
# SETUP SIMULATION LENGTH AND FREQUENCY OF RESTART FILES
#=======================================================
#SIMULATION LENGTH
$xmlchange_exe --id STOP_OPTION --val `lowercase $stop_units`
$xmlchange_exe --id STOP_N --val $stop_num
#RESTART FREQUENCY
$xmlchange_exe --id REST_OPTION --val `lowercase $restart_units`
$xmlchange_exe --id REST_N --val $restart_num
#COUPLER BUDGETS
$xmlchange_exe --id BUDGETS --val `uppercase $do_cpl_hist`
#COUPLER HISTORY FILES
$xmlchange_exe --id HIST_OPTION --val `lowercase $cpl_hist_units`
$xmlchange_exe --id HIST_N --val $cpl_hist_num
#============================================
# SETUP SIMULATION INITIALIZATION
#============================================
e3sm_newline
e3sm_print '$model_start_type = '${model_start_type}' (This is NOT necessarily related to RUN_TYPE)'
set model_start_type = `lowercase $model_start_type`
#-----------------------------------------------------------------------------------------------
# start_type = initial means start a new run from default or user-specified initial conditions
#-----------------------------------------------------------------------------------------------
if ( $model_start_type == 'initial' ) then
$xmlchange_exe --id RUN_TYPE --val "startup"
$xmlchange_exe --id CONTINUE_RUN --val "FALSE"
#-----------------------------------------------------------------------------------------------
# start_type = continue means you've already run long enough to produce restart files and want to
# continue the run
#-----------------------------------------------------------------------------------------------
else if ( $model_start_type == 'continue' ) then
### This is a standard restart.
$xmlchange_exe --id CONTINUE_RUN --val "TRUE"
#-----------------------------------------------------------------------------------------------
# start_type = hybrid means you want to use restart files from a previous simulation as initial
# conditions
#-----------------------------------------------------------------------------------------------
else if ( $model_start_type == 'hybrid' ) then
$xmlchange_exe --id RUN_TYPE --val "hybrid"
$xmlchange_exe --id RUN_REFCASE --val $run_refcase
$xmlchange_exe --id RUN_REFDATE --val $run_refdate
$xmlchange_exe --id GET_REFCASE --val "TRUE"
$xmlchange_exe --id RUN_REFDIR --val $run_refdir
$xmlchange_exe --id CONTINUE_RUN --val "FALSE"
else
e3sm_print 'ERROR: $model_start_type = '${model_start_type}' is unrecognized. Exiting.'
exit 380
endif
#============================================
# RUN CONFIGURATION OPTIONS
#============================================
#NOTE: This section is for making specific changes to the run options (ie env_run.xml).
#if ( $machine == 'cori*' ) then ### fix pnetcdf problem on Cori. (github #593)
# $xmlchange_exe --id PIO_TYPENAME --val "netcdf"
#endif
#=================================================
# SUBMIT THE SIMULATION TO THE RUN QUEUE
#=================================================
#note: to run the model in the totalview debugger,
# cd $case_run_dir
# totalview srun -a -n <number of procs> -p <name of debug queue> ../bld/$e3sm_exe
# where you may need to change srun to the appropriate submit command for your system, etc.
e3sm_newline
e3sm_print '-------- Starting Submission to Run Queue --------'
e3sm_newline
if ( ${num_resubmits} > 0 ) then
${xmlchange_exe} --id RESUBMIT --val ${num_resubmits}
e3sm_print 'Setting number of resubmits to be '${num_resubmits}
@ total_submits = ${num_resubmits} + 1
e3sm_print 'This job will submit '${total_submits}' times after completion'
endif
if ( `lowercase $submit_run` == 'true' ) then
e3sm_print ' SUBMITTING JOB:'
e3sm_print ${case_submit_exe} --batch-args " ${batch_options} "
${case_submit_exe} --batch-args " ${batch_options} "
else
e3sm_print 'Run NOT submitted because $submit_run = '$submit_run
endif
e3sm_newline
e3sm_print '-------- Finished Submission to Run Queue --------'
e3sm_newline
#=================================================
# DO POST-SUBMISSION THINGS (IF ANY)
#=================================================
# Actions after the run submission go here.
e3sm_newline
e3sm_print '++++++++ run_e3sm Completed ('`date`') ++++++++'
e3sm_newline
#**********************************************************************************
### --- end of script - there are no commands beyond here, just useful comments ---
#**********************************************************************************
### -------- Version information --------
# 1.0.0 2015-11-19 Initial version. Tested on Titan. (PJC)
# 1.0.1 2015-11-19 Fixed bugs and added features for Hopper. (PJC)
# 1.0.2 2015-11-19 Modified to conform with E3SM script standards. PJC)
# 1.0.3 2015-11-23 Modified to include Peter's ideas (PMC)
# 1.0.4 2015-11-23 Additional modification based on discusion with Peter and Chris Golaz. (PJC)
# 1.0.5 2015-11-23 Tweaks for Titan (PJC)
# 1.0.6 2015-11-23 Fixed some error messages, plus some other minor tweaks. (PJC)
# 1.0.7 2015-11-24 Fixed bug for setting batch options (CIME adds an extra space than before). (PJC)
# Also, removed GMAKE_J from option list (left it as a comment for users to find).
# 1.0.8 2015-11-24 Merged old_executable stuff and changed to loop over xmlchange statements for
# single proc run (PMC)
# 1.0.9 2015-11-25 Added support for using pre-cime code versions, fixed some bugs (PMC)
# 1.0.10 2015-11-25 Cosmetic changes to the edited batch script, and improved comments. (PJC)
# 1.0.11 2015-11-25 Fixed bug with naming of st_archive and lt_archive scripts. Also cosmetic improvements (PJC).
# 1.0.12 2015-11-25 changed name of variable orig_dir/dir_of_this_script to "this_script_dir" and removed options
# for old_executable=true and seconds_before_delete_case_dir<0 because they were provenance-unsafe.(PMC)
# 1.0.13 2015-11-25 Merged changes from PMC with cosmetic changes from PJC.
# Also, reactivated old_executable=true, because the model recompiles many files unnecessarily. (PJC)
# 1.0.14 2015-11-25 Added custom PE configuration so the E3SM pre-alpha code will work on Titan for Chris Golaz. (PJC)
# Fixed $cime_space bug introduced in 1.0.10 (PJC)
# 1.0.15 2015-11-25 Fixed bug with old_executable=true (PJC)
# 1.0.16 2015-11-30 Added $machine to the case_name (PJC)
# 1.0.17 2015-11-30 Added date to filename when archiving this script (so previous version doesn't get overwritten) (PJC)
# 1.0.18 2015-11-30 Will now automatically use 'git checkout --detach' so users cannot alter master by accident (PJC)
# 1.0.19 ?? Added an option to set the directory for short term archiving. Also fixed some comments. (PMC)
# 1.0.20 2015-12-10 Improved comments, especially for 'old_executable' option. (PJC)
# 1.0.21 2015-12-10 Modified so that the script names contain "$case_name" rather than "case_scripts".
# Create_newcase doesn't have the flexibility to do what we need, and the rest of the CESM scripts
# are designed to stop us doing what we want, so we had to defeat those protections, but
# we do this in a safe way that reinstates the protections. (PJC)
# 1.0.22 2015-12-11 Creates logical links so it is easy to move between this this_script_dir and run_root_dir. (PJC)
# 1.0.23 2015-12-11 Changed references to build_and_run_script to just run_script, for consistency and brevity. (PJC)
# 1.0.24 2015-12-11 The temp_case_scripts_dir is now handled like case_scripts_dir for checking and deletion. (PJC)
# 1.0.25 2015-12-11 Can have separate name for batch scheduler, to help distinguish runs. (PJC)
# 1.0.26 2015-12-16 Can now handle Cori (NERSC), plus improved error messages. (PJC)
# 1.0.27 2015-12-16 Partial implementation for Eos (OLCF), plus cosmetic changes. (PJC)
# 1.0.28 2015-12-17 Fixed Cori batch options. Improved an error message. (PJC)
# 1.0.29 2015-12-21 Added line to extract inputdata_dir from XML files, so it is available if needed in user_nl files. (PJC)
# 1.0.30 2015-12-23 Changed run.output dir to batch_output -- purpose is clearer, and better for filename completion. (PJC)
# Added option to set PE configuration to sequential or concurrent for option '1'. (PJC)
# 1.0.31 2016-01-07 Moved up the location where the input_data_dir is set, so it is availble to cesm_setup. (PJC)
# Checks case_name is 79 characters, or less, which is a requirement of the E3SM scripts.
# Improved options for SLURM machines.
# Added numbers for the ordering of options at top of file (in preperation for reordering).
# Added xxdiff calls to fix known bugs in master> (need to generalize for other people)
# 1.0.32 2016-01-07 Converted inputdata_dir to input_data_dir for consistency. (PJC)
# Cosmetic improvements.
# 1.0.33 2016-01-08 Changed default tag to master_detached to improve clarity. (PJC)
# Now sets up E3SM git hooks when fetch_code=true.
# 1.0.33p 2016-01-08 Changed compset from A_B1850CN to A_B1850 (pre-e3sm script only). (PJC)
# Added finidat = '' to user_nl_clm, which allows A_B1850 to run.
# 1.0.34 2016-01-12 Commented out the input_data_dir user configuration, so it defaults to the E3SM settings. (PJC)
# 1.0.35 2016-01-13 Improved an error message. (PJC)
# 1.0.36 2016-01-21 Reordered options to better match workflow. (PJC)
# 1.2.0 2016-01-21 Set options to settings for release. (PJC)
# 1.2.1 2016-01-21 Reordered and refined comments to match new ordering of options. (PJC)
# 1.2.2 2016-01-21 The batch submission problem on Cori has been repaired on master (#598),
# so I have undone the workaround in this script. (PJC)
# 1.2.3 2016-01-26 Commented out some of the workarounds for E3SM bugs that are no longer needed. (PJC)
# 1.4.0 2016-03-23 A number of modifications to handle changes in machines and E3SM. [version archived to E3SM] (PJC)
# 1.4.1 2016-03-23 Modified to defaults for Cori (NERSC). (PJC)
# 1.4.2 2016-08-05 Replaced cime_space with pattern matching, added num_depends functionality for daisychained
# jobs, added code for submitting to qos=e3sm_special on Edison, added cpl_hist options, and
# improved support for sierra and cab at LLNL.(PMC)
# 1.4.3 2016-08-10 Improved support for branch runs (PMC)
# 1.4.4 2016-08-11 Added umask command to make run directory world-readable by default.
# 2.0.0 2016-08-10 Added capability to a chain of submissions using the script auto_chain_runs.$machine (PJC)
# 2.0.1 2016-09-13 Fixed num_resubmits undefined error.
# Generalized setting of group permissions for other machines. (PJC)
# 2.0.2 2016-09-13 Turned off short- and long-term archiving so auto_chain_runs script can do it manually. (PJC)
# 2.0.3 2016-09-14 Removed 'git --set-upstream' command, because it does not work on tags. (PJC)
# 2.0.4 2016-09-14 Long term archiving not working in E3SM, so turn it off and warn user. (PJC)
# 3.0.0 2016-12-15 Initial update for CIME5. Change script names, don't move the case directory
# as it's broken by the update, use xmlchange to set up the custom PE Layout.
# Remove support for CIME2 and pre-cime versions. (MD)
# 3.0.1 2017-01-26 Setup to run A_WCYCL1850S simulation at ne30 resolution. (CG)
# 3.0.2 2017-02-13 Activated logical links by default, and tweaked the default settings. (PJC)
# 3.0.3 2017-03-24 Added cori-knl support, made walltime an input variable, changed umask to 022, and
# deleted run_name since it wasn't being used any more.
# 3.0.4 2017-03-31 Added version to E3SM repository. Working on using more defaults from CIME.
# Use 'print' and 'newline' for standardized output (MD)
# 3.0.5 2017-04-07 Restored functionality to delete of run and build directories, and reuse other builds.
# Merged in PMC's changes from 3.0.4. Enabled using CIME defaults for more functionality
# Renamed 'print' and 'newline' to 'e3sm_print' and 'e3sm_newline'
# to disambiguate them from system commands (MD)
# 3.0.6 2017-04-27 Implemented PJC's "hack" in a machine independent way to
# restore the run e3sm groups preferred directory structure
# Add a warning if the default output directory is in the users home
# Give project a default value; if used, CIME will determine the batch account to use
# Remove the warning about not running in interactive mode;
# use the new CIME option --handle-preexisting-dirs to avoid this potential error
# Fix the usage of xmlchange for the customknl configuration
# Set walltime to default to get more time on Edison (MD)
# 3.0.7 2017-05-22 Fix for the new CIME 5.3; use the --script-root option instead of PJC's "hack"
# Note that this breaks compatibility with older versions of CIME
# Also add a fix to reenable using the special e3sm qos queue on Edison (MD)
# 3.0.8 2017-05-24 Fixed minor bug when $machine contained a capital letter. Bug was introduced recently. (PJC)
# 3.0.9 2017-06-19 Fixed branch runs. Also removed sed commands for case.run and use --batch-args in case.submit (MD)
# 3.0.10 2017-06-14 To allow data-atm compsets to work, I added a test for CAM_CONFIG_OPTS. (PJC)
# 3.0.11 2017-07-14 Replace auto-chaining code with E3SM's resubmit feature. Also fix Edison's qos setting (again...) (MD)
# 3.0.12 2017-07-24 Supports setting the queue priority for anvil. Also move making machine lowercase up to clean some things up (MD)
# 3.0.13 2017-08-07 Verify that the number of periods between a restart evenly divides the number until the stop with the same units.
# Update the machine check for cori to account for cori-knl (MD)
# 3.0.14 2017-09-11 Add checks for blues and bebop when trying to use the debug queue. Mostly by Andy Salinger with assist from (MD)
# 3.0.15 2017-09-18 Removes long term archiving settings, as they no longer exist in CIME (MD)
# 3.0.16 2017-10-17 Brings in CGs changes to make branch runs faster and easier. Also adds the machine name to case_name
# 3.0.17 2017-10-31 Trivial bug fix for setting cosp (MD)
# 3.0.18 2017-12-07 Update cime script names which have been hidden (MD)
# 3.0.19 2017-12-07 Remove all references to ACME except for online links. Also updates the case.st_archive name again (MD)
# 3.0.20 2018-04-03 Add in a setfacl command for the run and short term archiving directory (MD)
#
# NOTE: PJC = Philip Cameron-Smith, PMC = Peter Caldwell, CG = Chris Golaz, MD = Michael Deakin
### ---------- Desired features still to be implemented ------------
# +) fetch_code = update (pull in latest updates to branch) (PJC)
# +) A way to run the testsuite.? (PJC)
# +) make the handling of lowercase consistent. $machine may need to be special. (PJC)
# +) generalize xxdiff commands (for fixing known bugs) to work for other people (PJC)
# +) Add a 'default' option, for which REST_OPTION='$STOP_OPTION' and REST_N='$STOP_N'.
# This is important if the user subsequently edits STOP_OPTION or STOP_N. (PJC)
# +) triggering on $e3sm_tag = master_detached doesn't make sense. Fix logic. (PJC)
# +) run_root and run_root_dir are duplicative. Also, move logical link creation before case.setup (PJC)
# +) change comments referring to cesm_setup to case.setup (name has changed). (PJC)
###Example sed commands
#============================
###To delete a line
#sed -i /'fstrat_list'/d $namelists_dir/cam.buildnml.csh
### To replace part of a line
#sed -i s/"#PBS -q regular"/"#PBS -q debug"/ ${case_run_exe}
### To replace a whole line based on a partial match
#sed -i /"#PBS -N"/c"#PBS -N ${run_job_name}" ${case_run_exe}
### To add a new line:
# sed -i /"PBS -j oe"/a"#PBS -o batch_output/${PBS_JOBNAME}.o${PBS_JOBID}" ${case_run_exe}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment