Created
April 14, 2022 19:37
-
-
Save zsoerenm/a5e54abcbfa5b1a8ee6aaa3ddbd127ca to your computer and use it in GitHub Desktop.
DMESG HTC M7
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 44.747741] [CAM] m7_ov2722_vreg_on: CAM_PIN_GPIO_CAM_SEL (0) | |
[ 44.756988] [CAM] ov2722_read_fuseid called | |
[ 44.756988] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 44.757019] [CAM] ov2722_power_up end | |
[ 44.757019] [CAM] msm_sensor_mode_init called | |
[ 44.757019] [CAM] msm_sensor_setting_parallel_ov: update_type=0, res=0 | |
[ 44.757141] [CAM] oem_sensor_init_ov: E | |
[ 44.775848] [CAM] msm_cam_server_subdev_notify: NOTIFY_CID_CHANGE intftype 0 | |
[ 44.802581] [CAM] oem_sensor_init_ov: X | |
[ 44.807861] [CAM] msm_send_open_server qid 0 | |
[ 44.807891] [CAM] msm_enqueue: queue eventdata new max is 1 | |
[ 44.808929] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 44.808929] [CAM] ov2722_read_fuseid called | |
[ 44.808959] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 44.809692] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=0 | |
[ 44.809722] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 44.809722] [CAM] ov2722_read_fuseid called | |
[ 44.809753] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 44.809906] awb_calibration_front_show(3656) | |
[ 44.810058] awb_calibration_front_show(3656) | |
[ 44.810211] awb_calibration_front_show(3656) | |
[ 44.810272] [CAM] msm_sensor_mode_init called | |
[ 44.810272] [CAM] msm_sensor_setting_parallel_ov: update_type=0, res=0 | |
[ 44.810272] [CAM] msm_sensor_setting_parallel_ov: MSM_SENSOR_REG_INIT already inited | |
[ 44.811218] awb_calibration_front_show(3656) | |
[ 44.811401] awb_calibration_front_show(3656) | |
[ 44.811523] awb_calibration_front_show(3656) | |
[ 44.811584] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=0 | |
[ 44.813568] [CAM] msm_enqueue: queue control new max is 1 | |
[ 44.813659] [CAM] msm_open: serv_running[0] = 1 | |
[ 44.828918] awb_calibration_front_show(3656) | |
[ 44.829223] awb_calibration_front_show(3656) | |
[ 44.829498] awb_calibration_front_show(3656) | |
[ 44.854888] [CAM] msm_camera_v4l2_s_parmpath=1,rc=0 | |
[ 44.854949] [CAM] msm_camera_v4l2_s_parmpath=8,rc=0 | |
[ 44.992675] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 44.992675] [CAM] msm_close Closing down instance 00000000, [2, 1] | |
[ 44.992706] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 44.992706] [CAM] msm_close Closing down instance 00000000, [1, 1] | |
[ 44.993347] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 44.993377] [CAM] msm_close Closing down instance 00000000, [0, 1] | |
[ 44.993438] [CAM] msm_send_close_server qid 0 | |
[ 44.998077] [CAM] msm_send_close_server: serv_running[0] = 0 | |
[ 44.998168] [CAM] vpe_reset: VPE already disabled. | |
[ 44.998199] [CAM] vpe_disable, vpe_ctrl->state 0 | |
[ 44.998199] [CAM] vpe_disable: VPE already disabled | |
[ 45.002014] [CAM] msm_csiphy_release MIPI_CSIPHY_GLBL_PWR_CFG_ADDR=0x0 | |
[ 45.002593] [CAM] [CAM]YushanII_release | |
[ 45.003295] [CAM] YushanII_power_down | |
[ 45.004699] [CAM] m7_rawchip_vreg_off | |
[ 45.007202] [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off | |
[ 45.007659] [CAM] m7_csi_vreg_off | |
[ 45.007690] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 45.007690] [CAM] ov2722_power_down | |
[ 45.007690] [CAM] m7_ov2722_vreg_off | |
[ 45.010711] [CAM] m7_ov2722_vreg_off: CAM_PIN_GPIO_CAM_SEL (0) | |
[ 45.014099] [CAM] m7_ov2722_vreg_off: 8921_l8 off | |
[ 45.045593] [CAM] check_yushanII_flag: With yushanII | |
[ 45.046630] [CAM] msm_release_ion_client Calling ion_client_destroy | |
[ 45.102966] [CAM] msm_open use_count 1 | |
[ 45.103027] [CAM] msm_open: pmctl->client(00000000) not null | |
[ 45.103088] [CAM] [CAM_VCM_CB] cam_on_check_vcm() START | |
[ 45.103088] [CAM] [CAM_VCM_CB] cam_on_check_vcm() END | |
[ 45.112030] [CAM] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
[ 45.112060] [CAM] msm_csid_init:204 | |
[ 45.116271] [CAM] msm_camio_probe_on: sinfo sensor name - ov4688 | |
[ 45.116271] [CAM] msm_camio_probe_on: camio_clk m(24000000) v(228570000) | |
[ 45.116302] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 45.116302] [CAM] m7_csi_vreg_on | |
[ 45.116333] 8921_l2: Failed to create debugfs directory | |
[ 45.116363] [CAM] [CAM]YushanII_open_init | |
[ 45.116363] [CAM] m7_rawchip_vreg_on | |
[ 45.116394] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 | |
[ 45.116394] 8921_lvs1: Failed to create debugfs directory | |
[ 45.116851] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0) | |
[ 45.121856] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 | |
[ 45.121887] 8921_s2: Failed to create debugfs directory | |
[ 45.122497] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0) | |
[ 45.128509] [CAM] rawchip external 1v2 gpio_request,177 rc(0) | |
[ 45.128540] [CAM] msm_camio_clk_enable: clk(00000000) obj.name:4-0010 | |
[ 45.132232] [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c | |
[ 45.132293] [CAM] ov4688_power_up called | |
[ 45.132324] [CAM] ov4688_power_down,sdata->htc_image=1 | |
[ 45.132324] [CAM] m7_ov4688_vreg_on | |
[ 45.132324] [CAM] m7_ov4688_vreg_on: 8921_lvs4 1800000 | |
[ 45.132354] 8921_lvs4: Failed to create debugfs directory | |
[ 45.132812] [CAM] m7_ov4688_vreg_on: 8921_lvs4 1800000 (0) | |
[ 45.137847] 8921_l8: Failed to create debugfs directory | |
[ 45.147705] 8921_l9: Failed to create debugfs directory | |
[ 45.149291] [CAM] msm_sensor_set_power_up: called 1920 | |
[ 45.161407] [CAM] ov4688_sensor_open_init: ov4688_s_ctrl.mirror_flip=2 | |
[ 45.161407] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 45.161437] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 45.161437] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 45.161437] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 45.161437] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 45.161468] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 45.161468] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 45.161468] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 45.161468] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 45.161499] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 45.161499] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 45.161499] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 45.161499] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 45.161529] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 45.161529] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 45.161529] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 45.161529] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 45.161560] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 45.161560] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 45.161560] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 45.161560] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 45.161590] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 45.161590] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 45.161590] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 45.161590] [CAM] msm_sensor_mode_init called | |
[ 45.161621] [CAM] msm_sensor_setting_parallel: update_type=0, res=0 | |
[ 45.162597] [CAM] ti201_i2c_add_driver_table called | |
[ 45.162597] [CAM] oem_sensor_init: E | |
[ 45.162628] [CAM] ti201_poweron_af enable AF actuator, gpio = 152 | |
[ 45.165130] [CAM] [OIS] HtcActOisBinder_open_init start | |
[ 45.165161] [CAM] [OIS] HtcActOisBinder_open_init FW_Version=0x7 | |
[ 45.273193] [CAM] msm_cam_server_subdev_notify: NOTIFY_CID_CHANGE intftype 0 | |
[ 45.398345] [CAM] oem_sensor_init: X | |
[ 45.403228] [CAM] [OIS] HtcActOisBinder_open_init g_otp_size=34 | |
[ 45.405364] [CAM] [OIS] Gyro Gain X0 : 0xbe | |
[ 45.405364] [CAM] [OIS] Corrected Gyro Gain X0 : 0xbe | |
[ 45.435729] [CAM] [OIS] HtcActOisBinder_open_init g_ois_mode=2 | |
[ 45.439361] [CAM] [OIS] HtcActOisBinder_open_init end | |
[ 45.474212] init: starting service 'vendor.sensors-hal-1-0'... | |
[ 45.490264] [CAM] msm_send_open_server qid 0 | |
[ 45.490264] [CAM] msm_enqueue: queue eventdata new max is 1 | |
[ 45.492706] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 45.492706] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 45.492706] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 45.492736] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 45.492736] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 45.492736] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 45.492736] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 45.492767] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 45.492767] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 45.492767] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 45.492767] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 45.492797] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 45.492797] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 45.492797] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 45.492797] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 45.492828] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 45.492828] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 45.492828] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 45.492828] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 45.492858] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 45.492858] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 45.492858] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 45.492858] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 45.492889] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 45.492889] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 45.493225] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=1 | |
[ 45.493255] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 45.493255] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 45.493255] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 45.493255] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 45.493286] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 45.493286] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 45.493286] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 45.493286] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 45.493316] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 45.493316] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 45.493316] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 45.493316] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 45.493347] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 45.493347] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 45.493347] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 45.493347] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 45.493377] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 45.493377] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 45.493377] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 45.493377] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 45.493408] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 45.493408] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 45.493408] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 45.493408] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 45.493438] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 45.493560] awb_calibration_show(3656) | |
[ 45.493865] awb_calibration_show(3656) | |
[ 45.493988] awb_calibration_show(3656) | |
[ 45.494079] [CAM] msm_sensor_mode_init called | |
[ 45.494079] [CAM] msm_sensor_setting_parallel: update_type=0, res=0 | |
[ 45.494079] [CAM] msm_sensor_setting_parallel: MSM_SENSOR_REG_INIT already inited | |
[ 45.495056] awb_calibration_show(3656) | |
[ 45.495208] awb_calibration_show(3656) | |
[ 45.495330] awb_calibration_show(3656) | |
[ 45.495391] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=1 | |
[ 45.499969] [CAM] msm_enqueue: queue control new max is 1 | |
[ 45.499999] [CAM] msm_open: serv_running[0] = 1 | |
[ 45.510589] [CAM] [FLT] msm_camera_flash state 3 | |
[ 45.510620] [CAM] m7_flashlight_control, linear led, mode=0 | |
[ 45.510620] [FLT]TPS flashlight_turn_off | |
[ 45.510803] [FLT]TPS tps61310_flashlight_control: mode: 0 | |
[ 45.510833] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 45.510833] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 45.510833] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 45.510833] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 45.510864] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 45.510864] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 45.510864] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 45.510864] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 45.510894] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 45.510894] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 45.510894] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 45.510925] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 45.510925] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 45.510925] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 45.510925] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 45.510955] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 45.510955] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 45.510955] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 45.510955] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 45.510986] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 45.510986] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 45.510986] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 45.510986] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 45.511016] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 45.511016] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 45.511047] [CAM] OTP_data[2] 0 OTP_data[3] 235 OTP_data[4] 1 OTP_data[5] 148 | |
[ 45.511047] [CAM] VCM_Start = 0 | |
[ 45.511047] [CAM] VCM_Infinity = 175 | |
[ 45.511047] [CAM] VCM_Macro = 404 | |
[ 45.511047] [CAM] VCM Module vendor = = 0 | |
[ 45.517425] awb_calibration_show(3656) | |
[ 45.517761] awb_calibration_show(3656) | |
[ 45.518035] awb_calibration_show(3656) | |
[ 45.534149] [CAM] [OIS] ti201_act_set_ois_mode ois_mode:2 | |
[ 45.534179] [CAM] [OIS] HtcActOisBinder_act_set_ois_mode ois_mode=2 | |
[ 45.543701] [CAM] msm_camera_v4l2_s_parmpath=1,rc=0 | |
[ 45.543792] [CAM] msm_camera_v4l2_s_parmpath=8,rc=0 | |
[ 45.572326] [CAM] [OIS] ti201_act_set_ois_mode ois_mode:0 | |
[ 45.572326] [CAM] [OIS] HtcActOisBinder_act_set_ois_mode ois_mode=0 | |
[ 45.684661] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 45.684661] [CAM] msm_close Closing down instance 00000000, [2, 1] | |
[ 45.684997] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 45.685028] [CAM] msm_close Closing down instance 00000000, [1, 1] | |
[ 45.685668] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 45.685668] [CAM] msm_close Closing down instance 00000000, [0, 1] | |
[ 45.685760] [CAM] msm_send_close_server qid 0 | |
[ 45.689514] [CAM] [FLT] msm_camera_flash state 4 | |
[ 45.689544] [CAM] m7_flashlight_control, linear led, mode=0 | |
[ 45.689544] [FLT]TPS flashlight_turn_off | |
[ 45.689697] [FLT]TPS tps61310_flashlight_control: mode: 0 | |
[ 45.690582] [CAM] msm_send_close_server: serv_running[0] = 0 | |
[ 45.690673] [CAM] vpe_reset: VPE already disabled. | |
[ 45.690673] [CAM] vpe_disable, vpe_ctrl->state 0 | |
[ 45.690673] [CAM] vpe_disable: VPE already disabled | |
[ 45.694488] [CAM] msm_csiphy_release MIPI_CSIPHY_GLBL_PWR_CFG_ADDR=0x0 | |
[ 45.695007] [CAM] [OIS] HtcActOisBinder_open_init start | |
[ 45.695037] [CAM] [OIS] HtcActOisBinder_open_init FW_Version=0x7 | |
[ 45.875366] [CAM] [OIS] HtcActOisBinder_open_init g_otp_size=34 | |
[ 45.877502] [CAM] [OIS] Gyro Gain X0 : 0xbe | |
[ 45.877532] [CAM] [OIS] Corrected Gyro Gain X0 : 0xbe | |
[ 45.906738] [CAM] [OIS] HtcActOisBinder_open_init g_ois_mode=0 | |
[ 45.906738] [CAM] [OIS] HtcActOisBinder_open_init end | |
[ 45.906768] [CAM] ti201_poweroff_af disable AF actuator, gpio = 152 | |
[ 45.942565] [CAM] [CAM]YushanII_release | |
[ 45.943298] [CAM] YushanII_power_down | |
[ 45.944335] [CAM] m7_rawchip_vreg_off | |
[ 45.946838] [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off | |
[ 45.947265] [CAM] m7_csi_vreg_off | |
[ 45.947296] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 45.947326] [CAM] ov4688_power_down called | |
[ 45.947326] [CAM] msm_sensor_set_power_down: called 1956 | |
[ 45.949371] [CAM] m7_ov4688_vreg_off | |
[ 46.000793] [CAM] msm_release_ion_client Calling ion_client_destroy | |
[ 46.092987] init: Service 'vendor.sensors-hal-1-0' (pid 652) exited with status 0 | |
[ 46.093048] init: Sending signal 9 to service 'vendor.sensors-hal-1-0' (pid 652) process group... | |
[ 46.093353] libprocessgroup: Successfully killed process cgroup uid 1000 pid 652 in 0ms | |
[ 46.770996] acc_open | |
[ 46.771026] acc_release | |
[ 47.351013] [WLAN] dhd_open fw_path=/vendor/etc/firmware/fw_bcm4335_b0.bin | |
[ 47.351013] [WLAN] | |
[ 47.351013] Dongle Host Driver, version 1.88.45 (r420671) | |
[ 47.351043] Compiled in drivers/net/wireless/bcmdhd on Apr 13 2022 at 17:46:39 | |
[ 47.351043] [WLAN] wl_android_wifi_on in | |
[ 47.351043] [WLAN] wifi_set_power = 1 | |
[ 47.351043] [WLAN] wifi_set_power = 1 | |
[ 47.351074] WiFi: trying to acquire BT lock | |
[ 47.351074] ####btlock acquired cookie: WiFi | |
[ 47.351074] ** WiFi: btlock acquired** | |
[ 47.351074] m7_wifi_power: 1 | |
[ 47.352111] htc_BCM4335_wl_reg_ctl ON=1, ID=0 | |
[ 47.352142] EN BCM4335 WL REG | |
[ 47.352142] htc_BCM4335_wl_reg_ctl ON=1, ID=0 DONE | |
[ 47.474395] ####btlock released, cookie: WiFi | |
[ 47.474426] [WLAN] =========== WLAN going back to live ======== | |
[ 47.492858] [LED]pm8xxx_led_set +++ | |
[ 47.492889] [LED]pm8xxx_led_set --- | |
[ 47.492950] [LED]pm8xxx_led_current_set, bank:6, brightness:255 +++ | |
[ 47.493133] [LED]pm8xxx_led_current_set, bank:6, brightness:255 --- | |
[ 47.546234] [WLAN] load firmware from /vendor/etc/firmware/fw_bcm4335_b0.bin, nvram /vendor/etc/calibration_EMEA | |
[ 47.546325] [WLAN] chip is 4335 B0! | |
[ 47.546356] [WLAN] firmware path = /vendor/etc/firmware/fw_bcm4335_b0.bin | |
[ 47.547088] [WLAN] _dhdsdio_download_firmware bus->fw_path[/vendor/etc/firmware/fw_bcm4335_b0.bin] | |
[ 47.547088] [WLAN] dhdsdio_download_code_file: download firmware /vendor/etc/firmware/fw_bcm4335_b0.bin | |
[ 47.669036] [WLAN] dhdsdio_download_nvram bus->nv_path[/vendor/etc/calibration_EMEA] | |
[ 47.669036] [WLAN] dhdsdio_download_nvram: nvram_path=/vendor/etc/calibration_EMEA | |
[ 47.670471] [WLAN] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. | |
[ 47.789031] [WLAN] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) | |
[ 47.789825] SDIOD_CCCR_INTEN is 0x6 | |
[ 47.793823] [WLAN] set ampdu tx lowat to 5 | |
[ 47.794769] [WLAN] dhd_wl_ioctl: WLC_SET_VAR: ampdu_tx_lowat, ret = -23 | |
[ 47.794769] [WLAN] dhd_preinit_ioctls set ampdu tx lowat ret= -23 | |
[ 47.815582] [WLAN] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver | |
[ 47.839233] [WLAN] dhd_pktfilter_offload_set: successfully added pktfilter 100 0 0 0 0x01 0x00 | |
[ 47.840087] [WLAN] dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23 | |
[ 47.880035] [WLAN] dhd_rx_frame: net device is NOT registered yet. drop packet | |
[ 47.880859] [WLAN] dhd_txglom_enable: called, enable=1 | |
[ 47.881469] [WLAN] dhd_pno_init enter | |
[ 47.884429] [WLAN] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=ea:99:c4:83:44:7b | |
[ 47.917297] [WLAN] enter dhd_set_multicast_list | |
[ 47.917327] [WLAN] enter dhd_set_multicast_list | |
[ 47.920806] [WLAN] enter dhd_set_multicast_list | |
[ 47.921264] [WLAN] enter dhd_set_multicast_list | |
[ 48.048950] init: starting service 'wpa_supplicant'... | |
[ 48.050659] init: Created socket '/dev/socket/wpa_wlan0', mode 660, user 1010, group 1010 | |
[ 48.073730] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.073883] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.074005] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.075225] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.105682] init: Control message: Processed ctl.interface_start for 'android.hardware.wifi.supplicant@1.0::ISupplicant/default' from pid: 220 (/system/bin/hwservicemanager) | |
[ 48.446685] msm_vidc_dec: Inside vid_dec_open() | |
[ 48.446716] | |
[ 48.446716] res_trk_download_firmware(): Request firmware download | |
[ 48.454711] ueventd: firmware: loading 'vidc_1080p.fw' for '/devices/platform/msm_vidc.0/firmware/vidc_1080p.fw' | |
[ 48.469879] ueventd: loading /devices/platform/msm_vidc.0/firmware/vidc_1080p.fw took 17ms | |
[ 48.470977] | |
[ 48.471008] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 48.495178] | |
[ 48.495178] <ERROR>: fw_version 7:25:2014 | |
[ 48.519653] msm_vidc_dec: Inside vid_dec_release() | |
[ 48.537261] msm_vidc_dec: Return from vid_dec_release() | |
[ 48.851715] [LED]pm8xxx_led_set +++ | |
[ 48.851745] [LED]pm8xxx_led_set --- | |
[ 48.851776] [LED]pm8xxx_led_set +++ | |
[ 48.851776] [LED]pm8xxx_led_set --- | |
[ 48.851806] [LED]pm8xxx_led_blink_store: bank 4 blink 0 sync 0 | |
[ 48.851837] [LED]pm8xxx_led_blink_store: bank 5 blink 0 sync 0 | |
[ 48.851867] [LED]pm8xxx_led_current_set, bank:4, brightness:0 +++ | |
[ 48.851928] [LED]pm8xxx_led_current_set, bank:4, brightness:0 --- | |
[ 48.851928] [LED]pm8xxx_led_current_set, bank:5, brightness:0 +++ | |
[ 48.851959] [LED]pm8xxx_led_current_set, bank:5, brightness:0 --- | |
[ 48.851989] [LED]led_blink_work_func +++ | |
[ 48.851989] [LED]pm8xxx_led_blink: bank 4 blink 0 sync 0 | |
[ 48.852050] [LED]led_blink_work_func --- | |
[ 48.852050] [LED]led_blink_work_func +++ | |
[ 48.852050] [LED]pm8xxx_led_blink: bank 5 blink 0 sync 0 | |
[ 48.852111] [LED]led_blink_work_func --- | |
[ 48.917175] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.918914] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.919036] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.920288] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.962371] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.962585] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.962707] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 48.963562] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 50.121795] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 50.121978] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 50.122070] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 50.123291] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 50.477355] init: starting service 'vendor.sensors-hal-1-0'... | |
[ 50.574554] init: Service 'vendor.sensors-hal-1-0' (pid 1001) exited with status 0 | |
[ 50.574615] init: Sending signal 9 to service 'vendor.sensors-hal-1-0' (pid 1001) process group... | |
[ 50.574981] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1001 in 0ms | |
[ 50.585296] [BT]== R OFF == | |
[ 50.585449] ####btlock acquired cookie: BT35 | |
[ 50.585601] [BT]== R ON == | |
[ 50.598907] [BT]== S UP == | |
[ 50.599365] [BT]-- HOST BT_WAKE=LOW, 3 -- | |
[ 50.599731] [BT]-- HOST BT_WAKE=LOW, 3 -- | |
[ 50.600036] [BT]-- CHIP HOST_WAKE=LOW, 3 -- | |
[ 50.609954] [BT]-- CHIP HOST_WAKE=HIGH, 3 -- | |
[ 50.668914] [BT]-- CHIP HOST_WAKE=LOW, 3 -- | |
[ 51.182098] [GYRO][R3GD20] r3gd20: attr_polling_rate_store: gyro->input_poll_dev->poll_interval = 20 | |
[ 51.182617] [GYRO][R3GD20] r3gd20_enable: enabled = 0 | |
[ 51.183868] [GYRO][R3GD20] dev_data->pdata->gpio_int2 = 0 | |
[ 51.183898] [GYRO][R3GD20] Manually queue work!! HW_WAKE_UP_TIME = 160 | |
[ 51.184112] [GYRO][R3GD20] attr_cali_data_show: Calibration data (x, y, z) = (0, 6, -3) | |
[ 51.184234] [GSNR][BMA250_BOSCH] bma250_enable_store: data = 1 | |
[ 51.184234] [GSNR][BMA250_BOSCH] bma250_set_enable: enable = 1 | |
[ 51.184234] [GSNR][BMA250_BOSCH] bma250_set_mode++: mode = 0, bma250->ref_count = 0 | |
[ 51.184265] [GSNR][BMA250_BOSCH] bma250_set_mode: Set to High Power mode!! | |
[ 51.185180] [GSNR][BMA250_BOSCH] bma250_set_mode--33: mode = 0, bma250->ref_count = 1 | |
[ 51.185485] [COMP][AKM8963_NST] AKECS_GetOpenStatus | |
[ 51.208801] [GYRO][R3GD20] r3gd20_device_power_off: | |
[ 51.208984] [GYRO][R3GD20] r3gd20_disable: polling disabled | |
[ 51.212738] [GSNR][BMA250_BOSCH] bma250_enable_store: data = 0 | |
[ 51.212738] [GSNR][BMA250_BOSCH] bma250_set_enable: enable = 0 | |
[ 51.212738] [GSNR][BMA250_BOSCH] bma250_set_mode++: mode = 2, bma250->ref_count = 1 | |
[ 51.212921] [GSNR][BMA250_BOSCH] bma250_set_mode: Set to Low Power mode!! | |
[ 51.213500] [GSNR][BMA250_BOSCH] bma250_set_mode--33: mode = 2, bma250->ref_count = 0 | |
[ 51.254394] [COMP][AKM8963_NST] AKECS_GetCloseStatus++ | |
[ 51.254394] [COMP][AKM8963_NST] AKECS_GetCloseStatus | |
[ 51.485137] ####btlock released, cookie: BT35 | |
[ 51.750976] [WLAN] enter dhd_set_multicast_list | |
[ 51.751007] [WLAN] enter dhd_set_multicast_list | |
[ 51.775543] [WLAN] dhd_enable_packet_filter: enter, value = 0, multicast_lock = 1, is_screen_off= 0 | |
[ 51.776458] [WLAN] dhd_pktfilter_offload_enable: successfully disable pktfilter 100 0 0 0 0x01 0x00 | |
[ 51.777252] [COMP][AKM8963_NST] AKECS_GetOpenStatus++ | |
[ 51.779754] [WLAN] dhd_enable_packet_filter: enter, value = 0, multicast_lock = 1, is_screen_off= 0 | |
[ 51.780609] [WLAN] dhd_pktfilter_offload_enable: successfully disable pktfilter 100 0 0 0 0x01 0x00 | |
[ 51.782592] [WLAN] wl_android_set_screen_off 0 | |
[ 51.790527] [WLAN] wl_cfg80211_dhd_chk_link wl_get_drv_status(wl, CONNECTED, dev) = 0 | |
[ 51.790527] [WLAN] update pm: PM_FAST, wifiLock: 1 | |
[ 51.792114] [WLAN] update dtim listern interval: 0 | |
[ 51.792755] [WLAN] dhd_enable_packet_filter: enter, value = 0, multicast_lock = 1, is_screen_off= 0 | |
[ 51.793395] [WLAN] dhd_pktfilter_offload_enable: successfully disable pktfilter 100 0 0 0 0x01 0x00 | |
[ 52.693878] [BT]-- CHIP HOST_WAKE=HIGH, 3 -- | |
[ 53.573730] | |
[ 53.573730] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 53.583374] ueventd: firmware: loading 'vidc.mdt' for '/devices/platform/pil_vidc/firmware/vidc.mdt' | |
[ 53.584777] ueventd: loading /devices/platform/pil_vidc/firmware/vidc.mdt took 1ms | |
[ 53.630706] ueventd: firmware: loading 'vidc.b02' for '/devices/platform/pil_vidc/firmware/vidc.b02' | |
[ 53.641235] ueventd: loading /devices/platform/pil_vidc/firmware/vidc.b02 took 10ms | |
[ 53.647766] ueventd: firmware: loading 'vidc.b03' for '/devices/platform/pil_vidc/firmware/vidc.b03' | |
[ 53.649200] ueventd: loading /devices/platform/pil_vidc/firmware/vidc.b03 took 1ms | |
[ 53.679168] pil_vidc pil_vidc: vidc: Brought out of reset | |
[ 53.692871] | |
[ 53.692871] <ERROR>: fw_version 7:25:2014 | |
[ 53.693054] Securing... | |
[ 53.695983] init: Sending signal 9 to service 'idmap2d' (pid 387) process group... | |
[ 53.701751] libprocessgroup: Successfully killed process cgroup uid 1000 pid 387 in 5ms | |
[ 53.763397] init: Control message: Processed ctl.stop for 'idmap2d' from pid: 506 (system_server) | |
[ 53.763824] init: Service 'idmap2d' (pid 387) received signal 9 | |
[ 54.155975] [CAM] msm_open use_count 1 | |
[ 54.156066] [CAM] msm_open: pmctl->client(00000000) not null | |
[ 54.156127] [CAM] [CAM_VCM_CB] cam_on_check_vcm() START | |
[ 54.156127] [CAM] [CAM_VCM_CB] cam_on_check_vcm() END | |
[ 54.162628] [CAM] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
[ 54.162658] [CAM] msm_csid_init:204 | |
[ 54.166748] [CAM] msm_camio_probe_on: sinfo sensor name - ov4688 | |
[ 54.166778] [CAM] msm_camio_probe_on: camio_clk m(24000000) v(228570000) | |
[ 54.166809] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 54.166809] [CAM] m7_csi_vreg_on | |
[ 54.166839] 8921_l2: Failed to create debugfs directory | |
[ 54.166839] [CAM] [CAM]YushanII_open_init | |
[ 54.166839] [CAM] m7_rawchip_vreg_on | |
[ 54.166870] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 | |
[ 54.166870] 8921_lvs1: Failed to create debugfs directory | |
[ 54.167327] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0) | |
[ 54.172332] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 | |
[ 54.172363] 8921_s2: Failed to create debugfs directory | |
[ 54.172973] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0) | |
[ 54.178985] [CAM] rawchip external 1v2 gpio_request,177 rc(0) | |
[ 54.179016] [CAM] msm_camio_clk_enable: clk(00000000) obj.name:4-0010 | |
[ 54.182800] [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c | |
[ 54.182861] [CAM] ov4688_power_up called | |
[ 54.182861] [CAM] ov4688_power_down,sdata->htc_image=1 | |
[ 54.182861] [CAM] m7_ov4688_vreg_on | |
[ 54.182891] [CAM] m7_ov4688_vreg_on: 8921_lvs4 1800000 | |
[ 54.182891] 8921_lvs4: Failed to create debugfs directory | |
[ 54.183349] [CAM] m7_ov4688_vreg_on: 8921_lvs4 1800000 (0) | |
[ 54.188385] 8921_l8: Failed to create debugfs directory | |
[ 54.195983] 8921_l9: Failed to create debugfs directory | |
[ 54.197570] [CAM] msm_sensor_set_power_up: called 1920 | |
[ 54.209014] [CAM] ov4688_sensor_open_init: ov4688_s_ctrl.mirror_flip=2 | |
[ 54.209045] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 54.209045] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 54.209045] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 54.209075] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 54.209075] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 54.209075] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 54.209075] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 54.209106] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 54.209106] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 54.209106] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 54.209106] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 54.209136] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 54.209136] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 54.209136] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 54.209136] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 54.209167] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 54.209167] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 54.209167] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 54.209167] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 54.209197] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 54.209197] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 54.209197] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 54.209197] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 54.209228] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 54.209228] [CAM] msm_sensor_mode_init called | |
[ 54.209228] [CAM] msm_sensor_setting_parallel: update_type=0, res=0 | |
[ 54.209381] [CAM] oem_sensor_init: E | |
[ 54.209442] [CAM] ti201_i2c_add_driver_table called | |
[ 54.209442] [CAM] ti201_poweron_af enable AF actuator, gpio = 152 | |
[ 54.211914] [CAM] [OIS] HtcActOisBinder_open_init start | |
[ 54.211944] [CAM] [OIS] HtcActOisBinder_open_init FW_Version=0x7 | |
[ 54.313140] [CAM] msm_cam_server_subdev_notify: NOTIFY_CID_CHANGE intftype 0 | |
[ 54.419952] [CAM] [OIS] HtcActOisBinder_open_init g_otp_size=34 | |
[ 54.424163] [CAM] [OIS] Gyro Gain X0 : 0xbe | |
[ 54.424163] [CAM] [OIS] Corrected Gyro Gain X0 : 0xbe | |
[ 54.426025] [CAM] oem_sensor_init: X | |
[ 54.455139] [CAM] [OIS] HtcActOisBinder_open_init g_ois_mode=0 | |
[ 54.455139] [CAM] [OIS] HtcActOisBinder_open_init end | |
[ 54.505401] [CAM] msm_send_open_server qid 0 | |
[ 54.505432] [CAM] msm_enqueue: queue eventdata new max is 1 | |
[ 54.506530] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 54.506530] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 54.506530] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 54.506561] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 54.506561] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 54.506561] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 54.506561] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 54.506591] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 54.506591] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 54.506591] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 54.506591] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 54.506622] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 54.506622] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 54.506622] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 54.506622] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 54.506652] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 54.506652] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 54.506652] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 54.506652] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 54.506683] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 54.506683] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 54.506683] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 54.506713] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 54.506713] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 54.506713] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 54.507049] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=1 | |
[ 54.507080] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 54.507080] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 54.507110] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 54.507110] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 54.507110] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 54.507110] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 54.507141] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 54.507141] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 54.507141] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 54.507141] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 54.507171] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 54.507171] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 54.507171] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 54.507171] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 54.507202] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 54.507202] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 54.507202] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 54.507202] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 54.507232] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 54.507232] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 54.507232] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 54.507232] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 54.507263] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 54.507263] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 54.507263] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 54.507537] awb_calibration_show(3656) | |
[ 54.507690] awb_calibration_show(3656) | |
[ 54.507812] awb_calibration_show(3656) | |
[ 54.507873] [CAM] msm_sensor_mode_init called | |
[ 54.507873] [CAM] msm_sensor_setting_parallel: update_type=0, res=0 | |
[ 54.507873] [CAM] msm_sensor_setting_parallel: MSM_SENSOR_REG_INIT already inited | |
[ 54.509002] awb_calibration_show(3656) | |
[ 54.509124] awb_calibration_show(3656) | |
[ 54.509246] awb_calibration_show(3656) | |
[ 54.509307] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=1 | |
[ 54.511535] [CAM] msm_enqueue: queue control new max is 1 | |
[ 54.511566] [CAM] msm_open: serv_running[0] = 1 | |
[ 54.517944] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.518249] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.518493] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.518737] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.518951] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519165] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519348] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519500] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519653] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519805] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.519958] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520111] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520294] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520446] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520599] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520751] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.520874] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521057] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521179] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521331] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521484] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521636] ION cannot allocate un-secure memory from protected heap mm | |
[ 54.521942] [CAM] [FLT] msm_camera_flash state 3 | |
[ 54.521972] [CAM] m7_flashlight_control, linear led, mode=0 | |
[ 54.521972] [FLT]TPS flashlight_turn_off | |
[ 54.522155] [FLT]TPS tps61310_flashlight_control: mode: 0 | |
[ 54.522186] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 54.522186] [CAM] ov4688_read_fuseid: OTP Module vendor = 0x2 | |
[ 54.522216] [CAM] ov4688_read_fuseid: OTP LENS = 0x11 | |
[ 54.522216] [CAM] ov4688_read_fuseid: OTP Sensor Version = 0x10 | |
[ 54.522216] [CAM] ov4688_read_fuseid: OTP Driver IC Vendor & Version = 0x21 | |
[ 54.522216] [CAM] ov4688_read_fuseid: OTP Actuator vender ID & Version = 0x21 | |
[ 54.522247] [CAM] ov4688_read_fuseid: OTP fuse 0 = 0x0 | |
[ 54.522247] [CAM] ov4688_read_fuseid: OTP fuse 1 = 0x25 | |
[ 54.522247] [CAM] ov4688_read_fuseid: OTP fuse 2 = 0x67 | |
[ 54.522247] [CAM] ov4688_read_fuseid: OTP fuse 3 = 0x9b | |
[ 54.522277] [CAM] ov4688_read_fuseid: OTP BAIS Calibration data = 0xce | |
[ 54.522277] [CAM] ov4688_read_fuseid: OTP OFFSET Calibration data = 0xd9 | |
[ 54.522277] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (MSByte) = 0x0 | |
[ 54.522277] [CAM] ov4688_read_fuseid: OTP VCM bottom mech. Limit (LSByte) = 0x0 | |
[ 54.522308] [CAM] ov4688_read_fuseid: OTP Infinity position code (MSByte) = 0x0 | |
[ 54.522308] [CAM] ov4688_read_fuseid: OTP Infinity position code (LSByte) = 0xeb | |
[ 54.522308] [CAM] ov4688_read_fuseid: OTP Macro position code (MSByte) = 0x1 | |
[ 54.522308] [CAM] ov4688_read_fuseid: OTP Macro position code (LSByte) = 0x94 | |
[ 54.522430] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (MSByte) = 0xbe | |
[ 54.522430] [CAM] ov4688_read_fuseid: OTP VCM top mech. Limit (LSByte) = 0xf7 | |
[ 54.522460] [CAM] ov4688_read_fuseid: driver_ic=33 | |
[ 54.522460] [CAM] index=0 actuator_info->board_info->type=rumbas_act | |
[ 54.522460] [CAM] index=1 actuator_info->board_info->type=ti201_act | |
[ 54.522491] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->type=ti201_act | |
[ 54.522491] [CAM] ov4688_read_fuseid: sdata->actuator_info->board_info->addr=0x1c | |
[ 54.522491] [CAM] OTP_data[2] 0 OTP_data[3] 235 OTP_data[4] 1 OTP_data[5] 148 | |
[ 54.522552] [CAM] VCM_Start = 0 | |
[ 54.522552] [CAM] VCM_Infinity = 175 | |
[ 54.522552] [CAM] VCM_Macro = 404 | |
[ 54.522552] [CAM] VCM Module vendor = = 0 | |
[ 54.527618] awb_calibration_show(3656) | |
[ 54.527923] awb_calibration_show(3656) | |
[ 54.528167] awb_calibration_show(3656) | |
[ 54.544860] [CAM] [OIS] ti201_act_set_ois_mode ois_mode:2 | |
[ 54.544860] [CAM] [OIS] HtcActOisBinder_act_set_ois_mode ois_mode=2 | |
[ 54.554199] [CAM] msm_camera_v4l2_s_parmpath=1,rc=0 | |
[ 54.554260] [CAM] msm_camera_v4l2_s_parmpath=8,rc=0 | |
[ 54.681060] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 54.681091] [CAM] msm_close Closing down instance 00000000, [2, 1] | |
[ 54.681121] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 54.681121] [CAM] msm_close Closing down instance 00000000, [1, 1] | |
[ 54.681854] [CAM] msm_close Inst 00000000 freeing buffer offsets array | |
[ 54.681854] [CAM] msm_close Closing down instance 00000000, [0, 1] | |
[ 54.681915] [CAM] msm_send_close_server qid 0 | |
[ 54.685577] [CAM] [FLT] msm_camera_flash state 4 | |
[ 54.685577] [CAM] m7_flashlight_control, linear led, mode=0 | |
[ 54.685607] [FLT]TPS flashlight_turn_off | |
[ 54.685852] [FLT]TPS tps61310_flashlight_control: mode: 0 | |
[ 54.686737] [CAM] msm_send_close_server: serv_running[0] = 0 | |
[ 54.686828] [CAM] vpe_reset: VPE already disabled. | |
[ 54.686828] [CAM] vpe_disable, vpe_ctrl->state 0 | |
[ 54.686828] [CAM] vpe_disable: VPE already disabled | |
[ 54.690734] [CAM] msm_csiphy_release MIPI_CSIPHY_GLBL_PWR_CFG_ADDR=0x0 | |
[ 54.691253] [CAM] [OIS] HtcActOisBinder_open_init start | |
[ 54.691253] [CAM] [OIS] HtcActOisBinder_open_init FW_Version=0x7 | |
[ 54.881103] [CAM] [OIS] HtcActOisBinder_open_init g_otp_size=34 | |
[ 54.883270] [CAM] [OIS] Gyro Gain X0 : 0xbe | |
[ 54.883270] [CAM] [OIS] Corrected Gyro Gain X0 : 0xbe | |
[ 54.913238] [CAM] [OIS] HtcActOisBinder_open_init g_ois_mode=2 | |
[ 54.916900] [CAM] [OIS] HtcActOisBinder_open_init end | |
[ 54.916900] [CAM] ti201_poweroff_af disable AF actuator, gpio = 152 | |
[ 54.952545] [CAM] [CAM]YushanII_release | |
[ 54.953094] [CAM] YushanII_power_down | |
[ 54.954101] [CAM] m7_rawchip_vreg_off | |
[ 54.956604] [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off | |
[ 54.957061] [CAM] m7_csi_vreg_off | |
[ 54.957092] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 54.957092] [CAM] ov4688_power_down called | |
[ 54.957092] [CAM] msm_sensor_set_power_down: called 1956 | |
[ 54.959197] [CAM] m7_ov4688_vreg_off | |
[ 55.010589] [CAM] msm_release_ion_client Calling ion_client_destroy | |
[ 55.479949] init: starting service 'vendor.sensors-hal-1-0'... | |
[ 55.489288] [LED]pm8xxx_led_set +++ | |
[ 55.489288] [LED]pm8xxx_led_set --- | |
[ 55.489379] [LED]pm8xxx_led_current_set, bank:6, brightness:0 +++ | |
[ 55.489562] [LED]pm8xxx_led_current_set, bank:6, brightness:0 --- | |
[ 55.912994] init: Service 'vendor.sensors-hal-1-0' (pid 1131) exited with status 0 | |
[ 55.913055] init: Sending signal 9 to service 'vendor.sensors-hal-1-0' (pid 1131) process group... | |
[ 55.913421] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1131 in 0ms | |
[ 56.099975] [LED]pm8xxx_led_set +++ | |
[ 56.100006] [LED]pm8xxx_led_set --- | |
[ 56.100097] [LED]pm8xxx_led_current_set, bank:6, brightness:255 +++ | |
[ 56.100280] [LED]pm8xxx_led_current_set, bank:6, brightness:255 --- | |
[ 58.402526] [BT]-- HOST BT_WAKE=HIGH, 3 -- | |
[ 58.402618] [BT]CHK CLK OFF, BT_WAKE=HIGH | |
[ 58.402648] [BT]- DIS RFR, 2 - | |
[ 58.502746] [BT]CHK CLK OFF rx.flush:0 | |
[ 60.486602] init: starting service 'vendor.sensors-hal-1-0'... | |
[ 60.622924] init: Service 'vendor.sensors-hal-1-0' (pid 1156) exited with status 0 | |
[ 60.623016] init: Sending signal 9 to service 'vendor.sensors-hal-1-0' (pid 1156) process group... | |
[ 60.623352] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1156 in 0ms | |
[ 60.833984] init: Service 'bootanim' (pid 430) exited with status 0 oneshot service took 32.914001 seconds in background | |
[ 60.834045] init: Sending signal 9 to service 'bootanim' (pid 430) process group... | |
[ 60.834350] libprocessgroup: Successfully killed process cgroup uid 1003 pid 430 in 0ms | |
[ 60.900451] [LED]pm8xxx_led_set +++ | |
[ 60.900482] [LED]pm8xxx_led_set --- | |
[ 60.900512] [LED]pm8xxx_led_set +++ | |
[ 60.900512] [LED]pm8xxx_led_set --- | |
[ 60.900543] [LED]pm8xxx_led_blink_store: bank 4 blink 0 sync 0 | |
[ 60.900543] [LED]pm8xxx_led_blink_store: bank 5 blink 0 sync 0 | |
[ 60.900604] [LED]pm8xxx_led_current_set, bank:4, brightness:1 +++ | |
[ 60.900695] [LED]pm8xxx_led_current_set, bank:4, brightness:1 --- | |
[ 60.900695] [LED]pm8xxx_led_current_set, bank:5, brightness:0 +++ | |
[ 60.900726] [LED]pm8xxx_led_current_set, bank:5, brightness:0 --- | |
[ 60.900756] [LED]led_blink_work_func +++ | |
[ 60.900756] [LED]pm8xxx_led_blink: bank 4 blink 0 sync 0 | |
[ 60.900817] [LED]led_blink_work_func --- | |
[ 60.900848] [LED]led_blink_work_func +++ | |
[ 60.900848] [LED]pm8xxx_led_blink: bank 5 blink 0 sync 0 | |
[ 60.900878] [LED]led_blink_work_func --- | |
[ 61.034149] init: processing action (sys.boot_completed=1) from (/system/etc/init/hw/init.rc:978) | |
[ 61.034973] init: starting service 'exec 13 (/bin/rm -rf /data/per_boot)'... | |
[ 61.072845] init: SVC_EXEC service 'exec 13 (/bin/rm -rf /data/per_boot)' pid 1164 (uid 1000 gid 1000+0 context default) started; waiting... | |
[ 61.073608] init: Service 'exec 13 (/bin/rm -rf /data/per_boot)' (pid 1164) exited with status 0 waiting took 0.037000 seconds | |
[ 61.073669] init: Sending signal 9 to service 'exec 13 (/bin/rm -rf /data/per_boot)' (pid 1164) process group... | |
[ 61.074005] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1164 in 0ms | |
[ 61.124694] selinux: SELinux: Skipping restorecon on directory(/data/system_ce/0) | |
[ 61.124725] selinux: | |
[ 61.131103] selinux: SELinux: Skipping restorecon on directory(/data/vendor_ce/0) | |
[ 61.131103] selinux: | |
[ 61.135070] selinux: SELinux: Skipping restorecon on directory(/data/misc_ce/0) | |
[ 61.135101] selinux: | |
[ 61.267578] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.rc:375) | |
[ 61.267883] init: Sending signal 9 to service 'vendor.media.omx' (pid 412) process group... | |
[ 61.272003] msm_vidc_dec: Inside vid_dec_release_secure() | |
[ 61.277587] libprocessgroup: Successfully killed process cgroup uid 1046 pid 412 in 9ms | |
[ 61.282592] Unsecuring.... | |
[ 61.322967] msm_vidc_dec: Return from vid_dec_release_secure() | |
[ 61.323028] binder: release 412:412 transaction 28847 in, still active | |
[ 61.323028] binder: send failed reply for transaction 28847 to 403:667 | |
[ 61.323059] binder: undelivered death notification, 00000000ac595440 | |
[ 61.403350] init: Command 'restart vendor.media.omx' action=sys.boot_completed=1 (/vendor/etc/init/hw/init.qcom.rc:376) took 135ms and succeeded | |
[ 61.403869] init: Service 'vendor.media.omx' (pid 412) received signal 9 | |
[ 61.405029] init: Control message: Could not find 'android.hardware.media.omx@1.0::IOmx/default' for ctl.interface_start from pid: 220 (/system/bin/hwservicemanager) | |
[ 61.405151] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.qcom.power.rc:102) | |
[ 61.406799] init: starting service 'vendor.media.omx'... | |
[ 61.494964] init: Control message: Could not find 'android.hardware.media.omx@1.0::IOmx/default' for ctl.interface_start from pid: 220 (/system/bin/hwservicemanager) | |
[ 61.495117] init: processing action (sys.boot_completed=1) from (/system/etc/init/aicp-system.rc:17) | |
[ 61.495483] init: processing action (sys.boot_completed=1 && sys.bootstat.first_boot_completed=0) from (/system/etc/init/bootstat.rc:77) | |
[ 61.496337] init: starting service 'exec 14 (/system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'... | |
[ 61.572906] init: Command 'exec_background - system log -- /system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l' action=sys.boot_completed=1 && sys.bootstat.first_boot_completed=0 (/sd | |
[ 61.574035] init: Service 'exec 14 (/system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)' (pid 1216) exited with status 0 oneshot service took 0.076000 seconds in background | |
[ 61.574127] init: Sending signal 9 to service 'exec 14 (/system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)' (pid 1216) process group... | |
[ 61.574493] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1216 in 0ms | |
[ 61.653808] msm_vidc_dec: Inside vid_dec_open() | |
[ 61.654083] | |
[ 61.654083] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 61.672851] | |
[ 61.672851] <ERROR>: fw_version 7:25:2014 | |
[ 61.682922] msm_vidc_dec: Inside vid_dec_release() | |
[ 61.694732] init: processing action (sys.boot_completed=1) from (/system/etc/init/flags_health_check.rc:7) | |
[ 61.706207] init: processing action (sys.boot_completed=1) from (/system/etc/init/logd.rc:33) | |
[ 61.707275] init: starting service 'logd-auditctl'... | |
[ 61.711120] msm_vidc_dec: Return from vid_dec_release() | |
[ 61.754974] msm_vidc_dec: Inside vid_dec_open() | |
[ 61.755340] | |
[ 61.755340] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 61.763519] init: Command 'start logd-auditctl' action=sys.boot_completed=1 (/system/etc/init/logd.rc:34) took 57ms and succeeded | |
[ 61.763824] init: Service 'logd-auditctl' (pid 1231) exited with status 0 oneshot service took 0.055000 seconds in background | |
[ 61.763885] init: Sending signal 9 to service 'logd-auditctl' (pid 1231) process group... | |
[ 61.764190] libprocessgroup: Successfully killed process cgroup uid 1036 pid 1231 in 0ms | |
[ 61.775665] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 61.775817] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 61.775939] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 61.777160] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 61.778594] | |
[ 61.778594] <ERROR>: fw_version 7:25:2014 | |
[ 61.791107] msm_vidc_dec: Inside vid_dec_release() | |
[ 61.806365] msm_vidc_dec: Return from vid_dec_release() | |
[ 61.808959] msm_vidc_dec: Inside vid_dec_open() | |
[ 61.809234] | |
[ 61.809234] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 61.832885] | |
[ 61.832885] <ERROR>: fw_version 7:25:2014 | |
[ 61.840118] msm_vidc_dec: Inside vid_dec_release() | |
[ 61.856323] msm_vidc_dec: Return from vid_dec_release() | |
[ 61.904327] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=0) from (/system/etc/init/wifi.rc:28) | |
[ 61.905792] selinux: SELinux: Could not get canonical path for /sys/kernel/debug/tracing/instances/wifi restorecon: No such file or directory. | |
[ 61.905792] selinux: | |
[ 61.910766] selinux: SELinux: Could not get canonical path for /sys/kernel/tracing/instances/wifi restorecon: No such file or directory. | |
[ 61.910797] selinux: | |
[ 61.953277] msm_vidc_venc: Inside vid_enc_open() | |
[ 61.953308] | |
[ 61.953308] msm_vidc_enc: Inside vid_enc_open_client() | |
[ 61.953674] | |
[ 61.953674] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 61.962371] init: processing action (dev.bootcomplete=1) from (/vendor/etc/init/hw/init.qcom.power.rc:108) | |
[ 61.964569] init: Command 'rm /data/system/perfd/default_values' action=dev.bootcomplete=1 (/vendor/etc/init/hw/init.qcom.power.rc:110) took 0ms and failed: unlink() failed: No such file or directory | |
[ 61.964874] init: Command 'rm /data/system/default_values' action=dev.bootcomplete=1 (/vendor/etc/init/hw/init.qcom.power.rc:111) took 0ms and failed: unlink() failed: No such file or directory | |
[ 61.966156] init: processing action (sys.user.0.ce_available=true) from (/system/etc/init/wifi.rc:21) | |
[ 61.969421] selinux: SELinux: Skipping restorecon on directory(/data/misc_ce/0/apexdata/com.android.wifi) | |
[ 61.969451] selinux: | |
[ 61.969726] init: processing action (enable-low-power) from (/vendor/etc/init/hw/init.qcom.power.rc:6) | |
[ 61.972991] | |
[ 61.972991] <ERROR>: fw_version 7:25:2014 | |
[ 61.979522] | |
[ 61.979522] msm_vidc_enc: Inside vid_enc_release() | |
[ 61.979553] | |
[ 61.979553] msm_vidc_enc: Inside vid_enc_close_client() | |
[ 62.002777] | |
[ 62.002777] msm_vidc_enc: Return from vid_enc_release() | |
[ 62.027465] msm_vidc_venc: Inside vid_enc_open() | |
[ 62.027465] | |
[ 62.027465] msm_vidc_enc: Inside vid_enc_open_client() | |
[ 62.027740] | |
[ 62.027740] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 62.052856] | |
[ 62.052856] <ERROR>: fw_version 7:25:2014 | |
[ 62.054534] msm_thermal: Core control disabled | |
[ 62.058349] | |
[ 62.058349] msm_vidc_enc: Inside vid_enc_release() | |
[ 62.058380] | |
[ 62.058380] msm_vidc_enc: Inside vid_enc_close_client() | |
[ 62.058959] init: Command 'write /sys/devices/system/cpu/cpu1/online 1' action=enable-low-power (/vendor/etc/init/hw/init.qcom.power.rc:33) took 4ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu1/online': Unable tt | |
[ 62.067901] init: Command 'write /sys/devices/system/cpu/cpu2/online 1' action=enable-low-power (/vendor/etc/init/hw/init.qcom.power.rc:34) took 7ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu2/online': Unable tt | |
[ 62.069763] init: Command 'write /sys/devices/system/cpu/cpu3/online 1' action=enable-low-power (/vendor/etc/init/hw/init.qcom.power.rc:35) took 1ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu3/online': Unable tt | |
[ 62.078552] | |
[ 62.078552] msm_vidc_enc: Return from vid_enc_release() | |
[ 62.082580] [BATT] batt_worker: total_time since last batt update = 60100 ms. at 62080072836 (2022-04-14 19:22:48.887379190 UTC) | |
[ 62.092864] [BATT][BMS] cc_uah = 17550uAh, raw->cc = 3eb8d1, cc = 4110545 after subtracting 0 | |
[ 62.098541] [BATT][BMS] FCC=2300000,UC=115000,RC=1702000,CC=17551,CC_reset=0,RUC=1569449,SOC=72,SOC_R=1809900,start_percent=72,end_percent=-22,OCV=4045395,OCV_raw=4060395,rbatt=307,rbatt_sf=123,batt_temp=250,soc_rbatt=73,last_rbatt=0 | |
[ 62.098571] [BATT][BMS] pm8921_bms_get_batt_soc: state_of_charge=72, store_soc_ui=72, last_good_ocv_uv=4045395, raw.cc=4110734, stored_cc_uv:4110734, currtime_ms=696727223 | |
[ 62.098663] [BATT] pre_level=72, new_level=72, level would use raw level! | |
[ 62.098693] [BATT] prev_chg_src=1, prev_chg_en=1, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reason=0x0, prev_pwrsrc_enabled=1, context_state=0x0, pre_screen/cur_screen=1/1, htc_extension0 | |
[ 62.106475] msm_vidc_venc: Inside vid_enc_open() | |
[ 62.106506] | |
[ 62.106506] msm_vidc_enc: Inside vid_enc_open_client() | |
[ 62.106750] | |
[ 62.106750] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 | |
[ 62.109954] [BATT][CHG] V=3903 mV, I=568 mA, T=25 C, SoC=72%, FCC=2300000, id=116 mV, H=1, P=1, CHG=3, S=1, FSM=7, AC=0, USB=1, DC=0, WLC=0 iusb_ma=500, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_a0 | |
[ 62.112182] [BATT] ID=2,level=72,level_raw=72,vol=3910,temp=250,current=568200,chg_src=1,chg_en=1,pj_src=0,pj_level=0,full_bat=2300,over_vchg=0,batt_state=1,overload=0,ui_chg_full=0 at 62109705404 (2022-04-14 19:22:48.917011757 UTC) | |
[ 62.112213] [BATT] power_supply_changed: battery at 62109735921 (2022-04-14 19:22:48.917042275 UTC) | |
[ 62.112243] [BATT] batt_worker: done | |
[ 62.119506] healthd: battery l=72 v=3902 t=25.0 h=2 st=2 c=507500 fc=2300000 chg=u | |
[ 62.132904] | |
[ 62.132904] <ERROR>: fw_version 7:25:2014 | |
[ 62.140563] | |
[ 62.140563] msm_vidc_enc: Inside vid_enc_release() | |
[ 62.140594] | |
[ 62.140594] msm_vidc_enc: Inside vid_enc_close_client() | |
[ 62.150665] msm_thermal: Core control enabled | |
[ 62.157287] mpd msm_mpd_attr_em_max_util_pct_store: Error -22 returned when setting algo param em_max_util_pct to 97 | |
[ 62.157348] | |
[ 62.157348] msm_vidc_enc: Return from vid_enc_release() | |
[ 62.164062] mpd msm_mpd_attr_em_win_size_max_us_store: Error -22 returned when setting algo param em_win_size_max_us to 1000000 | |
[ 62.165771] mpd msm_mpd_attr_em_win_size_min_us_store: Error -22 returned when setting algo param em_win_size_min_us to 100000 | |
[ 62.169067] mpd msm_mpd_attr_mp_em_rounding_point_min_store: Error -22 returned when setting algo param mp_em_rounding_point_min to 10 | |
[ 62.170776] mpd msm_mpd_attr_mp_em_rounding_point_max_store: Error -22 returned when setting algo param mp_em_rounding_point_max to 85 | |
[ 62.172576] mpd msm_mpd_attr_online_util_pct_min_store: Error -22 returned when setting algo param online_util_pct_min to 3 | |
[ 62.174133] mpd msm_mpd_attr_online_util_pct_max_store: Error -22 returned when setting algo param online_util_pct_max to 25 | |
[ 62.188781] mpd msm_mpd_attr_slack_time_max_us_store: Error -22 returned when setting algo param slack_time_max_us to 45000 | |
[ 62.193939] mpd msm_mpd_attr_slack_time_min_us_store: Error -22 returned when setting algo param slack_time_min_us to 15000 | |
[ 62.195404] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=1 && wifi.interface=*) from (/system/etc/init/wifi.rc:98) | |
[ 62.197845] init: processing action (sys.io.scheduler=*) from (/system/etc/init/aicp-iosched.rc:34) | |
[ 62.203124] init: processing action (sys.io.scheduler=bfq) from (/system/etc/init/aicp-iosched.rc:59) | |
[ 62.270721] init: Command 'restorecon --recursive /sys/block/mmcblk0/queue' action=sys.io.scheduler=bfq (/system/etc/init/aicp-iosched.rc:60) took 67ms and succeeded | |
[ 62.270843] selinux: SELinux: Could not get canonical path for /sys/block/mmcblk1/queue restorecon: No such file or directory. | |
[ 62.270874] selinux: | |
[ 62.270965] selinux: SELinux: Could not get canonical path for /sys/block/sda/queue restorecon: No such file or directory. | |
[ 62.271026] selinux: | |
[ 62.271118] selinux: SELinux: Could not get canonical path for /sys/block/sde/queue restorecon: No such file or directory. | |
[ 62.271148] selinux: | |
[ 62.271240] selinux: SELinux: Could not get canonical path for /sys/block/dm-0/queue restorecon: No such file or directory. | |
[ 62.271240] selinux: | |
[ 62.620513] ------------[ cut here ]------------ | |
[ 62.620544] WARNING: at /root/kernel/htc/msm8960/kernel/softirq.c:159 local_bh_enable_ip+0x54/0xd0() | |
[ 62.620574] [<c010b6ec>] (unwind_backtrace+0x0/0xec) from [<c0197070>] (warn_slowpath_null+0x38/0x50) | |
[ 62.620574] [<c0197070>] (warn_slowpath_null+0x38/0x50) from [<c019e3a4>] (local_bh_enable_ip+0x54/0xd0) | |
[ 62.620605] [<c019e3a4>] (local_bh_enable_ip+0x54/0xd0) from [<c098b230>] (cfg80211_bss_update+0x150/0x504) | |
[ 62.620605] [<c098b230>] (cfg80211_bss_update+0x150/0x504) from [<c098bb88>] (cfg80211_inform_bss_frame+0x148/0x188) | |
[ 62.620635] [<c098bb88>] (cfg80211_inform_bss_frame+0x148/0x188) from [<c05d7a90>] (wl_inform_single_bss+0x520/0x610) | |
[ 62.620666] [<c05d7a90>] (wl_inform_single_bss+0x520/0x610) from [<c05d7f28>] (wl_inform_bss+0x7c/0xb0) | |
[ 62.620666] [<c05d7f28>] (wl_inform_bss+0x7c/0xb0) from [<c05decd0>] (wl_escan_handler+0xcb0/0x12a0) | |
[ 62.620697] [<c05decd0>] (wl_escan_handler+0xcb0/0x12a0) from [<c05ecffc>] (wl_event_handler+0x6ac/0x818) | |
[ 62.620697] [<c05ecffc>] (wl_event_handler+0x6ac/0x818) from [<c01b5de4>] (kthread+0xb0/0xbc) | |
[ 62.620727] [<c01b5de4>] (kthread+0xb0/0xbc) from [<c01066bc>] (kernel_thread_exit+0x0/0x8) | |
[ 62.620727] ---[ end trace da227214a82491b9 ]--- | |
[ 62.762390] sdcardfs version 2.0 | |
[ 62.762420] sdcardfs: dev_name -> /data/media | |
[ 62.762420] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,unshared_obb,mask=6,userid=0,gid=1015 | |
[ 62.762420] sdcardfs: mnt -> e92f90d0 | |
[ 62.762481] sdcardfs: mounted on top of /data/media type ext4 | |
[ 62.762878] SELinux: initialized (dev sdcardfs, type sdcardfs), uses genfs_contexts | |
[ 62.775726] Remount options were mask=23,gid=9997 for vfsmnt e99d0d90. | |
[ 62.775756] sdcardfs : options - debug:1 | |
[ 62.775756] sdcardfs : options - gid:9997 | |
[ 62.775756] sdcardfs : options - mask:23 | |
[ 62.776336] Remount options were mask=7,gid=9997 for vfsmnt e99d0a90. | |
[ 62.776336] sdcardfs : options - debug:1 | |
[ 62.776336] sdcardfs : options - gid:9997 | |
[ 62.776367] sdcardfs : options - mask:7 | |
[ 62.776733] Remount options were mask=7,gid=9997 for vfsmnt e9216310. | |
[ 62.776763] sdcardfs : options - debug:1 | |
[ 62.776763] sdcardfs : options - gid:9997 | |
[ 62.776763] sdcardfs : options - mask:7 | |
[ 62.885345] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts | |
[ 63.112091] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.112274] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.112396] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.113922] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.464569] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.464752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.464904] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 63.467437] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 64.238769] [NFC] pn544_dev_open : major=10, minor=93 | |
[ 64.238983] [NFC] pn544_dev_ioctl power on (delay50) | |
[ 64.239013] [NFC] pn544_Enable: gpio=181 set_value=0 | |
[ 64.302703] [NFC] pn544_dev_ioctl power off (delay50) | |
[ 64.302734] [NFC] pn544_Disable: gpio=181 set_value=1 | |
[ 64.362609] [NFC] pn544_dev_ioctl power on (delay50) | |
[ 64.362640] [NFC] pn544_Enable: gpio=181 set_value=0 | |
[ 64.392456] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 64.392761] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 64.392944] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 64.396301] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 65.489532] init: starting service 'vendor.sensors-hal-1-0'... | |
[ 65.678161] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 65.678375] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 65.678497] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 65.679748] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 65.993774] init: Service 'vendor.sensors-hal-1-0' (pid 1652) exited with status 0 | |
[ 65.993835] init: Sending signal 9 to service 'vendor.sensors-hal-1-0' (pid 1652) process group... | |
[ 65.994262] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1652 in 0ms | |
[ 66.202117] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 66.202392] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 66.202636] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 66.203887] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.244720] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.244873] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.244964] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.246154] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.383178] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.383331] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.383422] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.384613] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.875396] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.875549] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.875640] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.876861] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 67.949432] [LED]pm8xxx_led_set +++ | |
[ 67.949462] [LED]pm8xxx_led_set --- | |
[ 67.949523] [LED]pm8xxx_led_current_set, bank:6, brightness:0 +++ | |
[ 67.949737] [LED]pm8xxx_led_current_set, bank:6, brightness:0 --- | |
[ 68.038269] type=1400 audit(1649964174.833:7): avc: denied { write } for comm="ks" name="/" dev="mmcblk0p37" ino=2 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:system_data_root_file:s0 tclass=dir permissive=0 | |
[ 68.370971] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 68.371124] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 68.371215] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 68.372436] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
[ 70.077972] [CAM] msm_open use_count 1 | |
[ 70.078063] [CAM] msm_open: pmctl->client(00000000) not null | |
[ 70.078124] [CAM] [CAM_VCM_CB] cam_on_check_vcm() START | |
[ 70.078124] [CAM] [CAM_VCM_CB] cam_on_check_vcm() END | |
[ 70.087188] [CAM] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
[ 70.087188] [CAM] msm_csid_init:204 | |
[ 70.091308] [CAM] msm_camio_probe_on: sinfo sensor name - ov2722 | |
[ 70.091339] [CAM] msm_camio_probe_on: camio_clk m(24000000) v(228570000) | |
[ 70.091339] [CAM] msm_camio_config_gpio_table: no cam gpio config table | |
[ 70.091369] [CAM] m7_csi_vreg_on | |
[ 70.091400] 8921_l2: Failed to create debugfs directory | |
[ 70.091430] [CAM] [CAM]YushanII_open_init | |
[ 70.091430] [CAM] m7_rawchip_vreg_on | |
[ 70.091430] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 | |
[ 70.091461] 8921_lvs1: Failed to create debugfs directory | |
[ 70.091888] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0) | |
[ 70.096923] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 | |
[ 70.096954] 8921_s2: Failed to create debugfs directory | |
[ 70.097564] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0) | |
[ 70.103576] [CAM] rawchip external 1v2 gpio_request,177 rc(0) | |
[ 70.103637] [CAM] msm_camio_clk_enable: clk(00000000) obj.name:4-0036 | |
[ 70.107360] [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c | |
[ 70.107421] [CAM] ov2722_power_up | |
[ 70.107452] [CAM] m7_ov2722_vreg_on | |
[ 70.109466] [CAM] check_yushanII_flag: With yushanII | |
[ 70.160491] [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000 | |
[ 70.160522] 8921_lvs4: Failed to create debugfs directory | |
[ 70.161010] [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000 (0) | |
[ 70.166015] [CAM] m7_ov2722_vreg_on: 8921_l8 2800000 | |
[ 70.166046] 8921_l8: Failed to create debugfs directory | |
[ 70.166625] [CAM] m7_ov2722_vreg_on: 8921_l8 2800000 (0) | |
[ 70.171630] [CAM] m7_ov2722_vreg_on: CAM_PIN_GPIO_CAM_SEL (0) | |
[ 70.180938] [CAM] ov2722_read_fuseid called | |
[ 70.180938] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 70.180938] [CAM] ov2722_power_up end | |
[ 70.180969] [CAM] msm_sensor_mode_init called | |
[ 70.180969] [CAM] msm_sensor_setting_parallel_ov: update_type=0, res=0 | |
[ 70.181121] [CAM] oem_sensor_init_ov: E | |
[ 70.199432] [CAM] msm_cam_server_subdev_notify: NOTIFY_CID_CHANGE intftype 0 | |
[ 70.222625] [CAM] oem_sensor_init_ov: X | |
[ 70.236785] [CAM] msm_send_open_server qid 0 | |
[ 70.236816] [CAM] msm_enqueue: queue eventdata new max is 1 | |
[ 70.237915] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 70.237915] [CAM] ov2722_read_fuseid called | |
[ 70.237915] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 70.238281] [CAM] msm_get_sensor_info,sdata->htc_image=1,sdata->use_rawchip=0,sdata->hdr_mode=0,sdata->video_hdr_capability=0 | |
[ 70.238311] [CAM] Line:1750 CFG_I2C_IOCTL_R_OTP | |
[ 70.238311] [CAM] ov2722_read_fuseid called | |
[ 70.238342] [CAM] ov2722: catched fuse->fuse_id : 0x44 0x2 0x22 0xc9 | |
[ 70.238616] awb_calibration_front_show(3656) | |
[ 70.238800] awb_calibration_front_show(3656) | |
[ 70.238922] awb_calibration_front_show(3656) | |
[ 70.238983] [CAM] msm_sensor_mode_init called |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment