kj800x

preface: Posting these online since it sounds like these notes are somewhat interesting based on a few folks I've shared with. These are semi-rough notes that I basically wrote for myself in case I ever needed to revisit this fix, so keep that in mind.

I recently bought an LG ULTRAGEAR monitor secondhand off of a coworker. I really love it and it's been great so far, but I ran into some minor issues with it in Linux. It works great on both Mac and Windows, but on Linux it displays just a black panel until I use the second monitor to go in and reduce the refresh rate down to 60 Hz.

This has worked decent so far but there's some issues:

• It doesn't work while linux is booting up. The motherboards boot sequence is visible just fine, but as soon as control is handed over to Linux and I'd normally see a splash screen while I'm waiting for my login window, I see nothing.
• It doesn't work on the login screen. This would be fine if login consistently worked on my second screen, but I need to manually switch

pydevops

• 0.1. References
• 0.2. Other cheatsheets
• 0.3. Manage multiple gcloud config configurations
  • 0.3.1. Switch gcloud context with gcloud config
• 0.4. Credentials
• 0.5. info
• 0.6. projects
• 0.7. zones & regions
• 0.8. Organization
• 0.9. billing

0XDE57

ABOUT

about:config settings to harden the Firefox browser. Privacy and performance enhancements.
To change these settings type 'about:config' in the url bar. Then search the setting you would like to change and modify the value. Some settings may break certain websites from functioning and rendering normally. Some settings may also make firefox unstable. I am not liable for any damages/loss of data.

Not all these changes are necessary and will be dependent upon your usage and hardware. Do some research on settings if you don't understand what they do. These settings are best combined with your standard privacy extensions (HTTPS Everywhere No longer required: Enable HTTPS-Only Mode, NoScript/Request Policy, uBlock origin, agent spoofing, Privacy Badger etc), and all plugins set to "Ask To Activate".

tsiege

ANNOUNCEMENT

I have moved this over to the Tech Interview Cheat Sheet Repo and has been expanded and even has code challenges you can run and practice against!






\

Chaser324

Whether you're trying to give back to the open source community or collaborating on your own projects, knowing how to properly fork and generate pull requests is essential. Unfortunately, it's quite easy to make mistakes or not know what you should do when you're initially learning the process. I know that I certainly had considerable initial trouble with it, and I found a lot of the information on GitHub and around the internet to be rather piecemeal and incomplete - part of the process described here, another there, common hangups in a different place, and so on.

In an attempt to coallate this information for myself and others, this short tutorial is what I've found to be fairly standard procedure for creating a fork, doing your work, issuing a pull request, and merging that pull request back into the original project.

Creating a Fork

Just head over to the GitHub page and click the "Fork" button. It's just that simple. Once you've done that, you can use your favorite git client to clone your repo or j