krissen

I've long been searching for a simple display to show various things on HA. I wanted it to be cordless with wireless updates, small in size, and without extra sensors since the values to be displayed are already in HA. It's been hard to find something that matches all that, at a reasonable price.

I just stumbled upon a Reddit thread (since removed), where someone recommended OpenEPaperLink and this seller on Tindie. An access point for $35. Five screens (2.9" or 1.54") for $25; a 4.2" for $20. (It seems many have been looking for the same thing. The seller quickly ran out of stock, but more is on the way; more info at the link above.)

There's a HA integration via HACS.

You'll find my example of an automation that updates humidity and temperature here.

It was easy to get

tetele

⚠️ CONFIG WAS MOVED HERE ⚠️

https://github.com/tetele/onju-voice-satellite

This Gist will no longer be maintained, please check out the new location for the config.

Introduction

Ever since voice satellites were introduced to Home Assistant, people wanted to use good microphones and speakers for this purpose, but not many were really available.

toddrob99

blueprint:
  name: Frigate Notification (0.10.0) (toddrob99)
  description: |
    ## Frigate Mobile App Notification

    This blueprint will send a notification to your device when a Frigate event for the selected camera is fired. The notification will initially include the thumbnail of the detection, but include an actionable notification allowing you to view the clip and snapshot.

    With this blueprint, you may send the notification to multiple devices by leaving "Device" blank and instead use a [notification group][1].

    ### Software Version Requirements

dcode

How to setup Grandstream DP750 for Unifi Talk

I've seen several posts on Reddit and other forums that say "oh you can use a grandstream phone with UniFi Talk and it's flawless". Unfortunately, I am not a VoIP engineer so it was not intuitive to me, but I got it to work. Here's how.

For this writeup, I'm using a Grandstream DP750 DECT base with a DP720 DECT wireless handset. I really wanted a wireless phone for general use in my house, but Ubiquiti doesn't make one, so I wanted to find a way. My goal is to setup UniFi Talk for my home phone solution and share a single phone number with a UniFi wired phone that sits on my office desk. As far as I know, you have to get a UniFi phone to do the initial Talk setup (though, in my tinkering, I noticed it's using a PostgreSQL database, you could probably bypass the initial setup if you knew what you were doing). I'm also using a UDM-Pro for my gateway.

Assuming your UDM-Pro management interface is on 192.168.1.1, your base station should be assigned an IP on a VL

hunterjm

blueprint:
  name: Frigate Notification
  description: |
    ## Frigate Mobile App Notification

    This blueprint will send a notification to your device when a Frigate event for the selected camera is fired. The notification will initially include the thumbnail of the detection, but will update to include actionable notifications allowing you to view the saved clip/snapshot when available, or silence the notification for a configurable amount of time.

    With this blueprint, you may send the notification to multiple devices by leaving "Device" blank and instead use a [notification group][1].

    ### Required entities:

clabland

#!/bin/bash

killall omxplayer.bin || true

# A four camera grid on a 1920x1080 monitor.

screen -dmS topleft sh -c 'omxplayer --win "0 0 960 540" -n -1 --avdict rtsp_transport:tcp "YOUR_RTSP_FEED"; exec bash'

screen -dmS topright sh -c 'omxplayer --win "960 0 1920 540" -n -1 --avdict rtsp_transport:tcp "rtsp://YOUR_RTSP_FEED"; exec bash'

igresc

• Login (replace URL, PORT, USER, PASS)
  • https://URL:PORT/webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account=USER&passwd=PASS

for ActiveBackup its the following urls

• Get Activationstatus
  • https://URL:PORT/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=get&version=1
• Set ActivationStatus (use your SERIALNUMBER)
• https://URL:PORT/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="SERIALNUMBER"

Caio99BR

#!/bin/bash
## Build Script by Caio Oliveira aka Caio99BR <caiooliveirafarias0@gmail.com>
# For Open-PS2-Loader
## Thanks to:
# - izdubar@psx-scene and jimmikaelkael@psx-scene
#   <http://psx-scene.com/forums/f150/%5Blinux%5D-opl-compile-guides-63749/>
# - Bat Rastard@psx-scene and doctorxyz@psx-scene
#   <http://psx-scene.com/forums/f150/2015-linux-mint-vm-creation-opl-compiling-guide-ps2sdk-127047/index3.html#post1169435>
# - and a lot of people around internet :)