DzikuVx

#include "EEPROM.h"

#define EEPROM_SIZE 8

void setup() {
    while (!EEPROM.begin(EEPROM_SIZE)) {
        true;
    }
}

DzikuVx

include <HardwareSerial.h>

HardwareSerial MySerial(1);

void setup() {
    MySerial.begin(9600, SERIAL_8N1, 16, 17);
}

void loop() {
    while (MySerial.available() > 0) {

DzikuVx

#include <SPI.h>
#include <LoRa.h>

volatile bool doRead = false; // Flag set by callback to perform read process in main loop
volatile int incomingPacketSize;

void setup() {
  Serial.begin(9600);
  while (!Serial);

DzikuVx

#include <GP2Y0A02YK0F.h>

GP2Y0A02YK0F irSensor;
int distance;

void setup()
{
  Serial.begin(9600);
  irSensor.begin(A0);	//	Assign A0 as sensor pin
}

DzikuVx

#include <VirtualWire.h>

uint8_t currentPacket = 0; 

void setup() {
  /*
   * Set TX pin -> Connect FS1000A here
   */
  vw_set_tx_pin(12);
  /*

DzikuVx

#include <VirtualWire.h>

uint8_t counter = 0; 

void setup() {
    /*
     * Set TX pin -> Connect FS1000A here
     */
    vw_set_tx_pin(12);
    /*

DzikuVx

#include <OneWire.h>
#include <DallasTemperature.h>
#include <ESP8266mDNS.h>
#include <ESP8266WiFi.h>

#define ALLOWED_CONNECT_CYCLES 40
#define ALLOWED_READ_CYCLES 80
#define ONE_WIRE_BUS 2  // DS18B20 pin
OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature DS18B20(&oneWire);

DzikuVx

privateScope.loadPidController = new classes.PidController();
    privateScope.loadPidController.setTarget(privateScope.targetLoad);
    privateScope.loadPidController.setOutput(0, 97, 0);
    privateScope.loadPidController.setGains(16, 6, 4);
    privateScope.loadPidController.setItermLimit(0, 90);

DzikuVx

'use strict';

var classes = classes || {};

classes.PidController = function () {

    var self = {},
        privateScope = {};

    /**

DzikuVx

/*
 * PPM generator originally written by David Hasko
 * on https://code.google.com/p/generate-ppm-signal/ 
 */

//////////////////////CONFIGURATION///////////////////////////////
#define CHANNEL_NUMBER 12  //set the number of chanels
#define CHANNEL_DEFAULT_VALUE 1500  //set the default servo value
#define FRAME_LENGTH 22500  //set the PPM frame length in microseconds (1ms = 1000µs)
#define PULSE_LENGTH 300  //set the pulse length