Skip to content

Instantly share code, notes, and snippets.

@pjobson
pjobson / pike_it.md
Last active March 14, 2024 01:56
Asus Pike 2008 IT Mode Cross Flash

Flashing Asus 2008 PIKE to IT Mode

Used on an Asus Z8PE-D18 board with no EFI boot options. These instructions were written using Linux Mint to create the media, most distributions will work with little modification.

The PIKE 2008 is basically a LSI 9220-8i which you can flash with 9211-8i firmware. Flashing to IT mode allows you to have direct access to the disks to use btrfs or zfs or some kind of software RAID instead of the card's RAID.

Get Your SAS Address

There is a sticker on the back of your PIKE card which has 16 digits starting with 5000. Write this address down or take a picture of it. Note I put XXXXXXXXXXXX in this picture as these numbers are unique to the card. If your card does not have this sticker, instructions will be provided below.

@witt3rd
witt3rd / brew-sync.sh
Last active February 25, 2024 12:04 — forked from jpawlowski/brew-sync.sh
Sync Homebrew installations between Macs via Dropbox
#!/bin/bash
# Sync Homebrew installations between Macs via Dropbox
#
BREW="/usr/local/bin/brew"
# first get local settings
echo "Reading local settings ..."
rm -f /tmp/brew-sync.*
@takeshixx
takeshixx / hb-test.py
Last active March 9, 2024 13:37
OpenSSL heartbeat PoC with STARTTLS support.
#!/usr/bin/env python2
"""
Author: takeshix <takeshix@adversec.com>
PoC code for CVE-2014-0160. Original PoC by Jared Stafford (jspenguin@jspenguin.org).
Supportes all versions of TLS and has STARTTLS support for SMTP,POP3,IMAP,FTP and XMPP.
"""
import sys,struct,socket
from argparse import ArgumentParser
@namuol
namuol / INSTALL.md
Last active July 24, 2023 11:53
rage-quit support for bash

rage-quit support for bash

HOW TO INSTALL

Put flip somewhere in your $PATH and chmod a+x it.

Copy fuck into ~/.bashrc.

@Warry
Warry / Article.md
Created December 11, 2012 00:11
How to make faster scroll effects?

How to make faster scroll effects?

  • Avoid too many reflows (the browser to recalculate everything)
  • Use advanced CSS3 for graphic card rendering
  • Precalculate sizes and positions

Beware of reflows

The reflow appens as many times as there are frames per seconds. It recalculate all positions that change in order to diplay them. Basically, when you scroll you execute a function where you move things between two reflows. But there are functions that triggers reflows such as jQuery offset, scroll... So there are two things to take care about when you dynamically change objects in javascript to avoid too many reflows:

@ksafranski
ksafranski / Common-Currency.json
Last active June 12, 2024 16:45
Common Currency Codes in JSON
{
"USD": {
"symbol": "$",
"name": "US Dollar",
"symbol_native": "$",
"decimal_digits": 2,
"rounding": 0,
"code": "USD",
"name_plural": "US dollars"
},