Skip to content

Instantly share code, notes, and snippets.

@JoanTheSpark
Created November 27, 2015 08:54
Show Gist options
  • Save JoanTheSpark/e3fab5a8af44f7f8779c to your computer and use it in GitHub Desktop.
Save JoanTheSpark/e3fab5a8af44f7f8779c to your computer and use it in GitHub Desktop.
v2 with spin direction and increasing amount of segments per turn for smoother result in outer circles
import sys, os
import shutil
import math
import itertools
from copy import deepcopy
# 0 1 2 3 4 5 6
LIST_elmt = [" ("," (start ",") (end ",") "," (layer ",") ","))"]
#LIST_elmt = [" (gr_line (start 131.571908 182.314571) (end 112.874456 120.68499) (angle 90) (layer Dwgs.User) (width 0.1))"]
#LIST_elmt = [" (segment (start 118.7 106.7) (end 119.4 106.7) (width 0.25) (layer B.Cu) (net 0))"]
DICT_elmt = {"seg" : ["segment", "(width ", "(net "],
"arc" : ["gr_arc", "(angle ", "(width "],
"lne" : ["gr_line", "(angle ", "(width "],
}
DICT_lyr = { "dwg" : "Dwgs.User",
"cmt" : "Cmts.User",
"cut" : "Edge.Cuts",
"fcu" : "F.Cu",
"bcu" : "B.Cu",
}
def FNC_string (element,
STR_start, #1
STR_end, #2
Angle, #4
layer, #5
width,
):
STR_line = ""
"""
0 1 2 3 4 5
LIST_elmt = [" ("," (start ",") (end ",") "," (layer ",") (width ","))"]
"""
for i in range(len(LIST_elmt)):
STR_line += LIST_elmt[i]
if i == 0:
STR_line += DICT_elmt[element][0]
if i == 1:
STR_line += STR_start
if i == 2:
STR_line += STR_end
if i == 3:
if element == "seg":
STR_line += DICT_elmt[element][1]
STR_angle = "{:.1f}".format(width)
else:
STR_line += DICT_elmt[element][1]
if element == "lne":
STR_angle = "90"
else:
STR_angle = str(Angle)
STR_line += STR_angle + ")"
if i == 4:
STR_line += DICT_lyr[layer]
if i == 5:
if element == "seg":
STR_line += DICT_elmt[element][2]
STR_line += str(Angle)
else:
STR_line += DICT_elmt[element][2]
STR_line += "{:.2f}".format(width)
STR_line += "\n"
return STR_line
def FNC_polygon (element,
STR_start, #1
STR_end, #2
Angle, #4
layer, #5
width,
):
STR_line = ""
"""
0 1 2 3 4 5
LIST_elmt = [" ("," (start ",") (end ",") "," (layer ",") (width ","))"]
"""
for i in range(len(LIST_elmt)):
STR_line += LIST_elmt[i]
if i == 0:
STR_line += DICT_elmt[element][0]
if i == 1:
STR_line += STR_start
if i == 2:
STR_line += STR_end
if i == 3:
if element == "seg":
STR_line += DICT_elmt[element][1]
STR_angle = "{:.1f}".format(width)
else:
STR_line += DICT_elmt[element][1]
if element == "lne":
STR_angle = "90"
else:
STR_angle = str(Angle)
STR_line += STR_angle + ")"
if i == 4:
STR_line += DICT_lyr[layer]
if i == 5:
if element == "seg":
STR_line += DICT_elmt[element][2]
STR_line += str(Angle)
else:
STR_line += DICT_elmt[element][2]
STR_line += "{:.2f}".format(width)
STR_line += "\n"
return STR_line
def FNC_spiral (cntr, # (x,y)
radius,
segs,
startangle,
tw, # track width
td, # track distance
turns,
spin, # cw or ccw, +1 or -1
layer,
net,
):
STR_data = ""
baseX = cntr[0]
baseY = cntr[1]
for j in range(turns):
segs += 4.0
segangle = 360.0 / segs
segradius = td / segs
for i in range(int(segs)):
# central rings for HV and SNS
startX = baseX + (radius + segradius * i + td * (j+1)) * math.sin(math.radians(segangle*spin*i + startangle))
startY = baseY + (radius + segradius * i + td * (j+1)) * math.cos(math.radians(segangle*spin*i + startangle))
endX = baseX + (radius + segradius * (i + 1.0) + td * (j+1)) * math.sin(math.radians(segangle*spin*(i + 1.0) + startangle))
endY = baseY + (radius + segradius * (i + 1.0) + td * (j+1)) * math.cos(math.radians(segangle*spin*(i + 1.0) + startangle))
STR_data += FNC_string ("seg", #type of line
"{:.6f}".format(startX) + " " + "{:.6f}".format(startY), # start point
"{:.6f}".format(endX) + " " + "{:.6f}".format(endY), # end point
net, # angle or net value
layer, # layer on pcb
tw, # track width
)
return STR_data
if __name__ == '__main__':
Center = [115.0,105.0] # x/y coordinates of the centre of the pcb sheet
Radius = 0.5 # start radius in mm
Sides = 20.0
StartAngle = 0.0 # degrees
TrackWidth = 0.4
TrackDistance = 0.6
Turns = 8
Spin = -1 # ccw = +1, cw = -1
Layer = "fcu"
Net = "1"
print FNC_spiral (Center,
Radius,
Sides,
StartAngle,
TrackWidth,
TrackDistance,
Turns,
Spin,
Layer,
Net,
)
@miprochip
Copy link

Está genial el código y muy útil!. ¡Gracias!.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment