aloncarmel

function setWeatherIcon(condid) {

  switch(condid) {
    case '0': var icon  = '<i class="wi-tornado"></i>';
    break;
    case '1': var icon  = '<i class="wi-storm-showers"></i>';
    break;
    case '2': var icon  = '<i class="wi-tornado"></i>';
    break;
    case '3': var icon  = '<i class="wi-thunderstorm"></i>';

wenzhixin

# install openjdk
sudo apt-get install openjdk-7-jdk

# download android sdk
wget http://dl.google.com/android/android-sdk_r24.2-linux.tgz

tar -xvf android-sdk_r24.2-linux.tgz
cd android-sdk-linux/tools

# install all sdk packages

mtauraso

Xcodebuild flag reference for CI:

Required flags:

-project OR -workspace

What xcode project/workspace file we're using. If you specify a project on the command-line and that project has an associated workspace, the project is still aware of its existence within the workspace. As an example, worspace level schemes will be available to xcodebuild even if you specify a project on the command line.

-scheme

Specify the scheme to use for build. Schemes specify multiple build/test targets along with environment args and command line parameters. Schemes must be marked "shared" in the xcode UI in order to be available to xcodebuild. For any particular build/test action there is a default configuration when you use a scheme from the Xcode UI.

Ambroos

USE AT OWN RISK

This was only tested on a 'partial' SentinelOne installation on the High Sierra beta, where SentinelOne was never allowed to enable it's kernel extension. (Some things failed while I was messing around with OS betas.)

This script is most likely outdated.

A lot happens in 2+ years, at this point there's a good chance this script will do more harm than good. Read the comments before using!

cliftonc

This is the setup I am using to publish events for my Brink Flair 300 heat recovery unit. I have a Raspberry Pi 3, with an RS485>USB, connected to the 2 & 3 pin of the X15 input of the HRU. The flow in Node-Red talks locally to the device via modbus, and then connects to an mqtt server that is used for further connection to Home Assistant, this appears to be the most robust solution.

I used this USB stick: Rpi RS485 USB, but I think any of them will work. You do not need to buy the super expensive 'digital adapter' and the app, and with this setup you also do not need the super expensive RF bridge and connectors (though will likely want some physical alternative to this setup to turn it on / off if needed).

It currently provides temperature, set fan speed, actual fan speed, binary sensors for max, medium

hnykda

- alias: "Set ventilation Mode Selector"
  trigger:
    platform: mqtt
    topic: "ventilation/mode"
    # entity_id: input_select.ventilation_mode
  action:
    service: input_select.select_option
    target:
      entity_id: input_select.ventilation_mode
    data: