Skip to content

Instantly share code, notes, and snippets.

@Keridos
Created December 13, 2022 00:28
Show Gist options
  • Save Keridos/1a2f51bd57b60b251204a9a8ee5da88e to your computer and use it in GitHub Desktop.
Save Keridos/1a2f51bd57b60b251204a9a8ee5da88e to your computer and use it in GitHub Desktop.
DDR Version V1.26
REGFB: 0x00000031, 0x00000031
In
589MHz
DDR3
Col=10 Bank=8 Row=15 Size=512MB
msch:1
Returning to boot ROM...
INFO: Preloader serial: 0
NOTICE: BL31: v1.3(release):3a579d3
NOTICE: BL31: Built : 09:09:17, Jan 29 2019
INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x600000
INFO: SPSR = 0x3c9
U-Boot 2017.09-02389-gc93a0fc709 (May 24 2021 - 01:09:26 +0000), Build: jenkins-linux-build-release-590
Model: Radxa ROCK Pi S
PreSerial: 0
DRAM: 510 MiB
Relocation Offset is: 1f917000
vdd_core 1044000 uV
vdd-core init 1044000 uV
MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1
Using default environment
In: serial@ff0c0000
Out: serial@ff0c0000
Err: serial@ff0c0000
Model: Radxa ROCK Pi S
Bootdev(atags): mmc 0
PartType: EFI
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
get part misc fail -1
boot mode: None
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
apll 816000 KHz
dpll 1300000 KHz
vpll0 1179647 KHz
vpll1 903167 KHz
aclk_bus 185714 KHz
hclk_bus 100000 KHz
pclk_bus 100000 KHz
aclk_peri 185714 KHz
hclk_peri 100000 KHz
pclk_peri 100000 KHz
hclk_audio 98303 KHz
pclk_audio 98303 KHz
Net: eth0: ethernet@ff4e0000
Hit key to stop autoboot('CTRL+C'): 0
starting USB...
USB0: Core Release: 3.10a
USB1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
2641 bytes read in 2 ms (1.3 MiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0
reading /uEnv.txt
317 bytes read in 1 ms (309.6 KiB/s)
reading /initrd.img-4.4.143-65-rockchip-g58431d38f8f3
6068739 bytes read in 260 ms (22.3 MiB/s)
reading /vmlinuz-4.4.143-65-rockchip-g58431d38f8f3
10663944 bytes read in 456 ms (22.3 MiB/s)
reading /dtbs/4.4.143-65-rockchip-g58431d38f8f3/rockchip/rk3308-rock-pi-s.dtb
63554 bytes read in 8 ms (7.6 MiB/s)
reading /dtbs/4.4.143-65-rockchip-g58431d38f8f3/rockchip/overlay/rk3308-uart0.dtbo
382 bytes read in 5 ms (74.2 KiB/s)
Applying kernel provided DT overlay rk3308-uart0.dtbo
reading /dtbs/4.4.143-65-rockchip-g58431d38f8f3/rockchip/overlay/rockchip-fixup.scr
1814 bytes read in 6 ms (294.9 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 05000000
initrdsize = 0x5c9a03
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
reserving fdt memory region: addr=1f00000 size=75000
Loading Ramdisk to 1ef3c000, end 1f505a03 ... OK
Loading Device Tree to 000000001eec4000, end 000000001ef3bfff ... OK
Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000)
Starting kernel ...
WARNING: suspend_mode_handler: Not support call: 0x4
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.143-65-rockchip-g58431d38f8f3 (root@ffe6d6b57a26) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revisi
on d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Sat Aug 14 09:31:07 UTC 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd042]
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128520
[ 0.000000] Kernel command line: initrd=initrd.img-4.4.143-65-rockchip-g58431d38f8f3 root=UUID=2a975457-7408-4fda-bd37-22b8d2df5b6f ro
otwait rw rootfstype=ext4 console=tty1 console=ttyS0,1500000n8 panic=10 consoleblank=0 loglevel=7
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] software IO TLB [mem 0x19ec4000-0x1dec4000] (64MB) mapped at [ffffffc019ec4000-ffffffc01dec3fff]
[ 0.000000] Memory: 429212K/522240K available (6910K kernel code, 558K rwdata, 2492K rodata, 384K init, 522K bss, 93028K reserved, 0K
cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff80089c0000 - 0xffffff8008a20000 ( 384 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008740000 ( 6912 KB)
[ 0.000000] .rodata : 0xffffff8008740000 - 0xffffff80089c0000 ( 2560 KB)
[ 0.000000] .data : 0xffffff8008a20000 - 0xffffff8008aab808 ( 559 KB)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc020000000 ( 510 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001022] Console: colour dummy device 80x25
[ 0.002536] console [tty1] enabled
[ 0.002590] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002669] pid_max: default: 32768 minimum: 301
[ 0.002789] Security Framework initialized
[ 0.002837] AppArmor: AppArmor disabled by boot time parameter
[ 0.002935] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.002983] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.003822] Initializing cgroup subsys io
[ 0.003881] Initializing cgroup subsys memory
[ 0.003950] Initializing cgroup subsys devices
[ 0.003998] Initializing cgroup subsys freezer
[ 0.004045] Initializing cgroup subsys net_cls
[ 0.004090] Initializing cgroup subsys perf_event
[ 0.004136] Initializing cgroup subsys net_prio
[ 0.004191] Initializing cgroup subsys hugetlb
[ 0.004235] Initializing cgroup subsys pids
[ 0.004607] sched-energy: CPU device node has no sched-energy-costs
[ 0.004659] Invalid sched_group_energy for CPU0
[ 0.004697] CPU0: update cpu_capacity 1024
[ 0.004784] ASID allocator initialised with 65536 entries
[ 0.039873] Detected VIPT I-cache on CPU1
[ 0.039932] Invalid sched_group_energy for CPU1
[ 0.039937] CPU1: update cpu_capacity 1024
[ 0.039943] CPU1: Booted secondary processor [410fd042]
[ 0.051900] Detected VIPT I-cache on CPU2
[ 0.051941] Invalid sched_group_energy for CPU2
[ 0.051945] CPU2: update cpu_capacity 1024
[ 0.051949] CPU2: Booted secondary processor [410fd042]
[ 0.063943] Detected VIPT I-cache on CPU3
[ 0.063981] Invalid sched_group_energy for CPU3
[ 0.063986] CPU3: update cpu_capacity 1024
[ 0.063990] CPU3: Booted secondary processor [410fd042]
[ 0.064070] Brought up 4 CPUs
[ 0.064516] SMP: Total of 4 processors activated.
[ 0.064561] CPU: All CPU(s) started at EL2
[ 0.064749] Invalid sched_group_energy for CPU3
[ 0.064794] Invalid sched_group_energy for Cluster3
[ 0.064834] Invalid sched_group_energy for CPU2
[ 0.064873] Invalid sched_group_energy for Cluster2
[ 0.064913] Invalid sched_group_energy for CPU1
[ 0.064950] Invalid sched_group_energy for Cluster1
[ 0.064987] Invalid sched_group_energy for CPU0
[ 0.065025] Invalid sched_group_energy for Cluster0
[ 0.065693] devtmpfs: initialized
[ 0.083456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.083561] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.084125] pinctrl core: initialized pinctrl subsystem
[ 0.085419] NET: Registered protocol family 16
[ 0.096095] cpuidle: using governor menu
[ 0.096171] Registered FIQ tty driver
[ 0.096522] vdso: 2 pages (1 code @ ffffff8008746000, 1 data @ ffffff8008a24000)
[ 0.096620] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.096889] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.099091] console [pstore-1] enabled
[ 0.099136] pstore: Registered ramoops as persistent store backend
[ 0.099182] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.143822] vcc_1v8: regulator get failed, ret=-517
[ 0.144777] vcc_1v8_codec: regulator get failed, ret=-517
[ 0.145628] vcc_1v8: supplied by vcc_io
[ 0.145744] vcc_1v8_codec: supplied by vcc_io
[ 0.148047] SCSI subsystem initialized
[ 0.148749] usbcore: registered new interface driver usbfs
[ 0.148864] usbcore: registered new interface driver hub
[ 0.149012] usbcore: registered new device driver usb
[ 0.149210] media: Linux media interface: v0.10
[ 0.149300] Linux video capture interface: v2.00
[ 0.149454] pps_core: LinuxPPS API ver. 1 registered
[ 0.149498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.149594] PTP clock support registered
[ 0.150833] Advanced Linux Sound Architecture Drive
[ 0.886870] brian phy in rtl8201f_probe
[ 0.898720] brian phy in rtl8201f_probe
[ 0.901864] libphy: stmmac: probed
[ 0.902251] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active
[ 0.902858] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)
[ 0.904579] Rockchip WiFi SYS interface (V1.00) ...
[ 0.905485] ff400000.usb supply vusb_d not found, using dummy regulator
[ 0.906281] ff400000.usb supply vusb_a not found, using dummy regulator
[ 1.134219] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[ 1.135472] dwc2 ff400000.usb: DWC OTG Controller
[ 1.135966] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
[ 1.136671] dwc2 ff400000.usb: irq 20, io mem 0xff400000
[ 1.137380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.138021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.138774] usb usb1: Product: DWC OTG Controller
[ 1.139228] usb usb1: Manufacturer: Linux 4.4.143-65-rockchip-g58431d38f8f3 dwc2_hsotg
[ 1.139986] usb usb1: SerialNumber: ff400000.usb
[ 1.141251] hub 1-0:1.0: USB hub found
[ 1.141664] hub 1-0:1.0: 1 port detected
[ 1.365646] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER
[ 1.366462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.367087] ehci-platform: EHCI generic platform driver
[ 1.371416] ehci-platform ff440000.usb: EHCI Host Controller
[ 1.372216] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
[ 1.373107] ehci-platform ff440000.usb: irq 21, io mem 0xff440000
[ 1.382201] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
[ 1.382985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.383627] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.384325] usb usb2: Product: EHCI Host Controller
[ 1.384795] usb usb2: Manufacturer: Linux 4.4.143-65-rockchip-g58431d38f8f3 ehci_hcd
[ 1.385537] usb usb2: SerialNumber: ff440000.usb
[ 1.386726] hub 2-0:1.0: USB hub found
[ 1.387137] hub 2-0:1.0: 1 port detected
[ 1.388127] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.388747] ohci-platform: OHCI generic platform driver
[ 1.389628] ohci-platform ff450000.usb: Generic Platform OHCI controller
[ 1.390575] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
[ 1.391466] ohci-platform ff450000.usb: irq 22, io mem 0xff450000
[ 1.450381] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451027] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451726] usb usb3: Product: Generic Platform OHCI controller
[ 1.452287] usb usb3: Manufacturer: Linux 4.4.143-65-rockchip-g58431d38f8f3 ohci_hcd
[ 1.453030] usb usb3: SerialNumber: ff450000.usb
[ 1.454226] hub 3-0:1.0: USB hub found
[ 1.454641] hub 3-0:1.0: 1 port detected
[ 1.457164] i2c /dev entries driver
[ 1.458004] usbcore: registered new interface driver uvcvideo
[ 1.458588] USB Video Class driver (1.1.1)
[ 1.461317] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
[ 1.462484] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
[ 1.464527] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.465363] Bluetooth: Virtual HCI driver ver 1.5
[ 1.466378] cpu cpu0: leakage=19
[ 1.466984] cpu cpu0: Failed to get pvtm
[ 1.468644] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000
[ 1.470868] Synopsys Designware Multimedia Card Interface Driver
[ 1.472622] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.473362] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
[ 1.474010] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
[ 1.474658] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
[ 1.490337] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.507346] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
[ 1.510288] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.511043] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
[ 1.512714] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
[ 1.515352] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[ 1.516352] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
[ 1.516954] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
[ 1.530291] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.547156] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
[ 1.548394] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
[ 1.549375] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.550108] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
[ 1.550858] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
[ 1.551468] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.552454] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
[ 1.553038] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
[ 1.554036] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
[ 1.570307] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.570317] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 1.575132] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.576357] mmc0: new high speed SDHC card at address aaaa
[ 1.577885] mmcblk0: mmc0:aaaa SD32G 29.7 GiB
[ 1.586339] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
[ 1.586367] mmcblk0: p1 p2
[ 1.590287] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.591456] usbcore: registered new interface driver usbhid
[ 1.592000] usbhid: USB HID core driver
[ 1.592539] dwmmc_rockchip ff4a0000.dwmmc: card claims to support voltages below defined range
[ 1.592670] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
[ 1.592971] rockchip-dmc dmc: Failed to get leakage
[ 1.593052] rockchip-dmc dmc: Failed to get pvtm
[ 1.593377] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 1.593384] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 1.593392] rockchip-dmc dmc: don't add devfreq feature
[ 1.595794] rknandc_base v1.1 2017-01-11
[ 1.596036] rksfc_base v1.1 2016-01-08
[ 1.601524] dummy_codec dummy-codec: Unable to get mclk
[ 1.602830] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio
[ 1.603537] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio
[ 1.604243] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
[ 1.604847] rk3308-acodec ff560000.acodec: De-pop as much as possible
[ 1.605589] The acodec version is: a
[ 1.610398] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 1.610953] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 1.612091] mmc2: new high speed SDIO card at address 0001
[ 1.654299] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[ 1.668002] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok
[ 1.670085] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0
[ 1.671810] u32 classifier
[ 1.672108] Netfilter messages via NETLINK v0.30.
[ 1.672628] ip_set: protocol 6
[ 1.673209] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.673733] Initializing XFRM netlink socket
[ 1.675294] NET: Registered protocol family 10
[ 1.677944] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.678296] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0
[ 1.679366] NET: Registered protocol family 17
[ 1.679893] NET: Registered protocol family 15
[ 1.680461] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need
this.
[ 1.683006] Bridge firewalling registered
[ 1.683796] Bluetooth: RFCOMM TTY layer initialized
[ 1.684335] Bluetooth: RFCOMM socket layer initialized
[ 1.684907] Bluetooth: RFCOMM ver 1.11
[ 1.685397] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.686015] Bluetooth: HIDP socket layer initialized
[ 1.686600] 8021q: 802.1Q VLAN Support v1.8
[ 1.687104] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.688432] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.689026] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
[ 1.689746] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.690522] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.691465] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0.
[ 1.693576] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.694125] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.694811] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.696106] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
[ 1.697016] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
[ 1.697954] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
[ 1.698883] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[ 1.699696] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.700335] [BT_RFKILL]: ** disable irq
[ 1.701077] [BT_RFKILL]: bt_default device registered.
[ 1.701815] Key type dns_resolver registered
[ 1.703329] flash vendor_init_thread!
[ 1.703749] flash vendor storage:20170308 ret = -1
[ 1.706222] registered taskstats version 1
[ 1.766255] Key type encrypted registered
[ 1.767762] hctosys: unable to open rtc device (rtc0)
[ 1.783361] ALSA device list:
[ 1.783679] #0: Loopback 1
[ 1.783962] #1: rockchip,rk3308-acodec
[ 1.785060] Freeing unused kernel memory: 384K
Loading, please wait...
Starting version 241
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[ 2.492641] EXT4-fs (mmcblk0p2): recovery complete
[ 2.494818] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 3.226764] systemd[1]: System time before build time, advancing clock.
[ 3.239515] cgroup: cgroup2: unknown option "nsdelegate"
[ 3.256912] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.260952] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 10 (buster)!
[ 3.281452] systemd[1]: Set hostname to <rockpis>.
[ 3.568078] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the lo
cal system does not support BPF/cgroup based firewalling.
[ 3.569663] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firew
alling.)
[ 3.828136] random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy available)
[ 3.834843] random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy available)
[ 3.835824] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 3.838280] random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy available)
[ 3.842617] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 3.850566] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[ 3.851790] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 3.853962] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[ 3.855509] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 3.857504] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[ 3.859057] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary…s File System Automount Point.
[ 3.861331] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[ 3.863246] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.870573] random: systemd: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
[ 3.873112] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 3.882612] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.884026] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 3.886062] random: systemd: uninitialized urandom read (16 bytes read, 55 bits of entropy available)
[ 3.887462] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 3.889693] systemd[1]: Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Encrypted Volumes.
[ 3.900070] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 3.906681] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 3.916252] systemd[1]: Set up automount boot.automount.
[ OK ] Set up automount boot.automount.
[ 3.918930] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 3.937615] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of re…odes for the current kernel...
[ 3.949918] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 3.970383] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 3.980452] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 3.993324] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 4.007141] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.009357] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 4.017026] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[ 4.023913] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 4.030715] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.038752] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 4.047517] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 4.058675] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.067470] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of req… nodes for the current kernel.
[ 4.082085] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.092608] systemd[1]: Started Remount Root and Kernel File Systems.
[ OK ] Started Remount Root and Kernel File Systems.
[ 4.103745] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 4.111476] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 4.115117] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 4.119901] systemd[1]: Started Load Kernel Modules.
[ OK ] Started Load Kernel Modules.
[ 4.132198] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 4.143855] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 4.156153] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 4.164432] systemd[1]: Starting Create System Users...
Starting Create System Users...
[ 4.172513] systemd[1]: Starting Load/Save Random Seed...
Starting Load/Save Random Seed...
[ 4.178402] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 4.199067] systemd[1]: Mounted Kernel Configuration File System.
[ OK ] Mounted Kernel Configuration File System.
[ 4.205818] systemd[1]: Mounted FUSE Control File System.
[ OK ] Mounted FUSE Control File System.
[ 4.216500] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 4.236762] systemd[1]: Started Load/Save Random Seed.
[ OK ] Started Load/Save Random Seed.
[ 4.252261] systemd[1]: Started Create System Users.
[ OK ] Started Create System Users.
[ 4.263741] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 4.280967] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting udev Kernel Device Manager...
[ 4.365195] systemd-journald[210]: Received request to flush runtime journal from PID 1
[ OK ] Started udev Coldplug all Devices.
[ 4.405640] systemd-journald[210]: File /var/log/journal/51ca88764e25434db18b6c0db72b4763/system.journal corrupted or uncleanly shut d
own, renaming and replacing.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Flush Journal to Persistent Storage.
[ 4.730248] vendor storage:20160801 ret = -1
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 5.245695]
[ 5.245880] =======================================================
[ 5.246527] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 5.247120] =======================================================
[ 5.247711] Realtek 8723DS SDIO WiFi driver (Powered by Rockchip,Ver v5.6.5_31752.20181221_COEX20181130-2e2e) init.
[ 5.248673] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 5.249114] [WLAN_RFKILL]: wifi turn on power. -1
[ 5.249587] mmc2:mmc host rescan start!
[ 5.288984] random: nonblocking pool is initialized
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
Starting WPA supplicant...
Starting Network Manager...
Starting Install HCI UART Module...
Starting Login Service...
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
Starting Bluetooth service...
[ OK ] Reached target Sound Card.
Starting Load/Save RF Kill Switch Status...
[ 5.625494] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
[ 5.625822] Bluetooth: HCI UART driver ver 2.2.d448471.20190215-141136
[ 5.625827] Bluetooth: HCI H4 protocol initialized
[ 5.625829] Bluetooth: HCI Realtek H5 protocol initialized
[ 5.625831] rtk_btcoex: rtk_btcoex_init: version: 1.2
[ 5.625832] rtk_btcoex: create workqueue
[ 5.625834] rtk_btcoex: Coex over UDP
[ 5.626384] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[ 5.698296] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
[ 5.698972] [BT_RFKILL]: ENABLE UART_RTS
[ 5.802342] [BT_RFKILL]: DISABLE UART_RTS
[ 5.802852] [BT_RFKILL]: bt turn on power
[ OK ] Started Login Service.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Install HCI UART Module.
[ OK ] Started WPA supplicant.
[ OK ] Started Bluetooth service.
Starting Load RTL8723DS Bluetooth firmware...
[ 6.007827] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
Starting Hostname Service...
[ 6.078373] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
[ 6.079059] [BT_RFKILL]: ENABLE UART_RTS
[ 6.182237] [BT_RFKILL]: DISABLE UART_RTS
[ 6.182699] [BT_RFKILL]: bt turn on power
[ OK ] Started Load RTL8723DS Bluetooth firmware.
[ 6.250230] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ OK ] Started Hostname Service.
[ OK ] Started Network Manager.
[ 6.382384] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[ OK ] Reached target Network.
Starting /etc/rc.local Compatibility...
Starting Rockchip adb...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
Starting Network Manager Script Dispatcher Service...
[ OK ] Started Permit User Sessions.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Network Manager Script Dispatcher Service.
[ 6.681134] file system registered
[ 6.790580] read descriptors
[ 6.790998] read strings
[ OK ] Started OpenBSD Secure Shell server.
[ 6.870473] Bluetooth: h5_open
[ 6.870813] Bluetooth: hci_uart_register_dev
[ 6.880748] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.882791] rtk_btcoex: Open BTCOEX
[ 6.883230] rtk_btcoex: create_udpsocket: connect_port: 30001
[ 6.883854] rtk_btcoex: send msg INVITE_REQ with len:11
[ 6.886507] rtk_btcoex: BTCOEX hci_rev 0xaa7b
[ 6.886959] rtk_btcoex: BTCOEX lmp_subver 0x5645
Starting Authorization Manager...
[ OK ] Reached target Bluetooth.
[ OK ] Started Authorization Manager.
[ 7.786297] dwc2 ff400000.usb: bound driver configfs-gadget
[ OK ] Started Rockchip adb.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 7.992901] dwc2 ff400000.usb: new device is high-speed
[ 8.186373] dwc2 ff400000.usb: new device is high-speed
[ 8.243487] dwc2 ff400000.usb: new address 12
[ 8.299587] configfs-gadget gadget: high-speed config #1: b
[ 8.902418] [WLAN_RFKILL]: get_wifi_addr_vendor: rk_vendor_read wifi mac address failed (-1)
Debian GNU/Linux 10 rockpis ttyS0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment