The deice creates an ad-hoc network that will be named DSP-W115-XXXX
(where XXXX
will be device dependent). When connecting to this network, my Smart Plug had the address 192.168.0.20
, navigating to http://192.168.0.20/
took me to a login page. The credentials for logging in were: username = Admin
, password = pin code printed on device.
After logging in, the device presents a page with some current information about the device:
Firmware Version: 1.00-b11
Date: Nov 17, 2017
Checksum: 0x13A44B58
2.4GHz regulation domain: EU
1,2,3,4,5,6,7,8,9,10,11,12,13
2.4GHz SSID: DSP-W115-BE27
LAN MAC: 18:0F:76:CC:BE:27
2.4GHz WLAN MAC: 18:0F:76:CC:BE:27
I haven't been able to get the device to connect to my network yet, nor have I been abel to turn the smart plug on or off.
I'm trying to use DSP-W115 on "my dlink home app" and not on "mydlink app". On my "dlink home app" the device has been imported during installation but I have the error message: "firmware upgrade is required" - DSP-W115 have firmware 1.02-b04 and I found online firmware DSPW115_A1_FW103b05-agent-b88a.bin but I not find the way to install it. I can access the web page that show the software release but I cannot do nothing. How to upload the new firmware? Any help?