Instructions for CUDA v11.8 and cuDNN 8.9.7 installation on Ubuntu 22.04 for PyTorch 2.1.2

cuda_11.8_installation_on_Ubuntu_22.04

#!/bin/bash

### steps ####
# Verify the system has a cuda-capable gpu
# Download and install the nvidia cuda toolkit and cudnn
# Setup environmental variables
# Verify the installation
###

### to verify your gpu is cuda enable check
lspci | grep -i nvidia

### If you have previous installation remove it first. 
sudo apt-get purge nvidia*
sudo apt remove nvidia-*
sudo rm /etc/apt/sources.list.d/cuda*
sudo apt-get autoremove && sudo apt-get autoclean
sudo rm -rf /usr/local/cuda*

# system update
sudo apt-get update
sudo apt-get upgrade

# install other import packages
sudo apt-get install g++ freeglut3-dev build-essential libx11-dev libxmu-dev libxi-dev libglu1-mesa libglu1-mesa-dev

# first get the PPA repository driver
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt update

# install nvidia driver with dependencies
sudo apt install libnvidia-common-470
sudo apt install libnvidia-gl-470
sudo apt install nvidia-driver-470

 # installing CUDA-11.8
wget https://developer.download.nvidia.com/compute/cuda/repos/wsl-ubuntu/x86_64/cuda-keyring_1.0-1_all.deb
sudo dpkg -i cuda-keyring_1.0-1_all.deb
sudo apt-get update
sudo apt-get -y install cuda

# setup your paths
echo 'export PATH=/usr/local/cuda-11.8/bin:$PATH' >> ~/.bashrc
echo 'export LD_LIBRARY_PATH=/usr/local/cuda-11.8/lib64:$LD_LIBRARY_PATH' >> ~/.bashrc
source ~/.bashrc
sudo ldconfig

# install cuDNN v8.9.7
# First register here: https://developer.nvidia.com/developer-program/signup

CUDNN_TAR_FILE="cudnn-linux-x86_64-8.9.7.29_cuda11-archive.tar.xz"
wget https://developer.nvidia.com/downloads/compute/cudnn/secure/8.9.7/local_installers/11.x/cudnn-linux-x86_64-8.9.7.29_cuda11-archive.tar.xz
tar -xvf ${CUDNN_TAR_FILE}

# copy the following files into the cuda toolkit directory.
sudo cp cudnn-*-archive/include/cudnn*.h /usr/local/cuda/include 
$ sudo cp -P cudnn-*-archive/lib/libcudnn* /usr/local/cuda/lib64 
$ sudo chmod a+r /usr/local/cuda/include/cudnn*.h /usr/local/cuda/lib64/libcudnn*

# Finally, to verify the installation, check
nvidia-smi
nvcc -V

# install Pytorch (an open source machine learning framework)
pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118

What if I want to install cuda 10.0 ? Is the same sequence of instructions? thanx

Unpacking xfonts-base (1:1.0.4+nmu1) ...
Errors were encountered while processing:
/tmp/apt-dpkg-install-0cZNOW/106-libnvidia-compute-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/107-libnvidia-decode-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/108-libnvidia-encode-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/109-libnvidia-fbc1-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/110-libnvidia-gl-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/111-libnvidia-ifr1-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/112-nvidia-compute-utils-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/117-libnvidia-extra-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/118-nvidia-utils-460_460.27.04-0ubuntu1_amd64.deb
/tmp/apt-dpkg-install-0cZNOW/119-libnvidia-cfg1-460_460.27.04-0ubuntu1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

the best tutorial that saves my life!!!!!

Yes, It's the best Tensorflow Installation Guide, I had resolved all my previous issues.

If you run this on shell, tensorflow recognizes gpus?
I ran this shell script, and seemed like there was no problem running it, but tensorflow-gpu still doesn't recognize gpus.
Tensorflow-gpu version is 2.3.0 and this version must also be compatible with cuda 10.1 and cudnn 7.6.

If you run this on shell, tensorflow recognizes gpus?
I ran this shell script, and seemed like there was no problem running it, but tensorflow-gpu still doesn't recognize gpus.
Tensorflow-gpu version is 2.3.0 and this version must also be compatible with cuda 10.1 and cudnn 7.6.

Try this
sudo apt-get install -y --no-install-recommends
cuda-10-1
libcudnn7=7.6.0.64-1+cuda10.1
libcudnn7-dev=7.6.0.64-1+cuda10.1;

sudo apt-get install -y --no-install-recommends
libnvinfer6=6.0.1-1+cuda10.1
libnvinfer-dev=6.0.1-1+cuda10.1
libnvinfer-plugin6=6.0.1-1+cuda10.1;

also as someone above said, cuda 10.1 install some cuda 10.2 components

it works on my pc. Thanks!

can you tell what changes should be done for cuda 11.1 in 18.04 ubuntu system.

Thanks

Was having issues getting the TensorFlow Object Detection API to work without errors. This guide worked for Ubuntu 20.04, CUDA 11.2, CuDNN 8.1.0 and TensorFlow 2.6.

Thanks a lot!

@mnielsen There is extra i in sudo apt install libnividia-gl-470. I think it should be sudo apt install libnvidia-gl-470

@yummyKnight Thanks for your correction.

Can someone tell me is sudo ubuntu-drivers autoinstall the same as three following commands? Do they do the same job?

sudo apt install libnvidia-common-470
sudo apt install libnvidia-gl-470
sudo apt install nvidia-driver-470

After installing this I was getting the following (non-fatal) warning

>>> import tensorflow as tf
>>> print("Num GPUs Available: ", len(tf.config.list_physical_devices('GPU')))
2021-11-24 09:01:58.877869: I tensorflow/stream_executor/cuda/cuda_gpu_executor.cc:937] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero
2021-11-24 09:01:58.899255: I tensorflow/stream_executor/cuda/cuda_gpu_executor.cc:937] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero
2021-11-24 09:01:58.900051: I tensorflow/stream_executor/cuda/cuda_gpu_executor.cc:937] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero
Num GPUs Available:  1

I resolved it by following tensorflow/tensorflow#53184
for a in /sys/bus/pci/devices/*; do echo 0 | sudo tee -a $a/numa_node; done

Thanks for nice repo
I have installed using your instruction. but when type nvidia-smi it shows 11.5. Why, how can I install 11.2?

Works great up till cuDNN, and then I get the following

$ wget https://developer.nvidia.com/compute/machine-learning/cudnn/secure/8.1.1.33/11.2_20210301/cudnn-11.2-linux-x64-v8.1.1.33.tgz
--2022-02-13 13:24:40--  https://developer.nvidia.com/compute/machine-learning/cudnn/secure/8.1.1.33/11.2_20210301/cudnn-11.2-linux-x64-v8.1.1.33.tgz
Resolving developer.nvidia.com (developer.nvidia.com)... 152.195.19.142
Connecting to developer.nvidia.com (developer.nvidia.com)|152.195.19.142|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2022-02-13 13:24:41 ERROR 403: Forbidden.

EDIT: This link worked: wget https://developer.download.nvidia.com/compute/redist/cudnn/v8.1.1/cudnn-11.2-linux-x64-v8.1.1.33.tgz

I want to install CUDA 11.3 or higher version on Ubuntu 18.04 (which is installed using a Virtual Machine). Which instructions should I follow?

Thanks for nice repo I have installed using your instruction. but when type nvidia-smi it shows 11.5. Why, how can I install 11.2?

I had to implement the end of this tutorial:
https://towardsdatascience.com/installing-multiple-cuda-cudnn-versions-in-ubuntu-fcb6aa5194e2

I used his edit of bash so tensorflow (in my case) can choose what cuda toolkit use, and it worked.

Thank you very much @Mahedi-61, much appreciated

RTX 3090 requires driver version of 515 (not 470).

# install nvidia driver with dependencies
sudo apt install libnvidia-common-515
sudo apt install libnvidia-gl-515
sudo apt install nvidia-driver-515

I am wondering whether these work for installing cuda 11.3 on ubuntu 22.04 also?

Will it work for nvidia-server on ubuntu 20.04 server ?

install nvidia driver with dependencies

sudo apt install libnvidia-common-470-server
sudo apt install libnvidia-gl-470-server
sudo apt install nvidia-driver-470-server

Will it work for nvidia-server on ubuntu 20.04 server ?

install nvidia driver with dependencies

sudo apt install libnvidia-common-470-server sudo apt install libnvidia-gl-470-server sudo apt install nvidia-driver-470-server

@saravananpsg It's works for server. I tested. I also changed 470 to 515 to support 3090.

I also had to change the version from 470 to 515 for a 1070 TI.

sudo apt install libnvidia-common-515
sudo apt install libnvidia-gl-515
sudo apt install nvidia-driver-515

After installing, if nvidia-smi gives a kernel/client version mismatch error, reboot.

This helped A LOT! Thanks!

Thank you! It was veeery helpful!

Thank you verry much you just forgotten a star character after cudnn here :
sudo cp -P cuda/include/cudnn*.h /usr/local/cuda-11.3/include

Verry important because else an error can be encountered while compiling for example pytorch "cudnn_version.h" not found.
Regards