Skip to content

Instantly share code, notes, and snippets.

@ObKo

ObKo/ChibiOS-isochronous-demo.patch

Created August 8, 2015 11:47
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save ObKo/6f85089377dfc23c8c0e to your computer and use it in GitHub Desktop.
Save ObKo/6f85089377dfc23c8c0e to your computer and use it in GitHub Desktop.
Download ZIP
Raw
ChibiOS-isochronous-demo.patch
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/chconf.h ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/chconf.h
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/chconf.h 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/chconf.h 2015-07-15 20:18:40.000000000 +0600
@@ -0,0 +1,499 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS TRUE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE TRUE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/halconf.h ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/halconf.h
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/halconf.h 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/halconf.h 2015-08-07 15:09:48.918233945 +0600
@@ -0,0 +1,341 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM TRUE
+#endif
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/main.c ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/main.c
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/main.c 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/main.c 2015-08-07 17:48:44.120004157 +0600
@@ -0,0 +1,611 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+/*
+ * Supported control requests from USB Audio Class
+ */
+#define UAC_REQ_SET_CUR 0x01
+#define UAC_REQ_GET_CUR 0x81
+
+#define UAC_FU_MUTE_CONTROL 0x01
+
+/*
+ * Audio parameters.
+ */
+#define AUDIO_SAMPLING_FREQUENCY 48000U
+#define AUDIO_RESOLUTION 16U
+#define AUDIO_CHANNELS 2U
+#define AUDIO_SAMPLES_PER_FRAME (AUDIO_SAMPLING_FREQUENCY / 1000)
+#define AUDIO_PACKET_SIZE (AUDIO_SAMPLES_PER_FRAME * AUDIO_CHANNELS \
+ * AUDIO_RESOLUTION / 8)
+/*
+ * Endpoints to be used for audio streaming.
+ */
+#define AUDIO_CAPTURE_ENDPOINT 1
+#define AUDIO_PLAYBACK_ENDPOINT 2
+
+/*
+ * USB Device Descriptor (UAC 4.1)
+ */
+static const uint8_t audio_device_descriptor_data[18] = {
+ USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
+ 0x00, /* bDeviceClass (None). */
+ 0x00, /* bDeviceSubClass. */
+ 0x00, /* bDeviceProtocol. */
+ 0x40, /* bMaxPacketSize. */
+ 0x0483, /* idVendor (ST). */
+ 0x5740, /* idProduct. */
+ 0x0001, /* bcdDevice. */
+ 1, /* iManufacturer. */
+ 2, /* iProduct. */
+ 3, /* iSerialNumber. */
+ 1) /* bNumConfigurations. */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor audio_device_descriptor = {
+ sizeof audio_device_descriptor_data,
+ audio_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a UAC.*/
+static const uint8_t audio_configuration_descriptor_data[187] = {
+ /* Configuration Descriptor. (UAC 4.2) */
+ USB_DESC_CONFIGURATION(187, /* wTotalLength. */
+ 0x03, /* bNumInterfaces. */
+ 0x01, /* bConfigurationValue. */
+ 0, /* iConfiguration. */
+ 0xC0, /* bmAttributes (self powered). */
+ 50), /* bMaxPower (100mA). */
+ /* Standard Audio Control Interface Descriptor (UAC 4.3.1) */
+ USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x00, /* bNumEndpoints. */
+ 0x01, /* bInterfaceClass (AUDIO). */
+ 0x01, /* bInterfaceSubClass
+ (AUDIO_CONTROL). */
+ 0x00, /* bInterfaceProtocol (none). */
+ 0), /* iInterface. */
+ /* Class-specific AC Interface Descriptor (UAC 4.3.2) */
+ USB_DESC_BYTE (10), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Header). */
+ USB_DESC_BCD (0x0100), /* bcdADC. */
+ USB_DESC_WORD (65), /* wTotalLength. */
+ USB_DESC_BYTE (0x02), /* bInCollection (2 streaming
+ interfaces). */
+ USB_DESC_BYTE (0x01), /* baInterfaceNr (interface 1
+ is stream). */
+ USB_DESC_BYTE (0x02), /* baInterfaceNr (interface 2
+ is stream). */
+ /* Input Terminal Descriptor (UAC 4.3.2.1) */
+ USB_DESC_BYTE (12), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType. */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Input
+ Terminal). */
+ USB_DESC_BYTE (0x01), /* bTerminalID. */
+ USB_DESC_WORD (0x0603), /* wTerminalType (Line In). */
+ USB_DESC_BYTE (0x00), /* bAssocTerminal (none). */
+ USB_DESC_BYTE (2), /* bNrChannels (2). */
+ USB_DESC_WORD (0x0003), /* wChannelConfig (left, right). */
+ USB_DESC_BYTE (0x00), /* iChannelNames (none). */
+ USB_DESC_BYTE (0x00), /* iTerminal (none). */
+ /* Input Terminal Descriptor (UAC 4.3.2.1) */
+ USB_DESC_BYTE (12), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType. */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Input
+ Terminal). */
+ USB_DESC_BYTE (0x02), /* bTerminalID. */
+ USB_DESC_WORD (0x0101), /* wTerminalType (USB streaming). */
+ USB_DESC_BYTE (0x00), /* bAssocTerminal (none). */
+ USB_DESC_BYTE (2), /* bNrChannels (2). */
+ USB_DESC_WORD (0x0003), /* wChannelConfig (left, right). */
+ USB_DESC_BYTE (0x00), /* iChannelNames (none). */
+ USB_DESC_BYTE (0x00), /* iTerminal (none). */
+ /* Feature Unit Descriptor (UAC 4.3.2.5) */
+ USB_DESC_BYTE (13), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType. */
+ USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Feature
+ Unit). */
+ USB_DESC_BYTE (0x03), /* bUnitID. */
+ USB_DESC_BYTE (0x02), /* bSourceID (input terminal 1). */
+ USB_DESC_BYTE (2), /* bControlSize (2). */
+ USB_DESC_WORD (0x0001), /* Master controls. */
+ USB_DESC_WORD (0x0000), /* Channel 0 controls */
+ USB_DESC_WORD (0x0000), /* Channel 1 controls */
+ USB_DESC_BYTE (0x00), /* iFeature (none) */
+ /* Output Terminal Descriptor (UAC 4.3.2.2) */
+ USB_DESC_BYTE (9), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType. */
+ USB_DESC_BYTE (0x03), /* bDescriptorSubtype (Output
+ Terminal). */
+ USB_DESC_BYTE (0x04), /* bTerminalID. */
+ USB_DESC_WORD (0x0101), /* wTerminalType (USB streaming). */
+ USB_DESC_BYTE (0x00), /* bAssocTerminal (none). */
+ USB_DESC_BYTE (0x01), /* bSourceID (Input terminal 1). */
+ USB_DESC_BYTE (0x00), /* iTerminal (none). */
+ /* Output Terminal Descriptor (UAC 4.3.2.2) */
+ USB_DESC_BYTE (9), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType. */
+ USB_DESC_BYTE (0x03), /* bDescriptorSubtype (Output
+ Terminal). */
+ USB_DESC_BYTE (0x05), /* bTerminalID. */
+ USB_DESC_WORD (0x0302), /* wTerminalType (Headphones). */
+ USB_DESC_BYTE (0x00), /* bAssocTerminal (none). */
+ USB_DESC_BYTE (0x03), /* bSourceID (feature unit 3). */
+ USB_DESC_BYTE (0x00), /* iTerminal (none). */
+ /* Standard Audio Streaming Interface Descriptor (empty) (UAC 4.5.1) */
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x00, /* bNumEndpoints. */
+ 0x01, /* bInterfaceClass (AUDIO). */
+ 0x02, /* bInterfaceSubClass
+ (AUDIO_STREAMING). */
+ 0x00, /* bInterfaceProtocol (none). */
+ 0), /* iInterface. */
+ /* Standard Audio Streaming Interface Descriptor (functional) (UAC 4.5.1) */
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x01, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x01, /* bInterfaceClass (AUDIO). */
+ 0x02, /* bInterfaceSubClass
+ (AUDIO_STREAMING). */
+ 0x00, /* bInterfaceProtocol (none). */
+ 0), /* iInterface. */
+ /* Class-specific AS Interface Descriptor (UAC 4.5.2) */
+ USB_DESC_BYTE (7), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (General). */
+ USB_DESC_BYTE (0x04), /* bTerminalLink (terminal 4). */
+ USB_DESC_BYTE (0x00), /* bDelay (none). */
+ USB_DESC_WORD (0x0001), /* wFormatTag (PCM format). */
+ /* Class-Specific AS Format Type Descriptor (UAC 4.5.3) */
+ USB_DESC_BYTE (11), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Format). */
+ USB_DESC_BYTE (0x01), /* bFormatType (Type I). */
+ USB_DESC_BYTE (0x02), /* bNrChannels (2). */
+ USB_DESC_BYTE (0x02), /* bSubFrameSize (2). */
+ USB_DESC_BYTE (AUDIO_RESOLUTION), /* bBitResolution. */
+ USB_DESC_BYTE (0x01), /* bSamFreqType (Type I). */
+ USB_DESC_BYTE (AUDIO_SAMPLING_FREQUENCY & 0xFF),
+ USB_DESC_BYTE ((AUDIO_SAMPLING_FREQUENCY >> 8) & 0xFF),
+ USB_DESC_BYTE ((AUDIO_SAMPLING_FREQUENCY >> 16) & 0xFF),
+ /* Standard AS Isochronous Audio Data Endpoint Descriptor (UAC 4.6.1.1) */
+ USB_DESC_BYTE (9), /* bLength (9). */
+ USB_DESC_BYTE (0x05), /* bDescriptorType (Endpoint). */
+ USB_DESC_BYTE (0x81), /* bEndpointAddress (EP1 IN) */
+ USB_DESC_BYTE (0x05), /* bmAttributes (asynchronous). */
+ USB_DESC_WORD (AUDIO_PACKET_SIZE), /* wMaxPacketSize */
+ USB_DESC_BYTE (0x01), /* bInterval (1 ms). */
+ USB_DESC_BYTE (0x00), /* bRefresh (0). */
+ USB_DESC_BYTE (0x00), /* bSynchAddress (none). */
+ /* C-S AS Isochronous Audio Data Endpoint Descriptor (UAC 4.6.1.2) */
+ USB_DESC_BYTE (7), /* bLength. */
+ USB_DESC_BYTE (0x25), /* bDescriptorType (CS_ENDPOINT). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (General). */
+ USB_DESC_BYTE (0x00), /* bmAttributes (none). */
+ USB_DESC_BYTE (0x02), /* bLockDelayUnits (PCM Samples). */
+ USB_DESC_WORD (0x0000), /* bLockDelay (0). */
+ /* Standard AS Interface Descriptor (empty) (UAC 4.5.1) */
+ USB_DESC_INTERFACE (0x02, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x00, /* bNumEndpoints. */
+ 0x01, /* bInterfaceClass (AUDIO). */
+ 0x02, /* bInterfaceSubClass
+ (AUDIO_STREAMING). */
+ 0x00, /* bInterfaceProtocol (none). */
+ 0), /* iInterface. */
+ /* Standard AS Interface Descriptor (functional) (UAC 4.5.1) */
+ USB_DESC_INTERFACE (0x02, /* bInterfaceNumber. */
+ 0x01, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x01, /* bInterfaceClass (AUDIO). */
+ 0x02, /* bInterfaceSubClass
+ (AUDIO_STREAMING). */
+ 0x00, /* bInterfaceProtocol (none). */
+ 0), /* iInterface. */
+ /* Class-specific AS Interface Descriptor (UAC 4.5.2) */
+ USB_DESC_BYTE (7), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (General). */
+ USB_DESC_BYTE (0x02), /* bTerminalLink (terminal 2). */
+ USB_DESC_BYTE (0x00), /* bDelay (none). */
+ USB_DESC_WORD (0x0001), /* wFormatTag (PCM format). */
+ /* Class-Specific AS Format Type Descriptor (UAC 4.5.3) */
+ USB_DESC_BYTE (11), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Format). */
+ USB_DESC_BYTE (0x01), /* bFormatType (Type I). */
+ USB_DESC_BYTE (0x02), /* bNrChannels (2). */
+ USB_DESC_BYTE (0x02), /* bSubFrameSize (2). */
+ USB_DESC_BYTE (AUDIO_RESOLUTION), /* bBitResolution. */
+ USB_DESC_BYTE (0x01), /* bSamFreqType (Type I). */
+ USB_DESC_BYTE (AUDIO_SAMPLING_FREQUENCY & 0xFF),
+ USB_DESC_BYTE ((AUDIO_SAMPLING_FREQUENCY >> 8) & 0xFF),
+ USB_DESC_BYTE ((AUDIO_SAMPLING_FREQUENCY >> 16) & 0xFF),
+ /* Standard AS Isochronous Audio Data Endpoint Descriptor (UAC 4.6.1.1) */
+ USB_DESC_BYTE (9), /* bLength (9). */
+ USB_DESC_BYTE (0x05), /* bDescriptorType (Endpoint). */
+ USB_DESC_BYTE (0x02), /* bEndpointAddress (EP2 OUT) */
+ USB_DESC_BYTE (0x01), /* bmAttributes (synchronous). */
+ USB_DESC_WORD (AUDIO_PACKET_SIZE), /* wMaxPacketSize */
+ USB_DESC_BYTE (0x01), /* bInterval (1 ms). */
+ USB_DESC_BYTE (0x00), /* bRefresh (0). */
+ USB_DESC_BYTE (0x00), /* bSynchAddress (none). */
+ /* C-S AS Isochronous Audio Data Endpoint Descriptor (UAC 4.6.1.2) */
+ USB_DESC_BYTE (7), /* bLength. */
+ USB_DESC_BYTE (0x25), /* bDescriptorType (CS_ENDPOINT). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (General). */
+ USB_DESC_BYTE (0x00), /* bmAttributes (none). */
+ USB_DESC_BYTE (0x02), /* bLockDelayUnits (PCM Samples). */
+ USB_DESC_WORD (0x0000), /* bLockDelay (0). */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor audio_configuration_descriptor = {
+ sizeof audio_configuration_descriptor_data,
+ audio_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t audio_string0[] = {
+ USB_DESC_BYTE(4), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t audio_string1[] = {
+ USB_DESC_BYTE(38), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+ 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+ 'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t audio_string2[] = {
+ USB_DESC_BYTE(56), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+ 'R', 0, 'T', 0, ' ', 0, 'U', 0, 'S', 0, 'B', 0, ' ', 0, 'A', 0,
+ 'u', 0, 'd', 0, 'i', 0, 'o', 0, ' ', 0, 'D', 0, 'e', 0, 'v', 0,
+ 'i', 0, 'c', 0, 'e', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t audio_string3[] = {
+ USB_DESC_BYTE(8), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ '0' + CH_KERNEL_MAJOR, 0,
+ '0' + CH_KERNEL_MINOR, 0,
+ '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor audio_strings[] = {
+ {sizeof audio_string0, audio_string0},
+ {sizeof audio_string1, audio_string1},
+ {sizeof audio_string2, audio_string2},
+ {sizeof audio_string3, audio_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+ uint8_t dtype,
+ uint8_t dindex,
+ uint16_t lang) {
+
+ (void)usbp;
+ (void)lang;
+ switch (dtype) {
+ case USB_DESCRIPTOR_DEVICE:
+ return &audio_device_descriptor;
+ case USB_DESCRIPTOR_CONFIGURATION:
+ return &audio_configuration_descriptor;
+ case USB_DESCRIPTOR_STRING:
+ if (dindex < 4)
+ return &audio_strings[dindex];
+ }
+ return NULL;
+}
+
+/*
+ * Echo buffer.
+ */
+static uint16_t testData[AUDIO_SAMPLES_PER_FRAME * AUDIO_CHANNELS];
+/*
+ * Device states.
+ */
+static uint8_t muted = 0;
+static bool capture = false;
+static bool playback = false;
+
+/*
+ * Data transmitted (or dropped) in current frame.
+ */
+void audio_transmitted(USBDriver *usbp, usbep_t ep) {
+ if (capture) {
+ usbPrepareTransmit(usbp, ep, (uint8_t*)testData, AUDIO_PACKET_SIZE);
+ chSysLockFromISR();
+ usbStartTransmitI(usbp, ep);
+ chSysUnlockFromISR();
+ }
+}
+
+/*
+ * Data received (or not) in current frame.
+ */
+void audio_received(USBDriver *usbp, usbep_t ep) {
+ if (playback) {
+ usbPrepareReceive(usbp, ep, (uint8_t*)testData, AUDIO_PACKET_SIZE);
+ chSysLockFromISR();
+ usbStartReceiveI(usbp, ep);
+ chSysUnlockFromISR();
+ }
+}
+
+/*
+ * IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/*
+ * EP1 initialization structure (IN).
+ */
+static const USBEndpointConfig ep1config = {
+ USB_EP_MODE_TYPE_ISOC,
+ NULL,
+ audio_transmitted,
+ NULL,
+ AUDIO_PACKET_SIZE,
+ 0x0000,
+ &ep1instate,
+ NULL,
+ 1,
+ NULL
+};
+
+/*
+ * OUT EP1 state.
+ */
+static USBOutEndpointState ep2outstate;
+
+/*
+ * EP1 initialization structure (OUT).
+ */
+static const USBEndpointConfig ep2config = {
+ USB_EP_MODE_TYPE_ISOC,
+ NULL,
+ NULL,
+ audio_received,
+ 0x0000,
+ AUDIO_PACKET_SIZE,
+ NULL,
+ &ep2outstate,
+ 0,
+ NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+
+ switch (event) {
+ case USB_EVENT_RESET:
+ return;
+ case USB_EVENT_ADDRESS:
+ return;
+ case USB_EVENT_CONFIGURED:
+ chSysLockFromISR();
+ /* Enables the endpoints specified into the configuration.
+ Note, this callback is invoked from an ISR so I-Class functions
+ must be used.*/
+ usbInitEndpointI(usbp, AUDIO_CAPTURE_ENDPOINT, &ep1config);
+ usbInitEndpointI(usbp, AUDIO_PLAYBACK_ENDPOINT, &ep2config);
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_SUSPEND:
+ return;
+ case USB_EVENT_WAKEUP:
+ return;
+ case USB_EVENT_STALLED:
+ return;
+ }
+ return;
+}
+
+/*
+ * Handles UAC-specific controls.
+ */
+bool audio_control(USBDriver *usbp, uint8_t iface, uint8_t entity, uint8_t req,
+ uint16_t wValue, uint16_t length) {
+ /* Only requests to audio control iface are supported */
+ if (iface == 0) {
+ /* Feature unit */
+ if (entity == 3) {
+ uint8_t ctrl = (wValue & 0xFF00) >> 8;
+ switch(req) {
+ case UAC_REQ_GET_CUR:
+ if(ctrl == UAC_FU_MUTE_CONTROL) {
+ usbSetupTransfer(usbp, &muted, length, NULL);
+ return true;
+ }
+ case UAC_REQ_SET_CUR:
+ if(ctrl == UAC_FU_MUTE_CONTROL) {
+ usbReadSetup(usbp, 0, &muted);
+ usbSetupTransfer(usbp, &muted, length, NULL);
+ return true;
+ }
+ default:
+ return false;
+ }
+ }
+ }
+ return false;
+}
+
+/*
+ * Handles SETUP requests
+ */
+bool audio_requests_hook(USBDriver *usbp) {
+ if ((usbp->setup[0] & (USB_RTYPE_TYPE_MASK | USB_RTYPE_RECIPIENT_MASK)) ==
+ (USB_RTYPE_TYPE_STD | USB_RTYPE_RECIPIENT_INTERFACE)) {
+ if (usbp->setup[1] == USB_REQ_SET_INTERFACE) {
+ /* Switch between empty interface and normal one. */
+ if (((usbp->setup[5] << 8) | usbp->setup[4]) == 1) {
+ if(((usbp->setup[3] << 8) | usbp->setup[2]) == 1) {
+ capture = true;
+ usbPrepareTransmit(usbp, AUDIO_CAPTURE_ENDPOINT, (uint8_t*)testData,
+ AUDIO_PACKET_SIZE);
+ chSysLockFromISR();
+ usbStartTransmitI(usbp, AUDIO_CAPTURE_ENDPOINT);
+ chSysUnlockFromISR();
+ } else {
+ capture = false;
+ }
+ usbSetupTransfer(usbp, NULL, 0, NULL);
+ return true;
+ } else if (((usbp->setup[5] << 8) | usbp->setup[4]) == 2) {
+ if(((usbp->setup[3] << 8) | usbp->setup[2]) == 1) {
+ playback = true;
+ usbPrepareReceive(usbp, AUDIO_PLAYBACK_ENDPOINT, (uint8_t*)testData,
+ AUDIO_PACKET_SIZE);
+ chSysLockFromISR();
+ usbStartReceiveI(usbp, AUDIO_PLAYBACK_ENDPOINT);
+ chSysUnlockFromISR();
+ } else {
+ playback = false;
+ }
+ usbSetupTransfer(usbp, NULL, 0, NULL);
+ return true;
+ }
+ }
+ return false;
+ }
+ else if ((usbp->setup[0] & USB_RTYPE_TYPE_MASK) == USB_RTYPE_TYPE_CLASS) {
+ switch(usbp->setup[0] & USB_RTYPE_RECIPIENT_MASK) {
+ case USB_RTYPE_RECIPIENT_INTERFACE:
+ return audio_control(usbp, usbp->setup[4], usbp->setup[5], usbp->setup[1],
+ (usbp->setup[3] << 8) | (usbp->setup[2]),
+ (usbp->setup[7] << 8) | (usbp->setup[6]));
+ case USB_RTYPE_RECIPIENT_ENDPOINT:
+ default:
+ return false;
+ }
+ }
+ return false;
+}
+
+/*
+ * USB driver configuration.
+ */
+static const USBConfig usbcfg = {
+ usb_event,
+ get_descriptor,
+ audio_requests_hook,
+ NULL,
+};
+
+/*
+ * LED switching thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+ chRegSetThreadName("switcher");
+ while (true) {
+ if (USBD1.state == USB_ACTIVE)
+ palSetPad(GPIOD, GPIOD_LED3);
+ else
+ palClearPad(GPIOD, GPIOD_LED3);
+
+ if (capture)
+ palSetPad(GPIOD, GPIOD_LED4);
+ else
+ palClearPad(GPIOD, GPIOD_LED4);
+
+ if (playback)
+ palSetPad(GPIOD, GPIOD_LED5);
+ else
+ palClearPad(GPIOD, GPIOD_LED5);
+
+ if (muted)
+ palSetPad(GPIOD, GPIOD_LED6);
+ else
+ palClearPad(GPIOD, GPIOD_LED6);
+
+ chThdSleepMilliseconds(250);
+ }
+}
+/*
+ * Application entry point.
+ */
+int main(void) {
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Activates the USB driver and then the USB bus pull-up on D+.
+ * Note, a delay is inserted in order to not have to disconnect the cable
+ * after a reset.
+ */
+ usbDisconnectBus(&USBD1);
+ chThdSleepMilliseconds(1500);
+ usbStart(&USBD1, &usbcfg);
+ usbConnectBus(&USBD1);
+
+ /*
+ * Creates the switcher thread.
+ */
+ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing.
+ */
+ for(;;) {
+ chThdSleepMilliseconds(1000);
+ }
+}
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/Makefile ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/Makefile
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/Makefile 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/Makefile 2015-08-07 15:57:33.518130744 +0600
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(TESTSRC) \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/mcuconf.h ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/mcuconf.h
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/mcuconf.h 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/mcuconf.h 2015-08-07 15:17:27.600612432 +0600
@@ -0,0 +1,337 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 8
+#define STM32_PLLN_VALUE 336
+#define STM32_PLLP_VALUE 2
+#define STM32_PLLQ_VALUE 7
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV4
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_PLLI2S
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_USE_CAN2 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+#define STM32_CAN_CAN2_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 FALSE
+#define STM32_DAC_USE_DAC1_CH2 FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM6 FALSE
+#define STM32_GPT_USE_TIM7 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+#define STM32_GPT_USE_TIM12 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+#define STM32_GPT_TIM12_IRQ_PRIORITY 7
+#define STM32_GPT_TIM14_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS 2
+#define STM32_MAC_RECEIVE_BUFFERS 4
+#define STM32_MAC_BUFFERS_SIZE 1522
+#define STM32_MAC_PHY_TIMEOUT 100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY 13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY 3
+#define STM32_SDC_SDIO_IRQ_PRIORITY 9
+#define STM32_SDC_WRITE_TIMEOUT_MS 250
+#define STM32_SDC_READ_TIMEOUT_MS 25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
+#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_USE_OTG2 FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG2_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+
+#endif /* _MCUCONF_H_ */
diff -Naur ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/readme.txt ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/readme.txt
--- ChibiOS-iso/testhal/STM32/STM32F4xx/USB_AUDIO/readme.txt 1970-01-01 07:00:00.000000000 +0700
+++ ChibiOS-iso-demo/testhal/STM32/STM32F4xx/USB_AUDIO/readme.txt 2015-08-07 15:14:40.419742317 +0600
@@ -0,0 +1,32 @@
+*****************************************************************************
+** ChibiOS/HAL - USB-AUDIO driver demo for STM32. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+The application demonstrates the use of the STM32 USB (OTG) driver in
+isochronous mode. Application provides both playback and capture interfaces and
+implements audio loopback (echo).
+
+** Board Setup **
+
+None.
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+ http://www.st.com
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment