brandonschlack

Radpad Build Guide

1. Prepare your build
   1. Snap off the top OLED Plate from the Main PCB. Also break off the connecting pieces, and put the OLED Plate to the side. You will get to it later.
   2. Decide on a layout. If you want to build any of the smaller layouts (4x3, 3x4, or 3x3), then now is the time to break off a column and/or row. You can discard the unused column and/or row.
2. Main PCB
   1. Solder Diodes. Choose which Diodes you want to use, SMD or Through-Hole
      1. Through-Hole Diodes have the long, wire-like legs (called leads).
3. Bend the legs around the side of your finger, with the orange diode in the middle.