-
-
Save PolynomialDivision/395d009c84b426d780549c5fa1f64ff1 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
[ 0.000000] Linux version 6.1-rc2 (nick@coolnew) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r21070+1-a3da858ab0) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Nov 6 16:32:42 2022 | |
[ 0.000000] Machine model: Bananapi BPI-R64 | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] | |
[ 0.000000] DMA32 empty | |
[ 0.000000] Normal empty | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] | |
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] | |
[ 0.000000] node 0: [mem 0x0000000043030000-0x000000007fffffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] | |
[ 0.000000] psci: probing for conduit method from DT. | |
[ 0.000000] psci: PSCIv1.1 detected in firmware. | |
[ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
[ 0.000000] psci: SMC Calling Convention v1.2 | |
[ 0.000000] percpu: Embedded 17 pages/cpu s30312 r8192 d31128 u69632 | |
[ 0.000000] pcpu-alloc: s30312 r8192 d31128 u69632 alloc=17*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
[ 0.000000] Detected VIPT I-cache on CPU0 | |
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration | |
[ 0.000000] CPU features: detected: ARM erratum 843419 | |
[ 0.000000] CPU features: detected: ARM erratum 845719 | |
[ 0.000000] alternatives: applying boot alternatives | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 | |
[ 0.000000] Kernel command line: root=/dev/mmcblk1p65 | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 1015508K/1048576K available (8448K kernel code, 896K rwdata, 2284K rodata, 448K init, 291K bss, 33068K reserved, 0K cma-reserved) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] Tracing variant of Tasks RCU enabled. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
[ 0.000000] Root IRQ handler: gic_handle_irq | |
[ 0.000000] GIC: Using split EOI/Deactivate mode | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns | |
[ 0.000001] sched_clock: 56 bits at 13MHz, resolution 80ns, wraps every 4398046511080ns | |
[ 0.000232] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000) | |
[ 0.000241] pid_max: default: 32768 minimum: 301 | |
[ 0.000359] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
[ 0.000371] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
[ 0.001437] cblist_init_generic: Setting adjustable number of callback queues. | |
[ 0.001450] cblist_init_generic: Setting shift to 1 and lim to 1. | |
[ 0.001562] rcu: Hierarchical SRCU implementation. | |
[ 0.001566] rcu: Max phase no-delay instances is 1000. | |
[ 0.001691] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build | |
[ 0.002053] smp: Bringing up secondary CPUs ... | |
[ 0.002389] Detected VIPT I-cache on CPU1 | |
[ 0.002397] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x00000000bebc20, CPU1: 0x00000000000000 | |
[ 0.002419] CPU features: Unsupported CPU feature variation detected. | |
[ 0.002501] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
[ 0.002571] smp: Brought up 1 node, 2 CPUs | |
[ 0.002576] SMP: Total of 2 processors activated. | |
[ 0.002580] CPU features: detected: 32-bit EL0 Support | |
[ 0.002583] CPU features: detected: CRC32 instructions | |
[ 0.002616] CPU: All CPU(s) started at EL2 | |
[ 0.002619] alternatives: applying system-wide alternatives | |
[ 0.006500] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.006519] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
[ 0.006609] pinctrl core: initialized pinctrl subsystem | |
[ 0.007190] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.007487] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations | |
[ 0.007515] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
[ 0.007540] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
[ 0.007949] thermal_sys: Registered thermal governor 'fair_share' | |
[ 0.007953] thermal_sys: Registered thermal governor 'bang_bang' | |
[ 0.007956] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.007958] thermal_sys: Registered thermal governor 'user_space' | |
[ 0.008017] ASID allocator initialised with 65536 entries | |
[ 0.008373] pstore: Registered ramoops as persistent store backend | |
[ 0.008377] ramoops: using 0x10000@0x42ff0000, ecc: 0 | |
[ 0.019666] gpio-499 (asm_sel): hogged as output/high | |
[ 0.028889] cryptd: max_cpu_qlen set to 1000 | |
[ 0.030108] SCSI subsystem initialized | |
[ 0.030295] libata version 3.00 loaded. | |
[ 0.031149] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.031718] NET: Registered PF_INET protocol family | |
[ 0.031869] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.032656] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) | |
[ 0.032678] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.032691] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
[ 0.032746] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) | |
[ 0.032994] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.033147] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 0.033174] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 0.033326] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.033357] PCI: CLS 0 bytes, default 64 | |
[ 0.034282] workingset: timestamp_bits=46 max_order=18 bucket_order=0 | |
[ 0.037148] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.037158] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
[ 0.075157] mt-pmic-pwrap 10001000.pwrap: unexpected interrupt int=0x1 | |
[ 0.090992] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
[ 0.092014] printk: console [ttyS0] disabled | |
[ 0.112215] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 118, base_baud = 1562500) is a ST16650V2 | |
[ 0.729283] printk: console [ttyS0] enabled | |
[ 0.734434] 1100c000.serial: ttyS1 at MMIO 0x1100c000 (irq = 119, base_baud = 17499995) is a MediaTek BTIF | |
[ 0.744270] serial serial0: tty port ttyS1 registered | |
[ 0.750027] mtk_rng 1020f000.rng: registered RNG driver | |
[ 0.750195] random: crng init done | |
[ 0.762074] loop: module loaded | |
[ 0.765728] mtk-ecc 1100e000.ecc: probed | |
[ 0.771933] spi-nand spi1.0: Winbond SPI NAND was found. | |
[ 0.777254] spi-nand spi1.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 | |
[ 0.785423] mtk-snand 1100d000.spi: ECC strength: 4 bits per 512 bytes | |
[ 0.792212] 3 fixed-partitions partitions found on MTD device spi1.0 | |
[ 0.798569] Creating 3 MTD partitions on "spi1.0": | |
[ 0.803371] 0x000000000000-0x000000080000 : "bl2" | |
[ 0.809045] 0x000000080000-0x000000280000 : "fip" | |
[ 0.816291] 0x000000280000-0x000008000000 : "ubi" | |
[ 0.967825] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffffc009200000, irq 125 | |
[ 0.977067] mtk_soc_eth 1b100000.ethernet: generated random MAC address f2:1d:9b:51:60:0a | |
[ 0.985588] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xffffffc009200000, irq 125 | |
[ 0.995433] i2c_dev: i2c /dev entries driver | |
[ 1.002355] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) | |
[ 1.012992] NET: Registered PF_INET6 protocol family | |
[ 1.013569] mtk-msdc 11240000.mmc: Got CD GPIO | |
[ 1.020091] Segment Routing with IPv6 | |
[ 1.026136] In-situ OAM (IOAM) with IPv6 | |
[ 1.030125] NET: Registered PF_PACKET protocol family | |
[ 1.035383] 8021q: 802.1Q VLAN Support v1.8 | |
[ 1.041035] pstore: Using crash dump compression: deflate | |
[ 1.055565] ------------[ cut here ]------------ | |
[ 1.060204] Kernel BUG at regulator_check_voltage+0xb0/0xf0 [verbose debug info unavailable] | |
[ 1.062418] mtk-pcie 1a143000.pcie: host bridge /pcie@1a143000 ranges: | |
[ 1.068656] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP | |
[ 1.075248] mtk-pcie 1a143000.pcie: Parsing ranges property... | |
[ 1.081257] Modules linked in: | |
[ 1.081264] CPU: 1 PID: 328 Comm: kworker/1:7 Tainted: G S 6.1-rc2 #0 | |
[ 1.087088] mtk-pcie 1a143000.pcie: MEM 0x0020000000..0x0027ffffff -> 0x0020000000 | |
[ 1.090126] Hardware name: Bananapi BPI-R64 (DT) | |
[ 1.110541] Workqueue: events dbs_work_handler | |
[ 1.114988] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
[ 1.121944] pc : regulator_check_voltage+0xb0/0xf0 | |
[ 1.126728] lr : regulator_set_voltage_unlocked+0x88/0x110 | |
[ 1.129638] mmc1: host does not support reading read-only switch, assuming write-enable | |
[ 1.132207] sp : ffffffc00956bb30 | |
[ 1.132209] x29: ffffffc00956bb30 x28: ffffff8000efb400 x27: 0000000000000024 | |
[ 1.132219] x26: 00000000001312d0 x25: 0000000000118c30 x24: 00000000001312d0 | |
[ 1.132227] x23: 0000000000149970 | |
[ 1.146036] mmc1: new high speed SDHC card at address e624 | |
[ 1.150642] x22: ffffff800038f800 | |
[ 1.159192] mmcblk1: mmc1:e624 SL16G 14.8 GiB | |
[ 1.161068] x21: ffffff8000efb100 | |
[ 1.161072] x20: 00000000001312d0 | |
[ 1.175424] GPT:partition_entry_array_crc32 values don't match: 0xa0b5ce6d != 0xab54d286 | |
[ 1.177757] x19: 0000000000000000 x18: 00000000799b2550 | |
[ 1.181067] GPT:Primary header thinks Alt. header is not at the end of the disk. | |
[ 1.189143] x17: 0000000000000003 x16: 0000000000000001 x15: 0000000000000000 | |
[ 1.189151] x14: 0000000000000000 x13: 0000000000000146 x12: 00000000fa83b2da | |
[ 1.189159] x11: 000000000000013d x10: 0000000000000850 | |
[ 1.194472] GPT:305184 != 31116287 | |
[ 1.201842] x9 : ffffffc00956b910 | |
[ 1.201846] x8 : ffffff8000b9edf0 x7 : 0000000000000001 | |
[ 1.208970] GPT:Alternate GPT header not at the end of the disk. | |
[ 1.216092] x6 : 00000000001312d0 | |
[ 1.216095] x5 : 0000000000118c30 x4 : 0000000000000000 x3 : 0000000000000000 | |
[ 1.216103] x2 : ffffffc00956bb68 x1 : ffffffc00956bb6c | |
[ 1.221321] GPT:305184 != 31116287 | |
[ 1.224706] x0 : ffffff800038f800 | |
[ 1.228095] GPT: Use GNU Parted to correct GPT errors. | |
[ 1.233307] | |
[ 1.233309] Call trace: | |
[ 1.233312] regulator_check_voltage+0xb0/0xf0 | |
[ 1.242680] FIT: Selected configuration: "config-mt7622-bananapi-bpi-r64-pcie1" (OpenWrt bananapi_bpi-r64 with mt7622-bananapi-bpi-r64-pcie1) | |
[ 1.242694] regulator_set_voltage+0x3c/0x64 | |
[ 1.249831] FIT: kernel sub-image 0x00001000..0x0052fd0a "kernel-1" (ARM64 OpenWrt Linux-6.1-rc2) | |
[ 1.255030] mtk_cpufreq_voltage_tracking+0x11c/0x26c | |
[ 1.255039] mtk_cpufreq_set_target+0x1c4/0x350 | |
[ 1.258444] FIT: flat_dt sub-image 0x00530000..0x005380c5 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r64 device tree blob) | |
[ 1.261820] __cpufreq_driver_target+0x2f4/0x674 | |
[ 1.261826] od_dbs_update+0xb8/0x19c | |
[ 1.266969] FIT: flat_dt sub-image 0x00539000..0x0053911a "fdt-mt7622-bananapi-bpi-r64-pcie1" (ARM64 OpenWrt bananapi_bpi-r64 device tree overlay mt7622-bananapi-bpi-r64-pcie1) | |
[ 1.268431] dbs_work_handler+0x3c/0x7c | |
[ 1.270883] FIT: flat_dt sub-image 0x0053a000..0x0053a20f "fdt-mt7622-bananapi-bpi-r64-sata" (ARM64 OpenWrt bananapi_bpi-r64 device tree overlay mt7622-bananapi-bpi-r64-sata) | |
[ 1.275297] process_one_work+0x200/0x3a0 | |
[ 1.287998] FIT: filesystem sub-image 0x0053b000..0x00859fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r64 rootfs) | |
[ 1.292237] worker_thread+0x170/0x4c0 | |
[ 1.292244] kthread+0xd4/0xe0 | |
[ 1.302066] FIT: selecting configured loadable "rootfs-1" to be root filesystem | |
[ 1.307092] ret_from_fork+0x10/0x20 | |
[ 1.311631] mmcblk1: p1 p2 p3 p4 p5 p6 p65(rootfs-1) p66(rootfs_data) p128 | |
[ 1.322903] Code: 6b04001f 54fffe6b 2a0003e4 17fffff3 (d4210000) | |
[ 1.413322] ---[ end trace 0000000000000000 ]--- | |
[ 1.420707] Kernel panic - not syncing: Oops - BUG: Fatal exception | |
[ 1.426969] SMP: stopping secondary CPUs | |
[ 1.430886] Kernel Offset: disabled | |
[ 1.434365] CPU features: 0x00000,00c00000,0000400b | |
[ 1.439235] Memory Limit: none | |
[ 1.444948] Rebooting in 1 seconds.. |
Any new state here?
Mainline discussion shows that it is no openwrt specific problem:
http://lists.infradead.org/pipermail/linux-arm-kernel/2022-November/788416.html
Maybe you can try print the values which causing the bug (i guess max is calculated the wrong way)
https://forum.banana-pi.org/t/banana-pi-r64-trying-to-bump-openwrt-kernel-to-6-1/14189/5?u=frank-w
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Done. :)