Prototype-X

#!/bin/sh

# set hostname
echo <%= hostname %> > /etc/hostname
/etc/init.d/hostname.sh

# Set up networking
cat > /etc/network/interfaces << EOF
# The loopback network interface
auto lo

Prototype-X

iLO Remote Console

This small script lets you start iLO Java-based console from shell.

But why not HTML5?

• iLO 2/3 doesn't have HTML5 console
• Mounting local (from the client computer) ISOs is PAINFULLY slow via HTML5 client

TL;DR

If you just start it, it will ask you for everything:

Prototype-X

# local port forwarding
# the target host 192.168.0.100 is running a service on port 8888
# and you want that service available on the localhost port 7777

ssh -L 7777:localhost:8888 user@192.168.0.100

# remote port forwarding
# you are running a service on localhost port 9999 
# and you want that service available on the target host 192.168.0.100 port 12340

Prototype-X

Install pgAdmin4 v2.0 with python3 on Ubuntu 16.04 DESKTOP mode

1. Get Python Wheel pgAdmin4

    wget https://ftp.postgresql.org/pub/pgadmin/pgadmin4/v2.0/pip/pgadmin4-2.0-py2.py3-none-any.whl
   

2. Install pip3

    sudo apt install python3-pip
   

Prototype-X

#Container Resource Allocation Options in docker-run

now see: https://docs.docker.com/engine/reference/run/#runtime-constraints-on-resources

You have various options for controlling resources (cpu, memory, disk) in docker. These are principally via the docker-run command options.

##Dynamic CPU Allocation -c, --cpu-shares=0
CPU shares (relative weight, specify some numeric value which is used to allocate relative cpu share)

Prototype-X

Latency Comparison Numbers (~2012)
----------------------------------
L1 cache reference                           0.5 ns
Branch mispredict                            5   ns
L2 cache reference                           7   ns                      14x L1 cache
Mutex lock/unlock                           25   ns
Main memory reference                      100   ns                      20x L2 cache, 200x L1 cache
Compress 1K bytes with Zippy             3,000   ns        3 us
Send 1K bytes over 1 Gbps network       10,000   ns       10 us
Read 4K randomly from SSD*             150,000   ns      150 us          ~1GB/sec SSD

Prototype-X

HP Smart Storage Admin CLI (ssacli) installation and usage on Proxmox PVE (6.x)

Why use HP Smart Storage Admin CLI?

You can use ssacli (smart storage administrator command line interface) tool to manage any of supported HP Smart Array Controllers in your Proxmox host without need to reboot your server to access Smart Storage Administrator in BIOS. That means no host downtime when managing your storage.

CLI is not as convenient as GUI interface provided by BIOS or desktop utilities, but still allows you to fully manage your controller, physical disks and logical drives on the fly with no Proxmox host downtime.

ssacli replaces older hpssacli, but shares the same syntax and adds support for newer servers and controllers.

Installation

Prototype-X

Материалы по Go (golang)

На русском языке

Мануалы и туториалы

• [Введение в программирование на Go][1]
• [Маленькая книга о Go][3]
• [Эффективный Go][2]
• Есть еще [Краткий пересказ Effective Go на русском языке][4], но 2009 года

Prototype-X

TL;DR

Install Postgres 9.6, and then:

sudo pg_dropcluster 9.6 main --stop
sudo pg_upgradecluster 9.5 main
sudo pg_dropcluster 9.5 main

Set db path for pg_upgradecluster:

Prototype-X

SET @history_interval = 7;
SET @trends_interval = 90;

DELETE FROM alerts WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);
DELETE FROM acknowledges WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);
DELETE FROM events WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);

DELETE FROM history WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);
DELETE FROM history_uint WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);
DELETE FROM history_str WHERE (UNIX_TIMESTAMP(NOW()) - clock) > (@history_interval * 24 * 60 * 60);