RobolinkAkademi

<?xml version="1.0" encoding="UTF-8"?> 
<kml xmlns="http://earth.google.com/kml/2.2">
<Placemark>
<name>arduino</name>
<description></description>
<Point>
<coordinates>longitude,latitude</coordinates>
</Point>
</Placemark> 
</kml>

RobolinkAkademi

#include <Wire.h> 
void setup()
{
  Wire.begin();
 
  Serial.begin(9600);
  while (!Serial);
  Serial.println("\nI2C Scanner");
} 
void loop()

RobolinkAkademi

#include <LiquidCrystal.h>
LiquidCrystal lcd(12,11,5,4,3,2); 
int pirsensor = 8; 
int state = LOW;
int val = 0;
void setup()
{
Serial.begin(9600); 
lcd.begin(16,2);
pinMode(pirsensor, INPUT); 

RobolinkAkademi

#include <VirtualWire.h> 
#define led 3 
char message[] = " ";
void setup() 
{
pinMode(led, OUTPUT);
Serial.begin(9600);
vw_set_ptt_inverted(true);
vw_set_rx_pin(11); 
vw_setup(4000);

RobolinkAkademi

#include <VirtualWire.h>
#define buton 3 
char *message;
int butonDeger;
void setup()
{
Serial.begin(9600);
pinMode(buton, INPUT);
vw_set_ptt_inverted(true);
vw_set_tx_pin(12);

RobolinkAkademi

#include<Servo.h> 
Servo sg90;
const byte potansiyometre = A5; 
int pot_deger;
void setup() 
{
Serial.begin(9600);
sg90.attach(13);
}
void loop()

RobolinkAkademi

#include <Servo.h>
Servo sg90; 
int pos = 0; 
void setup() 
{
sg90.attach(13);
}
void loop()
{
for (pos = 0; pos <= 180; pos += 1)

RobolinkAkademi

int ust = 2; //A
int solust = 3; //F
int sagust = 4; //B
int orta = 5; //G
int solalt = 6; //E
int sagalt = 7; //C
int alt = 8; //D
int nokta = 9; //DP
void setup()
{

RobolinkAkademi

int ust = 2;//A 
int solust = 3; //F
int sagust = 4; //B
int orta = 5; //G
int solalt = 6; //E
int sagalt = 7; //C
int alt = 8; //D
int nokta = 9; //DP 
void setup()
{ 

RobolinkAkademi

#include<DHT11.h>
#define Sensor_pin 4
#define kirmiziPin 5
#define maviPin 6
DHT11 dgt11(Sensor_pin);
float Nem=0, Sicaklik=0
float Mavi_deger=0, Kirmizi_deger=0;
void setup()
{
Serial.begin(9600);