Inspired by this
More of my guides: Debloating LDPlayer - Debloating Nox (Updated)
Edit 22/8/2021: I have updated MEmu and it seems like it reinstalls the apps and re-enables the services. Repeat steps 5, 7, 8, and 9 if you update MEmu.
In my experience, Nox can be quite slow and choppy, and looks like I'm not the only person with this problem. A lot of people say that MEmu performs better than Nox, and I could agree with that. I have no chopping issues with it so far. But like Nox, there are kinda shady stuff going on. No one has made a guide on this, so I did it.
- If you don't have MEmu yet, go download it. Better to go with the offline installer
- Go to MEmu's Settings and enable Root Mode if it isn't enabled
- For the launcher, I would suggest going away from MEmu's launcher. Go install one of your choice.
Once you got the launcher, get this and add the launcher to auto-start. (if you are on MEmu 6.3.7 or below, no need for the auto-start app, just set it as default in the Android Settings). Also check MEmu preferences forUse Launcher Hijack and follow the instructions hereApp auto-start
if it's on.- Go get something like Root Browser, go to the
system
folder and then thepriv-app
folder. Delete the MEmu guide, the MEmu launcher, and the Google apps installer (Guide
,Launcher
, andInstaller
folders) provided by MEmu from the Root Browser, then reboot the emulator. - Go get Blokada, enable it, then in the Android Settings, go to VPN options, and set Blokada to
Always-on VPN
. Go toActivity
in the app and disallow everything that has to do with ads and anything that includesmicrovirt
,applovin
,applvn
,memuplay
, andfacebook
. Feel free to disallow requests that are unknown to you as well. - Open Run (
Win+R
) then type inC:\Windows\System32\drivers\etc\hosts
. Open it with a text editor of your choice. - When open, place this in the hosts file:
0.0.0.0 memuplay.com
0.0.0.0 www.memuplay.com
0.0.0.0 u888.v.baishan-cloud.net
0.0.0.0 u999.v.bsclink.cn
0.0.0.0 uz95.v.bsclink.cn
0.0.0.0 ut89.v.bsclink.cn
0.0.0.0 dl.memuplay.com
0.0.0.0 www.microvirt.com
0.0.0.0 microvirt.com
0.0.0.0 hebei.22.121.in-addr.arpa
0.0.0.0 d2bg5ibrp06389.cloudfront.net
0.0.0.0 www.xyaz.cn.w.cdngslb.com
0.0.0.0 d1ygnxto00lnhl.cloudfront.net
0.0.0.0 d3p779s2xhx48e.cloudfront.net
0.0.0.0 d2bg5ibrp06389.cloudfront.net
(Most of these domains are according to Glasswire. If there are any more to block, tell me in the comments)
And block the IP addresses using the files attached to this gist (original courtesy of ehindiayleau). Make sure both the batch and the text file are in the same folder! Open command prompt as admin and CD to the folder where you saved the two files.
- Open Run and type in
services.msc
. Find MemuSVC, stop the service, and set its startup mode toDisabled
. This is to prevent it from running in the background if you close all foreground MEmu processes.
Open Multi-MEmu, close the emulator window and go to the instance settings.
Engine
If you have a good CPU and plenty of RAM to spare, then go to Engine, and set the Preset to High
. (anything higher is useless if you use a 32-bit Android instance)
If you use a 64-bit Android 7/9 instance (which I would suggest against as I have a lot of issues with it), then you can set the preset to Top
Display
If you have a good enough GPU, set the resolution to 1920 * 1080. If you want to set it to 2K so that you can play games like Ragnarok at a higher resolution, select Customize and set the Width to 2560
and the Height to 1440
. (For Ragnarok, I would suggest setting the DPI to 320)
(NEW!) Enable Discord Live
if you're going to screenshare MEmu. Disable it if you're done screensharing.
Storage
Set the Disk Management to Manual management
and crank the slider to the max. (The emulator must be closed for this!)
Device
Set the microphone to Disabled
if you are not using it.
And you're done! Have fun gaming with MEmu with less worries!
I right-clicked the batch file and ran it as administrator. But I did what you said and got the same error.
I use both Nox and Memu and did the same for Nox and that one worked. Could that be the problem? Can't run both?
Edit: Fixed it. Had to put the full path to memu_block.txt:.