Arjun Vikram arjvik

## blog.md

      
              4 files
            
          
              14 forks
            
          
              5 comments
            
          
              180 stars
            
          
                Hellisotherpeople
                / blog.md
            
            
              Last active
              July 23, 2024 12:38
            
              
                You probably don't know how to do Prompt Engineering, let me educate you. 
              
          
    You probably don't know how to do Prompt Engineering

(This post could also be titled "Features missing from most LLM front-ends that should exist")

Apologies for the snarky title, but there has been a huge amount of discussion around so called "Prompt Engineering" these past few months on all kinds of platforms. Much of it is coming from individuals who are peddling around an awful lot of "Prompting" and very little "Engineering".
Most of these discussions are little more than users finding that writing more creative and complicated prompts can help them solve a task that a more simple prompt was unable to help with. I claim this is not Prompt Engineering. This is not to say that crafting good prompts is not a difficult task, but it does not involve doing any kind of sophisticated modifications to general "template" of a prompt.
Others, who I think do deserve to call themselves "Prompt Engineers" (and an awful lot more than that), have been writing about and utilizing the rich new eco-system

  
## faster_lzma_decoder_x86.patch
From 387fd25f57f41009fc317f7922e957de9f370ff2 Mon Sep 17 00:00:00 2001
From: Ilya Kurdyukov <jpegqs@gmail.com>
Date: Tue, 14 Dec 2021 21:54:32 +0700
Subject: [PATCH] faster lzma_decoder for x86

Notice: Uses inline assembly with CMOV instruction.

Another change that removes the comparison with in_size can give a few
percent speedup for architectures with a small number of registers.
---

## idea.md

      
              1 file
            
          
              6 forks
            
          
              147 comments
            
          
              261 stars
            
          
                motorailgun
                / idea.md
            
            
              Last active
              June 18, 2024 06:22
            
              
                Installing Windows and Linux into the same partition
              
          
    Installing Windows and Linux into the same partition

But WHY?

There was a reddit post about installing Arch on NTFS3 partition. Since Windows and Linux doesn't have directories with same names under the /(C:\), I thought it's possible, and turned out it was actually possible.

If you are not familiar to Linux, for example you've searched on Google "how to dualboot Linux and Windos" or brbrbr... you mustn't try this. This is not practical.
Pre-requirements


UEFI system
Any Linux live-boot CD/DVD/USB... with Linux kernel newer than 5.15
Windows installer USB


## youtube-autoskip.user.js
// ==UserScript==
// @name         Auto Skip YouTube Ads
// @version      1.0.2
// @description  Speed up and skip YouTube ads automatically
// @author       codiac-killer
// @match        *://*.youtube.com/*
// @exclude      *://*.youtube.com/subscribe_embed?*
// ==/UserScript==

let main = new MutationObserver(() => {

## transient_prompt.zsh
### Simple transient prompt

[[ -c /dev/null ]]  ||  return
zmodload zsh/system ||  return

## Set the transient prompt PROMPT here -
TRANSIENT_PROMPT='%# '   # Sample value

function set_prompt {
    ## Set the values of PROMPT and RPROMPT here

## zsh-cheatsheet.md

      
              1 file
            
          
              42 forks
            
          
              16 comments
            
          
              385 stars
            
          
                ClementNerma
                / zsh-cheatsheet.md
            
            
              Last active
              July 17, 2024 20:54
            
          
    ZSH CheatSheet

This is a cheat sheet for how to perform various actions to ZSH, which can be tricky to find on the web as the syntax is not intuitive and it is generally not very well-documented.
Strings


Description
Syntax


Get the length of a string
${#VARNAME}


Get a single character
${VARNAME[index]}


## docker.md

      
              1 file
            
          
              143 forks
            
          
              224 comments
            
          
              1211 stars
            
          
                FreddieOliveira
                / docker.md
            
            
              Last active
              July 25, 2024 00:50
            
              
                This tutorial shows how to run docker natively on Android, without VMs and chroot.
              
          
    Docker on Android 🐋📱

Edit 🎉

All packages, except for Tini have been added to termux-root. To install them, simply pkg install root-repo && pkg install docker. This will install the whole docker suite, left only Tini to be compiled manually.

Summary


## RaspberryPi4Archlinux64EncryptionUSBBootBtrfsGuide.md

      
              1 file
            
          
              4 forks
            
          
              35 comments
            
          
              70 stars
            
          
                XSystem252
                / RaspberryPi4Archlinux64EncryptionUSBBootBtrfsGuide.md
            
            
              Last active
              July 5, 2024 02:33
            
              
                How To Set Up a Raspberry Pi 4 with Archlinux 64-bit (AArch64) and Full Disk Encryption (+SSH unlock), USB Boot (No SD-Card) and btrfs
              
          
    How To Set Up a Raspberry Pi 4 with Archlinux 64-bit (AArch64) and Full Disk Encryption (+SSH unlock), USB Boot (No SD-Card) and btrfs

Written by: XSystem

First published on: 20 Dec 2020

Last updated on: 20 Dec 2020
[0] Introduction

Overview


## aarch64_amx.py
# IDA (disassembler) and Hex-Rays (decompiler) plugin for Apple AMX
#
# WIP research. (This was edited to add more info after someone posted it to
# Hacker News. Click "Revisions" to see full changes.)
#
# Copyright (c) 2020 dougallj


# Based on Python port of VMX intrinsics plugin:
# Copyright (c) 2019 w4kfu - Synacktiv

## QuPath-Transform and transform objects.groovy
/**
 * Script to transfer QuPath objects from one image to another, applying an AffineTransform to any ROIs.
 *
 * This is a based upon the script I posted on the epic forum thread https://forum.image.sc/t/interactive-image-alignment/23745/9?u=petebankhead
 * It has been updated for QuPath v0.2.0 (and made quite a lot shorter along the way).
 *
 * @author Pete Bankhead
 */

// SET ME! Define transformation matrix
	From 387fd25f57f41009fc317f7922e957de9f370ff2 Mon Sep 17 00:00:00 2001
	From: Ilya Kurdyukov <jpegqs@gmail.com>
	Date: Tue, 14 Dec 2021 21:54:32 +0700
	Subject: [PATCH] faster lzma_decoder for x86

	Notice: Uses inline assembly with CMOV instruction.

	Another change that removes the comparison with in_size can give a few
	percent speedup for architectures with a small number of registers.
	---
	// ==UserScript==
	// @name Auto Skip YouTube Ads
	// @version 1.0.2
	// @description Speed up and skip YouTube ads automatically
	// @author codiac-killer
	// @match ://.youtube.com/*
	// @exclude ://.youtube.com/subscribe_embed?*
	// ==/UserScript==

	let main = new MutationObserver(() => {
	### Simple transient prompt

	[[ -c /dev/null ]] \|\| return
	zmodload zsh/system \|\| return

	## Set the transient prompt PROMPT here -
	TRANSIENT_PROMPT='%# ' # Sample value

	function set_prompt {
	## Set the values of PROMPT and RPROMPT here
Description	Syntax
Get the length of a string	`${#VARNAME}`
Get a single character	`${VARNAME[index]}`
	# IDA (disassembler) and Hex-Rays (decompiler) plugin for Apple AMX
	#
	# WIP research. (This was edited to add more info after someone posted it to
	# Hacker News. Click "Revisions" to see full changes.)
	#
	# Copyright (c) 2020 dougallj


	# Based on Python port of VMX intrinsics plugin:
	# Copyright (c) 2019 w4kfu - Synacktiv
	/**
	* Script to transfer QuPath objects from one image to another, applying an AffineTransform to any ROIs.
	*
	* This is a based upon the script I posted on the epic forum thread https://forum.image.sc/t/interactive-image-alignment/23745/9?u=petebankhead
	* It has been updated for QuPath v0.2.0 (and made quite a lot shorter along the way).
	*
	* @author Pete Bankhead
	*/

	// SET ME! Define transformation matrix