Here-Be-Dragons

#include "application.h"
#include "neopixel/neopixel.h"

SYSTEM_MODE(AUTOMATIC);

// Define which pins are connected with a 1-10M resistor.
// The first pin will be connected to the touch sensor
// and must be D0, D1, D2, D3, D4 A0, A1, A3, A4, A5, A6, A7
// see: http://docs.spark.io/firmware/#interrupts-attachinterrupt

sloria

The Best of the Best Practices (BOBP) Guide for Python

A "Best of the Best Practices" (BOBP) guide to developing in Python.

In General

Values

• "Build tools for others that you want to be built for you." - Kenneth Reitz
• "Simplicity is alway better than functionality." - Pieter Hintjens

davisford

sudo apt-get install avahi-daemon avahi-discover avahi-utils libnss-mdns mdns-scan

jboner

Latency Comparison Numbers (~2012)
----------------------------------
L1 cache reference                           0.5 ns
Branch mispredict                            5   ns
L2 cache reference                           7   ns                      14x L1 cache
Mutex lock/unlock                           25   ns
Main memory reference                      100   ns                      20x L2 cache, 200x L1 cache
Compress 1K bytes with Zippy             3,000   ns        3 us
Send 1K bytes over 1 Gbps network       10,000   ns       10 us
Read 4K randomly from SSD*             150,000   ns      150 us          ~1GB/sec SSD