This modem is also sold as a MegaFon M150-2 USB dongle
Install the needed packages via opkg
tool
opkg update
opkg install kmod-usb-net-cdc-ether
opkg install usb-modeswitch
- install software
- reboot router
- connect device
- create a new network named lte
- select the eth device of the dongle ( e.g eth1)
- assign the network to firewall zone wan
Depends on the firmware of the lte dongle. There are modded firmwares available where you can select the allowed bands.
Open the interface via http://192.168.8.1/ or http://192.168.4.1/