RJNY

{"apps":[{"id":"dev.imranr.obtainium","url":"https://github.com/ImranR98/Obtainium","author":"ImranR98","name":"Obtainium","latestVersion":"v1.1.3","apkUrls":"[[\"app-arm64-v8a-fdroid-release.apk\",\"https://api.github.com/repos/ImranR98/Obtainium/releases/assets/161880218\"],[\"app-arm64-v8a-release.apk\",\"https://api.github.com/repos/ImranR98/Obtainium/releases/assets/161880209\"]]","otherAssetUrls":"[]","preferredApkIndex":1,"additionalSettings":"{\"includePrereleases\":true,\"fallbackToOlderReleases\":true,\"filterReleaseTitlesByRegEx\":\"\",\"filterReleaseNotesByRegEx\":\"\",\"verifyLatestTag\":false,\"dontSortReleasesList\":false,\"useLatestAssetDateAsReleaseDate\":false,\"trackOnly\":false,\"versionExtractionRegEx\":\"\",\"matchGroupToUse\":\"\",\"versionDetection\":true,\"releaseDateAsVersion\":false,\"useVersionCodeAsOSVersion\":false,\"apkFilterRegEx\":\"\",\"invertAPKFilter\":false,\"autoApkFilterByArch\":true,\"appName\":\"\",\"exemptFromBackgroundUpdates\":false,\"skipUpdateNotifications\":false

Drallas

Hyper-converged High Available Homelab with Proxmox

This is me documenting my journey moving my Homelab from a Qnap NAS and a Single host Proxmox server to a Hyper-converged multi-node Proxmox Cluster.

The reason to document it here is twofold:

1. Information often it scattered 'all over the place', but never 100% applicable to the setup I have.
2. To remember 'what the fuck' did I do some months ago.
3. Writing it for 'a public' forces me to think it all through again and make sure it's correct.

It's written 'first to scratch my own itch' but hopefully it benefits others too, or even better, that others improve upon my implementations. Feel free to comment or share improvements and insights!

Drallas

Mount Volumes into Proxmox VMs with Virtio-fs

Part of collection: Hyper-converged Homelab with Proxmox

Virtio-fs is a shared file system that lets virtual machines access a directory tree on the host. Unlike existing approaches, it is designed to offer local file system semantics and performance. The new virtiofsd-rs Rust daemon Proxmox 8 uses, is receiving the most attention for new feature development.

Performance is very good (while testing, almost the same as on the Proxmox host)

VM Migration is not possible yet, but it's being worked on!

Drallas

Docker Swarm in LXC Containers

Part of collection: Hyper-converged Homelab with Proxmox

After struggling for some days, and since I really needed this to work (ignoring the it can't be done vibe everywhere), I managed to get Docker to work reliable in privileged Debian 12 LXC Containers on Proxmox 8

(Unfortunately, I couldn't get anything to work in unprivileged LXC Containers)

There are NO modifications required on the Proxmox host or the /etc/pve/lxc/xxx.conf file; everything is done on the Docker Swarm host. So the only obvious candidate who could break this setup, are future Docker Engine updates!

scyto

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.

scyto

Enable OSPF Routing on Thunderbolt Mesh

This has been deprectaed

It is now superceded by Openfabric Routing see here

continue at your own peril, for reference only now.

Old Gist

This will result in an IPv4 routable mesh network that can survive any one node failure or any one cable failure. All the steps in this section must be performed on each node

scyto

Thunderbolt Networking

this gist is part of this series

NOTE FOR THIS TO BE RELIABLE ON NODE RESTARTS YOU WILL NEED PROXMOX KERNEL 6.2.16-14-pve OR HIGER

This fixes issues i bugged with the thunderbolt / thunderbolt-net maintainers (i will take everyones thanks now, lol)

Install LLDP - this is great to see what nodes can see which.

• install lldpctl with apt install lldpd

scyto

ProxMox Cluster - Soup-to-Nutz

aka what i did to get from nothing to done.

note: these are designed to be primarily a re-install guide for myself (writing things down helps me memorize the knowledge), as such don't take any of this on blind faith - some areas are well tested and the docs are very robust, some items, less so). YMMV

Purpose of Proxmox cluster project

Required Outomces of cluster project

ThioJoe

# A basic script for uninstalling app packages in Windows 10/11, including those pre-installed with Windows
#
# Note: If you get an error about the script not being allowed to run, the below command will change the execution polciy temporarily for one session only:
# Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope Process
#
# To execute the script, open a Powershell window to the directory with the script and run the following command using your scripts file name (and don't forget the .\ )
# .\WhateverScriptName.ps1
# -------------------------------------------------------------------------------------------
# Script by ThioJoe - https://github.com/ThioJoe

DecksLabs

#!/bin/bash
set -e -o errexit -o pipefail -o nounset

###################################
# This script can be used by itself, but it's recommended that you read
# a tutorial on Proxmox forum first: https://forum.proxmox.com/threads/hey-proxmox-community-lets-talk-about-resources-isolation.124256/
###################################

# Do not modify these variables (set by Proxmox when calling the script)
vmId="$1"