georgeh

alias: Run Fans Based on Indoor AQI
description: ""
trigger:
  - platform: numeric_state
    entity_id: sensor.indoor_aqi
    below: 50
    id: aqi_1
  - platform: numeric_state
    entity_id: sensor.indoor_aqi
    above: 50

jamesmacwhite

Workarounds for Netflix and the blocking of Hurricane Electric IPv6 tunnels

The dreaded "You seem to be using an unblocker or proxy." error message. Cool story bro.

This gist was essentially created out of my own rant about Netflix being hostile to IPv6 tunnel services since June 2016. You are welcome to read my opinion on the matter, this is the more technical side to the issue and how to combat it within your own network.

Since I wrote this, various GitHub users have contributed their thoughts and ideas which has been incorporated into this gist. Thank you to everyone who have contributed their own methods and implementations.

The problem

Netflix now treats IPv6 tunnel brokers (such as Hurricane Electric) as proxy servers. A while ago it became apparent to users and Netflix that somewhat by accident, IPv6 tunnel users were being served content outside of their geolocation because of the way Netflix was identifyi

jperkin

Intro

This documents my setup of a SmartOS server as my PPPoE router, providing DNS/DHCP services to the local network.

Basic setup:

• DSL modem (VMG1312) in bridge mode handling the DSL connection
• 192.168.1.0/24 local network
• 192.168.1.5 will be the IP address of the router zone
• e1000g0 is the configured internal 'admin' interface

jayeye

My ISP (Time Warner Cable) hands out IPv6 addresses with DHCPv6; it will delegate a /56 if asked. So long as I keep refreshing the lease, it won't renumber me. I have my cable modem set to bridge, and do all the firewalling, NATing, etc., on a Debian box. In what follows, eth0 is the internal interface.

The dhclient that ships with debian/ubuntu does not support asking for a prefix delegation, so I had to build one from sources.

• Get the ISC dhcp source.

TyrfingMjolnir

class "Apple-Intel-Netboot" {
	# Limit this class to only Intel Apple machines
	match if substring (option vendor-class-identifier, 0, 14) = "AAPLBSDPC/i386";
	option dhcp-parameter-request-list 1,3,17,43,60; # Send these options to the client (possibly forcing it, if the client didn't request it)
							# From: http://www.iana.org/assignments/bootp-dhcp-parameters/bootp-dhcp-parameters.xml
							# 1 - Subnet Mask
							# 3 - Router
							# 17 - Root Path
							# 43 - Vendor Specific
							# 60 - Class ID

jesperronn

Converting a Word Document to Markdown in One Move

The Problem

A lot of important government documents are created and saved in Microsoft Word (*.docx). But Microsoft Word is a proprietary format, and it's not really useful for presenting documents on the web. So, I wanted to find a way to convert a .docx file into markdown.

Installing Pandoc

On a mac you can use homebrew by running the command brew install pandoc.

The Solution

jamtur01

These are the Kickstarter Engineering and Data role definitions for both teams.

Technical	Data	People
Junior Software Engineer
Software Engineer	Data Analyst
Senior Software Engineer	Data Scientist	Engineering Manager
Staff Engineer	VP of Data	Engineering Director
Principal Engineer		CTO

albertbori

Overview

This is a bash script that will automatically turn your wifi off if you connect your computer to an ethernet connection and turn wifi back on when you unplug your ethernet cable/adapter. If you decide to turn wifi on for whatever reason, it will remember that choice. This was improvised from this mac hint to work with Yosemite, and without hard-coding the adapter names. It's supposed to support growl, but I didn't check that part. I did, however, add OSX notification center support. Feel free to fork and fix any issues you encounter.

Most the credit for these changes go to Dave Holland.

Requirements

• Mac OSX 10+
• Administrator privileges

staltz

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

---

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

---

kyledrake

# The blog post that started it all: https://neocities.org/blog/the-fcc-is-now-rate-limited
#
# Current known FCC address ranges:
# https://news.ycombinator.com/item?id=7716915
#
# Confirm/locate FCC IP ranges with this: http://whois.arin.net/rest/net/NET-165-135-0-0-1/pft
#
# In your nginx.conf:

location / {