Vertecedoc4545

Building on Ubuntu 23.04

You have 2 options, use the script descrived bellow or follow the instrutions

script in this gist if you want the source code

wget https://gist.githubusercontent.com/Vertecedoc4545/6e54487f07a1888b656b656c0cdd9764/raw/2c5e8ccb428fc331307e2f653cab88174c051310/build-ubuntu-23.sh
chmod +x build-ubuntu-23.sh
./build-ubuntu-23.sh

cristaloleg

# See: https://olegk.dev/go-linters-configuration-the-right-version

run:
  # Depends on your hardware, my laptop can survive 8 threads.
  concurrency: 8

  # I really care about the result, so I'm fine to wait for it.
  timeout: 30m

  # Fail if the error was met.

kulti

# Comments started with [!] are explanations of my workflow with golangci-lint.
# Another comments are real comments in my config. 

# [!] Examine the https://golangci-lint.run/usage/configuration/ to know all possibilities.
run:
  timeout: 5m
  modules-download-mode: vendor # [!] if you are using vendoring
  build-tags:
    - integration # [!] If you disable code for integration tests to run all unit tests, enable it to lint all the same. 
  

maratori

# This code is licensed under the terms of the MIT license https://opensource.org/license/mit
# Copyright (c) 2021 Marat Reymers

## Golden config for golangci-lint v1.59.1
#
# This is the best config for golangci-lint based on my experience and opinion.
# It is very strict, but not extremely strict.
# Feel free to adapt and change it for your needs.

run:

andrebrait

Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.

Note: many newer Keychron keyboards use QMK as firmware and most tips here do not apply to them. Maybe the ones related to Bluetooth can be useful, but everything related to Apple's keyboard module (hid_apple) on Linux, won't work. As far as I know, all QMK-based boards use the hid_generic module instead. Examples of QMK-based boards are: Q, Q-Pro, V, K-Pro, etc.

Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.

Make Fn + F-keys work (NOT FOR QMK-BASED BOARDS)

Older Keychron keyboards (those not based on QMK) use the hid_apple driver on Linux, even in the Windows/Android mode, both in Bluetooth and Wired modes.

ChristopherA

Brew Bundle Brewfile Tips

Copyright & License

Unless otherwise noted (either in this file or in a file's copyright section) the contents of this gist are Copyright ©️2020 by Christopher Allen, and are shared under spdx:Creative Commons Attribution Share Alike 4.0 International (CC-BY-SA-4.) open-source license.

Sponsor

If you more tips and advice like these, you can become a monthly patron on my GitHub Sponsor Page for as little as $5 a month; and your contributions will be multipled, as GitHub is matching the first $5,000! This gist is all about Homebrew, so if you like it you can support it by donating to them or becoming one of their Github Sponsors.

ricealexander

A list of GitHub emoji markup, adapted from rxavier’s Complete list of github markdown emoji markup, generated with a Grunt script for maintainability (see repository).

Table of Contents

Smileys and People
Animals and Nature
Food and Drink
Activity
Travel and Places
Objects

erlepereira

Assuming a Properly configured DNSMasq

a quickstart for dnsmasq is given at the end if you have not set it up yet.

---

something like this will add a great regularly updated malware file for it to use. More security and privacy to you! Specifically, this uses https://github.com/StevenBlack/hosts Choose one of the Raw Hosts file from there to use.

To setup DNSMasq, follow the below ...

wget -O- https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts | awk '$1 == "0.0.0.0" { print "address=/"$2"/0.0.0.0/"}' > /etc/dnsmasq.d/malware.conf`

mjackson

#!/bin/sh

# This script should be saved in a git repo as a hook file, e.g. .git/hooks/pre-receive.
# It looks for scripts in the .git/hooks/pre-receive.d directory and executes them in order,
# passing along stdin. If any script exits with a non-zero status, this script exits.

script_dir=$(dirname $0)
hook_name=$(basename $0)

hook_dir="$script_dir/$hook_name.d"

umpirsky

input:not(.tactile-searchbox-input):not(.urlbar-input):not(.textbox-input):not(.form-control):not([type='checkbox']) {
    -moz-appearance: none !important;
    background-color: white;
    color: black;
}

#downloads-indicator-counter {
    color: white;
}