Skip to content

Instantly share code, notes, and snippets.

View cfstras's full-sized avatar

Claus F. Strasburger cfstras

  • Düsseldorf, Germany
  • 08:27 (UTC +02:00)
View GitHub Profile
@superseb
superseb / rke2-commands.md
Last active May 7, 2024 00:38
RKE2 commands

RKE2 commands

Install

curl -sL https://get.rke2.io | sh
systemctl daemon-reload
systemctl start rke2-server
@rgreenjr
rgreenjr / postgres_queries_and_commands.sql
Last active May 6, 2024 12:37
Useful PostgreSQL Queries and Commands
-- show running queries (pre 9.2)
SELECT procpid, age(clock_timestamp(), query_start), usename, current_query
FROM pg_stat_activity
WHERE current_query != '<IDLE>' AND current_query NOT ILIKE '%pg_stat_activity%'
ORDER BY query_start desc;
-- show running queries (9.2)
SELECT pid, age(clock_timestamp(), query_start), usename, query
FROM pg_stat_activity
WHERE query != '<IDLE>' AND query NOT ILIKE '%pg_stat_activity%'
@gbaman
gbaman / HowToOTG.md
Last active May 2, 2024 01:27
Simple guide for setting up OTG modes on the Raspberry Pi Zero

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

@gbaman
gbaman / HowToOTGFast.md
Last active May 1, 2024 08:26
Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

@killercup
killercup / pandoc.css
Created July 3, 2013 11:31
Add this to your Pandoc HTML documents using `--css pandoc.css` to make them look more awesome. (Tested with Markdown and LaTeX.)
/*
* I add this to html files generated with pandoc.
*/
html {
font-size: 100%;
overflow-y: scroll;
-webkit-text-size-adjust: 100%;
-ms-text-size-adjust: 100%;
}
@jbenet
jbenet / current_utc_time.c
Created July 17, 2011 16:17
work around lack of clock_gettime in os x
/*
author: jbenet
os x, compile with: gcc -o testo test.c
linux, compile with: gcc -o testo test.c -lrt
*/
#include <time.h>
#include <sys/time.h>
#include <stdio.h>
@cfstras
cfstras / _lima-on-m1.md
Last active January 30, 2024 17:11
Lima M1

Note (2024): I've used this for a while to get a reasonably workable Docker installation on my M1 MacBook. For simplicity I use colima nowadays. The setup below should still work though.


  1. Install lima
    brew install lima
@innovia
innovia / kubernetes_add_service_account_kubeconfig.sh
Last active January 29, 2024 23:00
Create a service account and generate a kubeconfig file for it - this will also set the default namespace for the user
#!/bin/bash
set -e
set -o pipefail
# Add user to k8s using service account, no RBAC (must create RBAC after this script)
if [[ -z "$1" ]] || [[ -z "$2" ]]; then
echo "usage: $0 <service_account_name> <namespace>"
exit 1
fi
@endolith
endolith / Readme.txt
Last active September 23, 2023 11:04
Gnome to Wine color scraper
This is a Python script to extract GNOME/GTK's color scheme and apply it to Wine, so that the themes (approximately) match.
Instructions:
1. Set your Gnome theme as you would like it
2. Run with a command like "python wine_colors_from_gtk.py"
3. Restart any apps running in Wine. They should match the Gnome theme colors now.
Better description with screenshots here: http://www.endolith.com/wordpress/2008/08/03/wine-colors/
This is also stored on https://code.launchpad.net/~endolith/+junk/wine-color-scraper
@cjus
cjus / jsonval.sh
Created June 26, 2011 17:42
Extract a JSON value from a BASH script
#!/bin/bash
function jsonval {
temp=`echo $json | sed 's/\\\\\//\//g' | sed 's/[{}]//g' | awk -v k="text" '{n=split($0,a,","); for (i=1; i<=n; i++) print a[i]}' | sed 's/\"\:\"/\|/g' | sed 's/[\,]/ /g' | sed 's/\"//g' | grep -w $prop`
echo ${temp##*|}
}
json=`curl -s -X GET http://twitter.com/users/show/$1.json`
prop='profile_image_url'
picurl=`jsonval`