chaeplin

#!/bin/sh

## you'll have to do a couple extra steps to get this running
## there are probably other ways to handle svncanboot, but this is from the linux forum

set -e

if
   touch /etc/_testr_file
then

chaeplin

#include <SPI.h>

#include "nRF24L01.h"

#include "RF24.h"

int senderId;

// Set up nRF24L01 radio on SPI bus plus pins 9 & 10
//Contacts from the radio to connect NRF24L01 pinamnam -> Arduino

chaeplin

#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>

#define DEVICE_ID 2
#define CHANNEL 1 //MAX 127
RF24 radio(15, 15);                // Set up nRF24L01 radio on SPI bus plus pins 7 & 8

// Topology
const uint64_t pipes[2] = { 0xFFFFFFFFFFLL, 0xCCCCCCCCCCLL };

chaeplin

#define TRIAC_PIN       5
#define ZERO_CROSS_PIN  4
#define DEBOUNCE_TIME   9000 //9ms - 10ms is the pulse period

static uint32_t lastPulse = 0;
static uint16_t period    = 5000; //5ms - 50% for each half wave

void ICACHE_RAM_ATTR onTimerISR(){
  if(GPIP(TRIAC_PIN)){//OUTPUT is HIGH
    GPOC = (1 << TRIAC_PIN);//low

chaeplin

struct spiffs_helper_t {
  
  File f;
  spiffs_helper_t(const char * _path ) {
    f = SPIFFS.open(_path, "r+"); // try to open if there... for read and write
    if (!f) {
      f = SPIFFS.open(_path, "w+"); // if fail open for read/write but new
    }
  };

chaeplin

function video-upload() {
  if [ $# -lt 1 ]; then
    echo "[ERROR] Missing required file name."
  else
    FILESIZE=$(wc -c "$1" | awk '{print $1}')
    printf "[START] Uploading $FILESIZE bytes.\n"
    MEDIAID=$(twurl /1.1/media/upload.json -H upload.twitter.com -d "command=INIT&media_category=amplify_video&media_type=video/mp4&total_bytes=$FILESIZE" | jq .media_id_string | sed 's/\"//g')

    INDEX=0
    split -b 5m $1 twitter-video-

chaeplin

user www-data;
worker_processes 1;
pid /var/run/nginx.pid;

events {
    worker_connections 1024;
}

http {
    sendfile on;

chaeplin

    if ($request_uri = /) { 
      set $test  A; 
    } 
  
    if ($host ~* teambox.com) { 
      set $test  "${test}B"; 
    } 
  
    if ($http_cookie !~* "auth_token") { 
      set $test  "${test}C"; 

chaeplin

/*
 *  This sketch sends ads1115 current sensor data via HTTP POST request to thingspeak server.
 *  It needs the following libraries to work (besides the esp8266 standard libraries supplied with the IDE):
 *
 *  - https://github.com/adafruit/Adafruit_ADS1X15
 *
 *  designed to run directly on esp8266-01 module, to where it can be uploaded using this marvelous piece of software:
 *
 *  https://github.com/esp8266/Arduino
 *

chaeplin

'''
This is an example of how to send data to Slack webhooks in Python with the
requests module.
Detailed documentation of Slack Incoming Webhooks:
https://api.slack.com/incoming-webhooks

'''

import json
import requests