| #!/bin/sh | |
| ### | |
| # SOME COMMANDS WILL NOT WORK ON macOS (Sierra or newer) | |
| # For Sierra or newer, see https://github.com/mathiasbynens/dotfiles/blob/master/.macos | |
| ### | |
| # Alot of these configs have been taken from the various places | |
| # on the web, most from here | |
| # https://github.com/mathiasbynens/dotfiles/blob/5b3c8418ed42d93af2e647dc9d122f25cc034871/.osx |
| # Last updated May, 2024 for Apple silicon Macs | |
| # Install Homebrew if you don't already have it: https://brew.sh | |
| # install nano from homebrew | |
| brew install nano nanorc | |
| # update your nanorc file | |
| echo 'include "'"$(brew --cellar nano)"'/*/share/nano/*.nanorc"' >> ~/.nanorc | |
| # close and re-open your terminal and you'll have syntax highlighting |
| adb shell am | |
| usage: am [subcommand] [options] | |
| usage: am start [-D] [-W] [-P <FILE>] [--start-profiler <FILE>] | |
| [--R COUNT] [-S] [--opengl-trace] <INTENT> | |
| am startservice <INTENT> | |
| am force-stop <PACKAGE> | |
| am kill <PACKAGE> | |
| am kill-all | |
| am broadcast <INTENT> | |
| am instrument [-r] [-e <NAME> <VALUE>] [-p <FILE>] [-w] |
This guide will take you from zero webserver knowledge, to having your own free site hosted on GitHub. The only non-free bit is registering a domain name, which can be as cheap as $5/year.
This guide uses CrazyDomains as the Registrar, FreeDNS as the DNS, and GitHub as the Webserver.
(Serial port or com port? - Serial ports are often refered as COM ports. It is the same to be short. You can read abut it in the Wiki article )
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
| # Pi3 overclock! https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=138123 | |
| gpu_mem=16 # set as desired | |
| dtparam=sd_overclock=100 | |
| arm_freq=1300 | |
| core_freq=500 | |
| over_voltage=4 | |
| sdram_freq=575 | |
| sdram_schmoo=0x02000020 | |
| over_voltage_sdram_p=6 | |
| over_voltage_sdram_i=4 |
| # Stop all containers | |
| docker stop `docker ps -qa` | |
| # Remove all containers | |
| docker rm `docker ps -qa` | |
| # Remove all images | |
| docker rmi -f `docker images -qa ` | |
| # Remove all volumes |
| #!/usr/bin/env bash | |
| # Pi-hole: A black hole for Internet advertisements | |
| # (c) 2017 Pi-hole, LLC (https://pi-hole.net) | |
| # Network-wide ad blocking via your own hardware. | |
| # | |
| # Installs Pi-hole | |
| # | |
| # This file is copyright under the latest version of the EUPL. | |
| # Please see LICENSE file for your rights under this license. |
| adb help // List all comands | |
| == Adb Server | |
| adb kill-server | |
| adb start-server | |
| == Adb Reboot | |
| adb reboot | |
| adb reboot recovery | |
| adb reboot-bootloader |