Skip to content

Instantly share code, notes, and snippets.

@dixyes
dixyes / Readme.md
Last active May 6, 2024 14:22
ASUS ROG Zephyrus G14 2022 GA402RJ pci passthrough

ASUS ROG Zephyrus G14 2022 GA402RJ pci passthrough

This is a record for my own passthrough setup, I can finally use a single laptop for windows gaming and linux programming at the same time.

The device

My G14 is GA402RJ(6800HS + 6700s) with MT7922 WiFi/BT card.

At this time, BIOS version is 309.

@luna-koury
luna-koury / # Vuex 4 -> Vue3 & TS.md
Last active April 6, 2022 13:32
Vuex 4 - Boilerplate Typescript

Vuex 4 boilerplate using Vue3 and typed modules with TypeScript

With Modules

📦src
 ┣ 📂store
 ┃ ┣ 📂modules
 ┃ ┃ ┗ 📂generic_module
 ┃ ┃ ┃ ┣ 📜actions.ts
 ┃ ┃ ┃ ┣ 📜getters.ts
 ┃ ┃ ┃ ┣ 📜index.ts
@braun-steven
braun-steven / lily58-keyboard.org
Created August 12, 2019 22:52
Lily58 Pro Parts List
@Jiab77
Jiab77 / bridged-networking-on-wireless-interface-with-kvm.md
Last active June 14, 2024 07:49
Bridged Networking on Wireless Interface with KVM and more...

Bridged Networking on Wireless Interface with KVM and more...

So I needed to upgrade my home "web hosting" server from a Raspberry Pi 3b to something more flexible where I could even simulate a Raspberry Pi 3b given power. The new server hardware is now an Intel NUC i7 16GB / 250Gb SSD NVME. 😁

I order to accomplish this task I had to find a way to bridge the wireless interface which is the faster one on my actual home network setup.

I've also tried to mix the functionnality from another Rapsberry Pi (3b+ this time) who's acting as WLAN to LAN bridge. More details on this setup. But this was finally a bad idea and I was not able to make it work along the virtual network bridge created by libvirt or manually created... (I will explain why later)

The main difficulty was to use the DMZ IP address given by the router and route the traffic to the guest VM's.

Server / Desktop

@dsmrt
dsmrt / query-aws-logs-insights.bash
Last active May 16, 2024 16:38
Using AWS CLI to query CloudWatch Logs with Insights. Looking -30 mins to now.
# this script queries aws logs with insights filtering on ERROR
# explanation of start and end times
#--start-time = unix timestamp 30 mins in the past
#--end-time = unix timestamp now
QUERY_ID=$(aws logs start-query \
--profile $profile \
--log-group-name /aws/lambda/aap-event-consumer-dev \
--start-time `date -v-30M "+%s"` \

How to setup AWS lambda function to talk to the internet and VPC

I'm going to walk you through the steps for setting up a AWS Lambda to talk to the internet and a VPC. Let's dive in.

So it might be really unintuitive at first but lambda functions have three states.

  1. No VPC, where it can talk openly to the web, but can't talk to any of your AWS services.
  2. VPC, the default setting where the lambda function can talk to your AWS services but can't talk to the web.
  3. VPC with NAT, The best of both worlds, AWS services and web.