gistfile1.txt

*******************
Selected Line Name:  Tower 1; Circuit 1
*******************
As an aid in setting distance relays, the worst case positive
sequence line impedance, assuming untransposed phases, is:
0.0357 +j 0.1484 Ohms, or 0.1527 Ohms @ 76.47 degrees.
A zone 1 reach set to this value will not overreach the line.
 
Length: 0.41 miles
Surge impedance: 192.80 ohms   Loading: 98.777 MW
 
Two Port Data (shunt values are for entire line)
                   -----------------Per Unit------------------
                    Series R   Series X   Shunt G    Shunt B
                   ---------- ---------- ---------- ----------
 Positive Seq New     0.00018    0.00086    0.00000    0.00085
 
 Negative Seq New     0.00018    0.00086    0.00000    0.00085
 
 Zero Seq New         0.00097    0.00340    0.00000    0.00039
 
Mutuals for PRIMARY line: Tower 1; Circuit 1
        and COUPLED line: Tower 1; Circuit 2
                   ------------Per Unit------------
                    Series R   Series X   Shunt B       B1        B2        B3        B4
                   ---------- ---------- ---------- --------- --------- --------- ---------
 Zero Seq New         0.00072    0.00233   -0.00016   0.00000   1.00000   0.00000   1.00000
 
*******************
Selected Line Name:  Tower 1; Circuit 2
*******************
As an aid in setting distance relays, the worst case positive
sequence line impedance, assuming untransposed phases, is:
0.0558 +j 0.1368 Ohms, or 0.1478 Ohms @ 67.81 degrees.
A zone 1 reach set to this value will not overreach the line.
 
Length: 0.41 miles
Surge impedance: 179.33 ohms   Loading: 106.198 MW
 
Two Port Data (shunt values are for entire line)
                   -----------------Per Unit------------------
                    Series R   Series X   Shunt G    Shunt B
                   ---------- ---------- ---------- ----------
 Positive Seq New     0.00029    0.00077    0.00000    0.00093
 
 Negative Seq New     0.00029    0.00077    0.00000    0.00093
 
 Zero Seq New         0.00097    0.00400    0.00000    0.00036
 
Mutuals for PRIMARY line: Tower 1; Circuit 2
        and COUPLED line: Tower 1; Circuit 1
                   ------------Per Unit------------
                    Series R   Series X   Shunt B       B1        B2        B3        B4
                   ---------- ---------- ---------- --------- --------- --------- ---------
 Zero Seq New         0.00072    0.00233   -0.00016   0.00000   1.00000   0.00000   1.00000