nrollr

# UPDATED 17 February 2019
# Redirect all HTTP traffic to HTTPS
server {
   listen 80;
   listen [::]:80; 	
   server_name www.domain.com domain.com;
   return 301 https://$host$request_uri;
}

# SSL configuration

FreeTymeKiyan

HOST=YOUR_ES_HOST
PORT=YOUR_ES_PORT
TO_NODE=DESTINATION_NODE_NAME

curl "http://$HOST:$PORT/_cat/shards" | grep UNAS | awk '{print $1,$2}' | while read var_index var_shard; do 
  curl -XPOST "http://$HOST:$PORT/_cluster/reroute" -d "
    { 
      \"commands\" : [ 
        { 
          \"allocate\" : 

trungv0

# install haproxy
yum install -y haproxy

# config haproxy for rabbitmq
cat > /etc/haproxy/haproxy.cfg << "EOF"
global
  log 127.0.0.1 local0 notice

  maxconn 10000
  user haproxy

darrenpmeyer

#!/usr/bin/env bash
## NOTE! OpenConnect is now on Version 8, and this is only for historical use
##       See https://gist.github.com/darrenpmeyer/1a56d0d4817352998fe9d7cfe5a79684 for new script

oc_ver="7.08"

echo "Autobuild OpenConnect $oc_ver"
echo " "
echo "This script uses apt-get and make install via sudo rights"
echo "To simplify this, we're going to use sudo -v to pre-authenticate you"

DavidWittman

You can find the MAC address for LAN1/eth0 (not the BMC MAC) via the SuperMicro IPMI interface by running the following command:

$ ipmitool -U $IPMI_USER -P $IPMI_PASS -H $IPMI_HOST raw 0x30 0x21 | tail -c 18

The eth0 MAC address will be output in this format:

00 25 90 f0 be ef

trident523

  upstream discourse {
  #fail_timeout is optional; I throw it in to see errors quickly
    server 127.0.0.1:4578 fail_timeout=5;
  }
 
  # configure the virtual host
  server {
    # replace with your domain name
    server_name discourse.example.com;
 

gavinhungry

#
# Name: nginx-tls.conf
# Auth: Gavin Lloyd <gavinhungry@gmail.com>
# Desc: Nginx SSL/TLS configuration for "A+" Qualys SSL Labs rating
#
# Enables HTTP/2, PFS, HSTS and OCSP stapling. Configuration options not related
# to SSL/TLS are not included here.
#
# Additional tips:
#

taf2

# fireway configured with: http://major.io/2007/07/01/active-ftp-connections-through-iptables/

require 'net/ftp'
require 'stringio'

# allows us to upload files by content instead of writing to disk first
class Net::FTP
  def puttextcontent(content, remotefile, &block)
    f = StringIO.new(content)
    begin

blt04

Cucumber JSON Expanded formatter

This is similar to the built-in Cucumber JSON formatter except it expands scenario outlines so each row is reported with its result. Thus, scenario outlines appear similar to regular scenarios in the JSON output.

This supports regular mode and "--expand" mode. In both cases, scenario outline tables are expanded (however the underlying logic for doing the expansion varies greatly).

willurd

Each of these commands will run an ad hoc http static server in your current (or specified) directory, available at http://localhost:8000. Use this power wisely.

Discussion on reddit.

Python 2.x

$ python -m SimpleHTTPServer 8000