Jomy10

Calling a Rust library from Swift

This gist shows a quick overview of calling Rust in a Swift project, with Swift Package Manager configured.

Let's go ahead and create a folder containing all our sources:

mkdir swift-rs && cd $_

zenofile

#!/usr/bin/env bash
# vi: set ft=sh ts=4 sw=0 sts=-1 sr noet nosi tw=0 fdm=manual:

set -o errexit

declare -A version

version[musl]=1.2.4
version[libevent]=2.1.12
version[ncurses]=6.4

fscm

[macOS] Install CMake

Instructions on how to install the CMake tool on macOS.

Uninstall

First step should be to unsinstall any previous CMake installation. This step can be skipped if no CMake version was previously installed.

To uninstall any previous CMake installations use the following commands:

phelipetls

" ~/.vim/after/syntax/python.vim or ~/.config/nvim/after/syntax/python.vim
syn match pythonEscape +{{+ contained containedin=pythonfString,pythonfDocstring
syn match pythonEscape +}}+ contained containedin=pythonfString,pythonfDocstring

syn region pythonfString matchgroup=pythonQuotes
      \ start=+[fF]\@1<=\z(['"]\)+ end="\z1"
      \ contains=@Spell,pythonEscape,pythonInterpolation
syn region pythonfDocstring matchgroup=pythonQuotes
      \ start=+[fF]\@1<=\z('''\|"""\)+ end="\z1" keepend
      \ contains=@Spell,pythonEscape,pythonSpaceError,pythonInterpolation,pythonDoctest

AndrewLipscomb

How to set up static nspawn IP address networking without a bridge

Note - this article assumes you have reasonable familiarity with systemd, networkd and nspawn/machinectl

What is this guide for

There seem to be a lot of references on the internet for nspawn networking with a bridge - but not on simply using the stock veth networking with static addresses. The default behaviour of nspawn (as of 24/03/20 and systemd:245 on Arch) is to:

• Make a virtual ethernet port on the host (defined by /lib/systemd/network/80-container-ve.network)
• Make a virtual ethernet port in the container (defined by /lib/systemd/network/80-container-host0.network)
• Based on those configurations, serve the host port a random IP from the local network ranges with a 28 bit subnet, and a DHCP server for the host port serves a random IP in the subnet to the container

ruanbekker

AddOn:

• https://addons.mozilla.org/en-US/firefox/addon/tree-style-tab/

1. Go to about:support in your address bar
2. Look for your profiles directory and open it:

3. Create a file named chrome/userChrome.css in your profile directory:

huntrar

Arch Linux Full-Disk Encryption Installation Guide

This guide provides instructions for an Arch Linux installation featuring full-disk encryption via LVM on LUKS and an encrypted boot partition (GRUB) for UEFI systems.

Following the main installation are further instructions to harden against Evil Maid attacks via UEFI Secure Boot custom key enrollment and self-signed kernel and bootloader.

Preface

You will find most of this information pulled from the Arch Wiki and other resources linked thereof.

Note: The system was installed on an NVMe SSD, substitute /dev/nvme0nX with /dev/sdX or your device as needed.

stevejenkins

# Instructions for installing Pi-hole 4.2 on UniFi CloudKey Gen 1 (UC-CK) running firmware 0.13.6
# Pi-hole will need to be completely re-installed after every FW update or if CloudKey is reset to defaults.

# Verify UC-CK is running firmware v0.13.6 (or later) before installing Pi-hole. If not, do:
ubnt-systool fwupdate https://dl.ubnt.com/unifi/stage/cloudkey/firmware/UCK/UCK.mtk7623.v0.13.6.7ad551e.190225.0939.bin

# UC-CK firmware v0.13.6 downgrades UniFi Controller to 5.10.17. Upgrade to 5.10.19 with:
cd /tmp
wget https://dl.ubnt.com/unifi/5.10.19/unifi_sysvinit_all.deb
dpkg -i unifi_sysvinit_all.deb

mattifestation

[
    {
        "ProviderGUID":  "72d164bf-fd64-4b2b-87a0-62dbcec9ae2a",
        "ProviderName":  "AccEventTool",
        "ProviderGroupGUID":  "4f50731a-89cf-4782-b3e0-dce8c90476ba",
        "AssociatedFilenames":  [
                                    "accevent.exe",
                                    "inspect.exe",
                                    "narrator.exe",
                                    "srh.dll"

ddnomad

###############################################################################
# Author: ddnomad
# Version: 1.1.3
# Last Update: 2020-07-06
#
# External contributors:
#   - u/momasf (https://www.reddit.com/user/momasf) - an excellent
#     tip to use 'reflector' to speed up downloads during the base
#     installation
#   - eXhumer (https://github.com/eXhumer) - Fixes for things that