frk1

# 2017-10-01T14:14:44+00:00

108.175.32.0/20
108.175.34.0/24
108.175.35.0/24
192.173.64.0/18
198.38.100.0/24
198.38.101.0/24
198.38.108.0/24
198.38.109.0/24

chrismdp

# You don't need Fog in Ruby or some other library to upload to S3 -- shell works perfectly fine
# This is how I upload my new Sol Trader builds (http://soltrader.net)
# Based on a modified script from here: http://tmont.com/blargh/2014/1/uploading-to-s3-in-bash

S3KEY="my aws key"
S3SECRET="my aws secret" # pass these in

function putS3
{
  path=$1

dnsmichi

# cat 7560.conf 
object Host "7560-server" {
  import "test-generic-host"
  address = "127.0.0.1"
  check_command = "hostalive"

  vars.interfaces["eth0"] = {
  //vars.interfaces.eth0 = {
    "2dcoord" = "3,5"
    port = 1

dergachev

TLDR: I now add the following snippet to all my Dockerfiles:

# If host is running squid-deb-proxy on port 8000, populate /etc/apt/apt.conf.d/30proxy
# By default, squid-deb-proxy 403s unknown sources, so apt shouldn't proxy ppa.launchpad.net
RUN route -n | awk '/^0.0.0.0/ {print $2}' > /tmp/host_ip.txt
RUN echo "HEAD /" | nc `cat /tmp/host_ip.txt` 8000 | grep squid-deb-proxy \
  && (echo "Acquire::http::Proxy \"http://$(cat /tmp/host_ip.txt):8000\";" > /etc/apt/apt.conf.d/30proxy) \
  && (echo "Acquire::http::Proxy::ppa.launchpad.net DIRECT;" >> /etc/apt/apt.conf.d/30proxy) \
  || echo "No squid-deb-proxy detected on docker host"

rxaviers

People

:bowtie:	😄 :smile:	😆 :laughing:
😊 :blush:	😃 :smiley:	☺️ :relaxed:
😏 :smirk:	😍 :heart_eyes:	😘 :kissing_heart:
😚 :kissing_closed_eyes:	😳 :flushed:	😌 :relieved:
😆 :satisfied:	😁 :grin:	😉 :wink:
😜 :stuck_out_tongue_winking_eye:	😝 :stuck_out_tongue_closed_eyes:	😀 :grinning:
😗 :kissing:	😙 :kissing_smiling_eyes:	😛 :stuck_out_tongue:

pdeschen

#!/bin/sh
#
# <%=@service%>    This shell script takes care of starting and stopping
#                  the <%=@service%> service.
#
# chkconfig: 2345 65 35
# description: <%=@description%> 
#

SERVICE=<%=@service%>

bowsersenior

require 'rubygems'
require 'yaml'

# A demonstration of YAML anchors, references and handling of nested values
# For more info, see: 
#   http://atechie.net/2009/07/merging-hashes-in-yaml-conf-files/

stooges = YAML::load( File.read('stooges.yml') )
# =>  {
#             "default" => {