Skip to content

Instantly share code, notes, and snippets.

@disconnect3d
Forked from kholia/ASLR+vsyscall.rst
Created October 14, 2019 23:00
Show Gist options
  • Save disconnect3d/0ac4c2e97045f2f1d3a99ef1ed15c268 to your computer and use it in GitHub Desktop.
Save disconnect3d/0ac4c2e97045f2f1d3a99ef1ed15c268 to your computer and use it in GitHub Desktop.
Notes on ASLR and vsyscall page

Goals

This documents tries to address some concerns with enabling PIE.

Argument 1

One of the criticism of "Using PIE by default on AMD64" is,

The advantages of address space randomization on x86-64 are grossly exaggerated, given that the first 6 arguments are passed in registers (thus it is harder to construct the right arguments compared to say i386 where just some stack buffer overflow can lead to specifying both where to return to and what arguments should be passed to it) and because address space on x86-64 is never really randomized anyway (due to historical mistake, the vsyscall page is not randomized, so you can always return to vsyscall page if you can't easily return to libc or some other library).

See https://fedorahosted.org/fesco/ticket/1113#comment:10

Counter-argument 1

(all credit goes to #grsecurity guys, spender and pipacs for the detailed answers).

  • All of the useful instructions from the vsyscall page have been removed.

    In other words, in recent kernels it is not about the location of vsyscall but the contents and how those contents can be executed.

    The remaining code in the vsyscall page has simply been removed and replaced by a special trap instruction. An application trying to call into the vsyscall page will trap into the kernel, which will then emulate the desired virtual system call in kernel space. The result is a kernel system call emulating a virtual system call which was put there to avoid the kernel system call in the first place. The result is a "vsyscall" which takes a fraction of a microsecond longer to execute but, crucially, does not break the existing ABI. In any case, the slowdown will only be seen if the application is trying to use the vsyscall page instead of the vDSO.

    See http://lwn.net/Articles/446528/ and arch/x86/kernel/vsyscall_emu_64.S.

    These days the vsyscall page is stuffed with int3 instructions and the rest of the valid the rest of the valid code is probably too little to be useful as ROP gadgets. (needs confirmation).

  • ret2libc like attacks aren't useful since the calls supported by vsyscall mechanism are harmless. Namely,

    • __NR_gettimeofday
    • __NR_time
    • __NR_getcpu

    Nothing dangerous really.

  • vsyscall page is read-only. So we can't stuff code here for execution later.

    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 [vsyscall]

  • See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1018415

    vsyscall is an obsolete method (replaced by vdso) to do vast system calls. Because it is part of the linux x86-64 ABI, it always has to be mapped to a static address by the kernel.

    This means that in the case of a vulnerability (in some user program), an attacker making use of return oriented programming can rely on useful gadgets at a known address (bypassing ASLR.) Using the gadgets in vsyscall it is possible to get arbitrary code execution with only one trivial extra gadget (or in some cases none at all.) This is why recent kernels emulate the obsolete vsyscall ABI in-kernel. The emulation makes sure that an attacker can only call functions defined by the ABI, like gettimeofday(), and cannot, for example, directly jump to a syscall & ret gadget. Only calls to offsets defined in the ABI are allowed. In my opinion, backporting the new default behaviour of emulating vsyscall to LTS would increase the time / effort / skill needed for exploit writers to write a successful exploit somewhat, and make the resulting exploits less generic.

    NOTE: upstream kernels (even those of 2011 era) already have this fix.

  • See http://code.google.com/p/go/issues/detail?id=1933

    In Linux 3.1 (and later), the vsyscall is never faster than the syscall, and someone might want to run Go programs in vsyscall=none mode someday. (Any distribution with new enough glibc will already work in vsyscall=none mode, and even older distributions are mostly functional).

    (This was the state in Dec 2011, things should be better now).

    Furthermore, vsyscall stays at the fixed address but it can be mapped as non-executable (via a sysctl setting). when there's an exec attempt in one of the few entry points in there, the kernel's page fault handler will recognize the special fault address and emulate the behaviour by redirecting the code to the intended syscall. so calling stuff in the vsyscall page becomes a slow way to executing those syscalls. (pipacs, paraphrased).

  • There'll be an performance impact but only for apps that actually still use the vsyscall page.

    NOTE: syscall=emulate is default and no one seems to be complaining. So this performance argument is moot.

Argument 2

Some of the criticism of "Using PIE by default on AMD64" are,

The most important for security is properly written code, then measures that prevent exploits (-D_FORTIFY_SOURCE=2, -fsanitize=address, -fmudflap, SELinux), and only then measures that make exploits less likely to succeed (address space randomization).

SELINUX is a far far better security benefit than PIE, so we eat the cost there. PIE is not a big enough benefit to counter that.

PIE security benefits are not so important as counter its cost.

On brute-forcing ASLR on AMD64,

On forking servers it is very much possible to break ASLR because after the fork the address space is always the same so you can try multiple times.

Counter-argument 2

  • Effective security involves multiple-layers. It is not just a single layer or a single technique.
  • If a security measure is not 100% fool-proof it doesn't mean that we shouldn't' bother trying it. PIE already covers a bunch of forking servers. It would help ensure attacking Linux is more work than it's worth.
  • anti-bruteforcing measures can be implemented trivially in user-space to detect such brute-force attempts against ASLR (even for forking servers).

Summary

ASLR on AMD64 is quite effective.

$ uname -r
3.10.0-rc3

$ cat /etc/redhat-release
Fedora release 18 (Spherical Cow)

$ gcc --version
gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8)
...

32-bit

  • executable address : 8 bits of entropy
  • stack address : 11 bits of entropy
  • DSOs address : 8 bits of entropy

64-bit

TODO: Measure / estimate entropy provided by ASLR on AMD64. My machine has been trying to brute-force the ASLR space for days but it is HUGE. "XX" implies good enough ;)

  • executable address : XX bits of entropy
  • stack address : XX bits of entropy
  • DSOs address : XX bits of entropy

References

Favorite Lines

The irony is that the only examples I can think of that would really benefit from a 3% performance increase are the network servers that we already have on the mandatory list (apache, MariaDB, etc.) :-)

Notes

  • on ancient glibc

    $ objdump -d /lib64/libc-2.9.so | fgrep -A5 '<time>:'
    000000000008a510 <time>:
       8a510:       48 83 ec 08             sub    $0x8,%rsp
       8a514:       48 c7 c0 00 04 60 ff    mov    $0xffffffffff600400,%rax
       8a51b:       ff d0                   callq  *%rax
       8a51d:       48 83 c4 08             add    $0x8,%rsp
       8a521:       c3                      retq
    
  • on modern (Fedora 18) glibc

    objdump -d /lib64/libc-2.16.so |  fgrep -A25 '<time>:'
    0000003193cabef0 <time>:
      3193cabef0:   48 83 ec 28             sub    $0x28,%rsp
      3193cabef4:   48 8d 05 a1 a8 0c 00    lea    0xca8a1(%rip),%rax        # 3193d7679c <xdr_zero+0x3c>
      3193cabefb:   48 8d 3d a1 bd 0c 00    lea    0xcbda1(%rip),%rdi        # 3193d77ca3 <mallenv+0x83>
      3193cabf02:   48 89 e6                mov    %rsp,%rsi
      3193cabf05:   c7 44 24 0c 01 00 00    movl   $0x1,0xc(%rsp)
      3193cabf0c:   00
      3193cabf0d:   c7 44 24 08 f6 75 ae    movl   $0x3ae75f6,0x8(%rsp)
      3193cabf14:   03
      3193cabf15:   48 89 04 24             mov    %rax,(%rsp)
      3193cabf19:   48 c7 44 24 10 00 00    movq   $0x0,0x10(%rsp)
      3193cabf20:   00 00
      3193cabf22:   e8 99 2d 08 00          callq  3193d2ecc0 <_dl_vdso_vsym>
      3193cabf27:   48 c7 c2 00 04 60 ff    mov    $0xffffffffff600400,%rdx
      3193cabf2e:   48 85 c0                test   %rax,%rax
      3193cabf31:   48 0f 44 c2             cmove  %rdx,%rax
      3193cabf35:   48 83 c4 28             add    $0x28,%rsp
      3193cabf39:   c3                      retq
      3193cabf3a:   66 0f 1f 44 00 00       nopw   0x0(%rax,%rax,1)
    
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment