Skip to content

Instantly share code, notes, and snippets.

@Sebazzz
Sebazzz / ACrealityCR6Issue.md
Last active Jun 11, 2021
Creality CR-6 issue list (including listing of motherboard issues)
View ACrealityCR6Issue.md

Creality CR-6 issue list

This is an initiative to create an overview of the issues found with the Creality CR-6 SE.

As of this writing (2020-09-19) the large number of the motherboard issues have not been publicly acknowledged. Hopefully this overview forces Creality to acknowledge the issues with the Creality CR-6 SE leveling free 3d printer.

Update 2021-07-17 from Creality

According to Creality all issues should be resolved in the newer models:

Here are the improvements we did as below:

@faparicior
faparicior / end.gcode
Created Apr 28, 2020
Start and End G-code for Ender 3 on Cura
View end.gcode
; Ender 3 Custom End G-code
G4 ; Wait
M220 S100 ; Reset Speed factor override percentage to default (100%)
M221 S100 ; Reset Extrude factor override percentage to default (100%)
G91 ; Set coordinates to relative
G1 F1800 E-3 ; Retract filament 3 mm to prevent oozing
G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely
G90 ; Set coordinates to absolute
G1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal
M106 S0 ; Turn off cooling fan