natecj

How to use 1Password and 2FA with eTrade

IMPORTANT!
As of May 17, 2020, python-vipaccess stopped working for provisioning new Symantec VIP Access tokens (which was its raison d'être).
As of May 27, 2020, it's working again.
It might stop working again. and we might not be able to get it to work again (see #39)

Note: Your password cannot be more than 26 characters for you to use 2FA in general. eTrade makes you enter your 2FA code appened to your password to login and limits the length of password input to 32 characters, thus further restricting the maximum length of your actual password.

ahmetozer

ipv6_regex := `^(([0-9a-fA-F]{1,4}:){7,7}[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,7}:|([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|:((:[0-9a-fA-F]{1,4}){1,7}|:)|fe80:(:[0-9a-fA-F]{0,4}){0,4}%[0-9a-zA-Z]{1,}|::(ffff(:0{1,4}){0,1}:){0,1}((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])|([0-9a-fA-F]{1,4}:){1,4}:((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9]))$`
ipv4_regex := `^(((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)(\.|$)){4})`
domain_regex := `^(?:[a-z0-9](?:[a-z0-9-]{0,61}[a-z0-9])?\.)+[a-z0-9][a-z0-9-]{0,61}[a-z0-9]$`

match, _ := regexp.MatchString(ipv4_regex+`|`+ipv6_regex+`|`+domain_regex, host)
if match {
  fmt.Println("Input is valid")
} else {
  fmt.Println("Given input does not match")
  re

lcarsos

#!/usr/bin/env bash

# Usage: sudo ./restore_functionality.sh

#ps aux | grep sentinel | awk -F "  +" '{print $2}' | xargs kill
while true; do
    launchctl kill SIGKILL system/com.crowdstrike.falcond
    launchctl kill SIGKILL system/com.crowdstrike.userdaemon
    launchctl kill SIGKILL system/com.sentinelone.sentineld
    launchctl kill SIGKILL system/com.sentinelone.sentineld-helper

gweakliem

OKTA_DOMAIN= # e.g. example.okta.com
curl -d '{ "username":"$USERNAME","password":"$PASSWORD" }' -c cookie_jar.txt \
    -H "Content-Type: application/json" -b cookie_jar.txt -c cookie_jar.txt \
     https://$OKTA_DOMAIN/api/v1/authn > auth.json

{
  "stateToken": "00oBpbTzKnRdKLYvc8yNBdFTusuoS4KUhdANgrMsOt",
  "expiresAt": "2019-07-08T22:54:32.000Z",
  "status": "MFA_REQUIRED",
  "_embedded": {

laggardkernel

Comparison of ZSH frameworks and plugin managers

Changelog

• update 1: add a FAQ section
• update 2: benchmark chart and feature comparison table
• update 3:
  • improve the table with missing features for antigen
  • new zplg times result

TLDR

ThomasLeister

In case there's already a DHCP config for netplan for the private IP address:

File: /etc/netplan/50-cloud-init.yaml

Contents:

# This file is generated from information provided by
# the datasource.  Changes to it will not persist across an instance.
# To disable cloud-init's network configuration capabilities, write a file
# /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following:

gboudreau

Generating Authy passwords on other authenticators

---

*update: TBC, but this new might affect how easy it is to use this technique past August 2024: Authy is shutting down its desktop app | The 2FA app Authy will only be available on Android and iOS starting in August

---

This gist, based in part on a gist by Brian Hartvigsen, allows you to export from Authy your TOTP tokens you have stored there.
Those can be "standard" 6-digits / 30 secs tokens, or Authy's own version, the 7-digits / 10 secs tokens.

emilefraser

# Complete macOS Setup
# From clean install to fully configured.

# Step 1: Init Environment

#Temporarily Disable sudo Password Timeout

#The sudo password timeout is re-enabled at the end of this script. ##+BEGIN_SRC sh sudo tee /etc/sudoers.d/timeout > /dev/null <<-EOF Defaults timestamp_timeout=-1 EOF ##+END_SRC

##+BEGIN_SRC sh sudo tee /etc/sudoers.d/installer > /dev/null <<-EOF %admin ALL=(ALL) NOPASSWD:SETENV: /usr/sbin/installer EOF ##+END_SRC

matthewjberger

1.) Download a Nerd Font

2.) Unzip and copy to ~/.fonts

3.) Run the command fc-cache -fv to manually rebuild the font cache

thomasdarimont

Setup

Add this to your .profile, .bashrc, .zshrc...

decode_base64_url() {
  local len=$((${#1} % 4))
  local result="$1"
  if [ $len -eq 2 ]; then result="$1"'=='
  elif [ $len -eq 3 ]; then result="$1"'=' 
  fi
 echo "$result" | tr '_-' '/+' | openssl enc -d -base64