Sample setup Lighthouse with Lumen

app_bootstrap.php

<?php

require_once __DIR__.'/../vendor/autoload.php';

try {
    (new Dotenv\Dotenv(__DIR__.'/../'))->load();
} catch (Dotenv\Exception\InvalidPathException $e) {
    //
}

/*
|--------------------------------------------------------------------------
| Create The Application
|--------------------------------------------------------------------------
|
| Here we will load the environment and create the application instance
| that serves as the central piece of this framework. We'll use this
| application as an "IoC" container and router for this framework.
|
*/

$app = new Laravel\Lumen\Application(
    realpath(__DIR__.'/../')
);

// $app->withFacades(); No facades, woohoo
$app->withEloquent();

/*
|--------------------------------------------------------------------------
| Load configuration files.
|--------------------------------------------------------------------------
|
|
*/

$app->configure('app');
$app->configure('auth');
$app->configure('lighthouse');
$app->configure('lighthouse_subscriptions');
$app->configure('status_codes');


/*
|--------------------------------------------------------------------------
| Register Container Bindings
|--------------------------------------------------------------------------
|
| Now we will register a few bindings in the service container. We will
| register the exception handler and the console kernel. You may add
| your own bindings here if you like or you can make another file.
|
*/

$app->singleton(
    Illuminate\Contracts\Debug\ExceptionHandler::class,
    App\Exceptions\Handler::class
);

$app->singleton(
    Illuminate\Contracts\Console\Kernel::class,
    App\Console\Kernel::class
);

/*
|--------------------------------------------------------------------------
| Register Middleware
|--------------------------------------------------------------------------
|
| Next, we will register the middleware with the application. These can
| be global middleware that run before and after each request into a
| route or middleware that'll be assigned to some specific routes.
|
*/


$app->middleware([
    \Nord\Lumen\Cors\CorsMiddleware::class,
]);

$app->routeMiddleware([
    'auth' => App\Http\Middleware\Authenticate::class,
    'scopes' => Laravel\Passport\Http\Middleware\CheckScopes::class,
    'scope' => Laravel\Passport\Http\Middleware\CheckForAnyScope::class,
    'cors' => \Nord\Lumen\Cors\CorsMiddleware::class,
]);

if (!function_exists('config_path')) {
    function config_path($path = '')
    {
        return app()->basePath() . '/config' . ($path ? '/' . $path : $path);
    }
}
if (!function_exists('app_path')) {
    function app_path($path = '')
    {
        return app()->basePath() . '/app' . ($path ? '/' . $path : $path);
    }
}

/*
|--------------------------------------------------------------------------
| Register Service Providers
|--------------------------------------------------------------------------
|
| Here we will register all of the application's service providers which
| are used to bind services into the container. Service providers are
| totally optional, so you are not required to uncomment this line.
|
*/


$app->register(\App\Providers\AppServiceProvider::class);
$app->register(\App\Providers\AuthServiceProvider::class);
$app->register(\App\Providers\EventServiceProvider::class);
$app->register(\App\Providers\PassportServiceProvider::class);
$app->register(\Dusterio\LumenPassport\PassportServiceProvider::class);
$app->register(\Illuminate\Redis\RedisServiceProvider::class);
$app->register(\Illuminate\Broadcasting\BroadcastServiceProvider::class);
$app->register(\Nuwave\Lighthouse\Providers\LighthouseServiceProvider::class);
$app->register(\Nuwave\Lighthouse\Subscriptions\SubscriptionServiceProvider::class);

if ($app->environment() == 'local') {
    $app->register(Laravel\Tinker\TinkerServiceProvider::class);
    $app->register(Appzcoder\LumenRoutesList\RoutesCommandServiceProvider::class);
}


/*
|--------------------------------------------------------------------------
| Load The Application Routes
|--------------------------------------------------------------------------
|
| Next we will include the routes file so that they can all be added to
| the application. This will provide all of the URLs the application
| can respond to, as well as the controllers that may handle them.
|
*/

$app->router->group([
    'namespace' => 'App\Http\Controllers',
], function ($router) {
    require __DIR__.'/../routes/web.php';
});

return $app;

app_GraphQL_schema.json

# Just the basics: User with Images

scalar DateTime @scalar(class: "DateTime")

type User {
  id: ID! @globalId
  name: String
  email: String
  created_at: DateTime!
  updated_at: DateTime!
  last_login_at: DateTime!
  last_request_at: DateTime!
  images(orderBy: String): [Image!]! @paginate(type: "relay", model: "Image", scopes: ["orderAndFilter"])
}
type Image @model {
  id: ID! @globalId
  person: User! @belongsTo
  number: Float!
  filename: String
  active: Boolean
  created_at: DateTime!
}
type Query {
  viewer: User @auth
  images (orderBy: String): [Image!]! @paginate(type: "relay", model: "Image", scopes: ["orderAndFilter"])
}

app_Providers_AppServiceProvider.php

<?php

namespace App\Providers;

use Queue;
use Illuminate\Support\ServiceProvider;

class AppServiceProvider extends ServiceProvider
{
    /**
     * Register any application services.
     *
     * @return void
     */
    public function register()
    {
        //
    }

    //@TODO Remove me when a fix is implemented
    protected function loadRoutesFrom($location){
        return $location;
    }

}

app_Providers_AuthServiceProvider.php

<?php

namespace App\Providers;

use App\User;
use Carbon\Carbon;
use Illuminate\Support\ServiceProvider;
use Dusterio\LumenPassport\LumenPassport;
use Laravel\Passport\Passport;

class AuthServiceProvider extends ServiceProvider
{
    /**
     * Register any application services.
     *
     * @return void
     */
    public function register()
    {
        //
    }

    /**
     * Boot the authentication services for the application.
     *
     * @return void
     */
    public function boot()
    {
        // Here you may define how you wish users to be authenticated for your Lumen
        // application. The callback which receives the incoming request instance
        // should return either a User instance or null. You're free to obtain
        // the User instance via an API token or any other method necessary.
        LumenPassport::routes($this->app, ['prefix' => 'oauth']);
        LumenPassport::allowMultipleTokens();
        LumenPassport::tokensExpireIn(Carbon::now()->addDays(50));
        Passport::refreshTokensExpireIn(Carbon::now()->addDays(60));


        // Gates
        // Gate::define('update-post', function ($user, $post) {
        //     return $user->id === $post->user_id;
        // }); // if (Gate::allows('update-post', $post)) {

        // Policies
        // Gate::policy(Post::class, PostPolicy::class);

        Passport::tokensCan(['login', 'graphql']);

    }
}

app_Providers_PassportServiceProvider.php

<?php

namespace App\Providers;

use Carbon\Carbon;
use Dusterio\LumenPassport\LumenPassport;
use Illuminate\Auth\RequestGuard;
use Illuminate\Auth\Events\Logout;
use Laravel\Passport\Passport;
use Laravel\Passport\ClientRepository;
use Laravel\Passport\Guards\TokenGuard;
use Laravel\Passport\PassportServiceProvider as LaravelPassportServiceProvider;
use Laravel\Passport\TokenRepository;
use League\OAuth2\Server\ResourceServer;

class PassportServiceProvider extends LaravelPassportServiceProvider
{

    /**
     * Bootstrap the application services.
     *
     * @return void
     */
    public function boot()
    {
        // override key path, not needed if you're not using NixOS
        // Passport::$keyPath = '/run/keys';

        parent::boot();
    }


    /**
     * Register the token guard.
     *
     * @return void
     */
    protected function registerGuard()
    {
        app('auth')->extend('passport', function ($app, $name, array $config) {
            return tap($this->makeGuard($config), function ($guard) {
                $this->app->refresh('request', $guard, 'setRequest');
            });
        });
    }

    /**
     * Make an instance of the token guard.
     *
     * @param  array  $config
     * @return \Illuminate\Auth\RequestGuard
     */
    protected function makeGuard(array $config)
    {
        return new RequestGuard(function ($request) use ($config) {
            return (new TokenGuard(
                $this->app->make(ResourceServer::class),
                app('auth')->createUserProvider($config['provider']),
                $this->app->make(TokenRepository::class),
                $this->app->make(ClientRepository::class),
                $this->app->make('encrypter')
            ))->user($request);
        }, $this->app['request']);
    }

    /**
     * Register the cookie deletion event handler.
     *
     * @return void
     */
    protected function deleteCookieOnLogout()
    {
        // never needed since API's shouldn't use cookies AFAIK
//        $this->app['event']->listen(Logout::class, function () {
//            if ($this->app['request']->hasCookie(Passport::cookie())) {
//                $this->app['cookie']->queue($this->app['cookie']->forget(Passport::cookie()));
//            }
//        });
    }

}

composer.json

{
    "name": "wyw/api",
    "description": "The API for the Witness Your World platform",
    "keywords": ["wyw", "api", "platform"],
    "license": "MIT",
    "type": "project",
    "repositories": [
        {
            "type": "vcs",
            "url": "https://github.com/4levels/lumen-tinker" // just to update dependency version
        }
    ],
    "require": {
        "php": ">=7.1.3",
        "dusterio/lumen-passport": "^0.2.6",
        "illuminate/redis": "^5.6",
        "laravel/lumen-framework": "5.6.*",
        "laravel/passport": "~6.0.0",
        "nuwave/lighthouse": "dev-master",
        "nuwave/lighthouse-ws": "dev-master",
        "predis/predis": "^1.1",
        "vlucas/phpdotenv": "~2.2"
    },
    "require-dev": {
        "appzcoder/lumen-routes-list": "^1.0",
        "fzaninotto/faker": "~1.4",
        "laravel/tinker": "dev-master",
        "mockery/mockery": "~1.0",
        "phpunit/phpunit": "~7.0"
    },
    "autoload": {
        "psr-4": {
            "App\\": "app/"
        }
    },
    "autoload-dev": {
        "classmap": [
            "tests/",
            "database/"
        ]
    },
    "scripts": {
        "post-root-package-install": [
          "@php -r \"file_exists('.env') || copy('.env.example', '.env');\""
        ]
    },
    "minimum-stability": "dev",
    "prefer-stable": true,
    "config": {
        "preferred-install": "dist",
        "sort-packages": true,
        "optimize-autoloader": true
    }
}

config_auth.php

<?php

return [

    /*
    |--------------------------------------------------------------------------
    | Authentication Defaults
    |--------------------------------------------------------------------------
    |
    | This option controls the default authentication "guard" and password
    | reset options for your application. You may change these defaults
    | as required, but they're a perfect start for most applications.
    |
    */

    'defaults' => [
        'guard' => 'api',
        'passwords' => 'users',
    ],

    /*
    |--------------------------------------------------------------------------
    | Authentication Guards
    |--------------------------------------------------------------------------
    |
    | Next, you may define every authentication guard for your application.
    | Of course, a great default configuration has been defined for you
    | here which uses session storage and the Eloquent user provider.
    |
    | All authentication drivers have a user provider. This defines how the
    | users are actually retrieved out of your database or other storage
    | mechanisms used by this application to persist your user's data.
    |
    | Supported: "session", "token"
    |
    */

    'guards' => [
        'api' => [
            'driver' => 'passport',
            'provider' => 'users',
        ],
    ],

    /*
    |--------------------------------------------------------------------------
    | User Providers
    |--------------------------------------------------------------------------
    |
    | All authentication drivers have a user provider. This defines how the
    | users are actually retrieved out of your database or other storage
    | mechanisms used by this application to persist your user's data.
    |
    | If you have multiple user tables or models you may configure multiple
    | sources which represent each model / table. These sources may then
    | be assigned to any extra authentication guards you have defined.
    |
    | Supported: "database", "eloquent"
    |
    */

    'providers' => [
        'users' => [
            'driver' => 'eloquent',
            'model' => \App\User::class,
        ],
    ],

    /*
    |--------------------------------------------------------------------------
    | Resetting Passwords
    |--------------------------------------------------------------------------
    |
    | You may specify multiple password reset configurations if you have more
    | than one user table or model in the application and you want to have
    | separate password reset settings based on the specific user types.
    |
    | The expire time is the number of minutes that the reset token should be
    | considered valid. This security feature keeps tokens short-lived so
    | they have less time to be guessed. You may change this as needed.
    |
    'passwords' => [
        'users' => [
            'provider' => 'users',
            'table' => 'password_resets',
            'expire' => 60,
        ],
    ],
    */

];

config_hashing.php

<?php

return [

    /*
    |--------------------------------------------------------------------------
    | Default Hash Driver
    |--------------------------------------------------------------------------
    |
    | This option controls the default hash driver that will be used to hash
    | passwords for your application. By default, the bcrypt algorithm is
    | used; however, you remain free to modify this option if you wish.
    |
    | Supported: "bcrypt", "argon"
    |
    */

    'driver' => 'bcrypt',

];

config_jwt.php

<?php

/*
 * This file is part of jwt-auth.
 *
 * (c) Sean Tymon <tymon148@gmail.com>
 *
 * For the full copyright and license information, please view the LICENSE
 * file that was distributed with this source code.
 */

return [

    /*
    |--------------------------------------------------------------------------
    | JWT Authentication Secret
    |--------------------------------------------------------------------------
    |
    | Don't forget to set this, as it will be used to sign your tokens.
    | A helper command is provided for this: `php artisan jwt:generate`
    |
    */

    'secret' => env('JWT_SECRET', 'jasdflñjdslfjklrowqweupoi'),

    /*
    |--------------------------------------------------------------------------
    | JWT time to live
    |--------------------------------------------------------------------------
    |
    | Specify the length of time (in minutes) that the token will be valid for.
    | Defaults to 1 hour
    |
    */

    'ttl' => 60,

    /*
    |--------------------------------------------------------------------------
    | Refresh time to live
    |--------------------------------------------------------------------------
    |
    | Specify the length of time (in minutes) that the token can be refreshed
    | within. I.E. The user can refresh their token within a 2 week window of
    | the original token being created until they must re-authenticate.
    | Defaults to 2 weeks
    |
    */

    'refresh_ttl' => 20160,

    /*
    |--------------------------------------------------------------------------
    | JWT hashing algorithm
    |--------------------------------------------------------------------------
    |
    | Specify the hashing algorithm that will be used to sign the token.
    |
    | See here: https://github.com/namshi/jose/tree/2.2.0/src/Namshi/JOSE/Signer
    | for possible values
    |
    */

    'algo' => 'HS256',

    /*
    |--------------------------------------------------------------------------
    | User Model namespace
    |--------------------------------------------------------------------------
    |
    | Specify the full namespace to your User model.
    | e.g. 'Acme\Entities\User'
    |
    */

    'user' => 'App\User',

    /*
    |--------------------------------------------------------------------------
    | User identifier
    |--------------------------------------------------------------------------
    |
    | Specify a unique property of the user that will be added as the 'sub'
    | claim of the token payload.
    |
    */

    'identifier' => 'id',

    /*
    |--------------------------------------------------------------------------
    | Required Claims
    |--------------------------------------------------------------------------
    |
    | Specify the required claims that must exist in any token.
    | A TokenInvalidException will be thrown if any of these claims are not
    | present in the payload.
    |
    */

    'required_claims' => ['iss', 'iat', 'exp', 'nbf', 'sub', 'jti'],

    /*
    |--------------------------------------------------------------------------
    | Blacklist Enabled
    |--------------------------------------------------------------------------
    |
    | In order to invalidate tokens, you must have the blacklist enabled.
    | If you do not want or need this functionality, then set this to false.
    |
    */

    'blacklist_enabled' => env('JWT_BLACKLIST_ENABLED', true),

    /*
    |--------------------------------------------------------------------------
    | Providers
    |--------------------------------------------------------------------------
    |
    | Specify the various providers used throughout the package.
    |
    */

    'providers' => [

        /*
        |--------------------------------------------------------------------------
        | User Provider
        |--------------------------------------------------------------------------
        |
        | Specify the provider that is used to find the user based
        | on the subject claim
        |
        */

        'user' => 'Tymon\JWTAuth\Providers\User\EloquentUserAdapter',

        /*
        |--------------------------------------------------------------------------
        | JWT Provider
        |--------------------------------------------------------------------------
        |
        | Specify the provider that is used to create and decode the tokens.
        |
        */

        'jwt' => 'Tymon\JWTAuth\Providers\JWT\Namshi',

        /*
        |--------------------------------------------------------------------------
        | Authentication Provider
        |--------------------------------------------------------------------------
        |
        | Specify the provider that is used to authenticate users.
        |
        */

        'auth' => 'Tymon\JWTAuth\Providers\Auth\Illuminate',

        /*
        |--------------------------------------------------------------------------
        | Storage Provider
        |--------------------------------------------------------------------------
        |
        | Specify the provider that is used to store tokens in the blacklist
        |
        */

        'storage' => 'Tymon\JWTAuth\Providers\Storage\Illuminate',

    ],

];

config_lighthouse.php

<?php

return [

   /*
    |--------------------------------------------------------------------------
    | LightHouse endpoint & middleware
    |--------------------------------------------------------------------------
    |
    | Setup this values as required,
    | default route endpoints its yourdomain.com/graphql
    | setup middleware here for all request,
    | setup more endpoints, ej: pointing to the controller value inside your route file
    |
    */
    'route_name' => 'graphql',

    'route' => [
        'prefix' => '',
        'middleware' => [ 'auth:api', 'scopes:graphql' ], // [ 'loghttp']
    ],


    /*
    |--------------------------------------------------------------------------
    | Directive registry
    |--------------------------------------------------------------------------
    |
    | This package allows you to create your own server-side directives. Change
    | these values to register the directory that will hold all of your
    | custom directives.
    |
    */
    'directives' => [__DIR__.'/../app/GraphQL/Directives'],

    /*
    |--------------------------------------------------------------------------
    | Namespace registry
    |--------------------------------------------------------------------------
    |
    | This package provides a set of commands to make it easy for you to
    | create new parts in your GraphQL schema. Change these values to
    | match the namespaces you'd like each piece to be created in.
    |
    */
    'namespaces' => [
        'models' => 'App\Models',
        'mutations' => 'App\GraphQL\Mutations',
        'queries' => 'App\GraphQL\Queries',
        'types' => 'App\GraphQL\Types',
        'fields' => 'App\GraphQL\Fields',
        'scalars' => 'App\GraphQL\Scalars',
        'connections' => 'App\GraphQL\Connections',
        'dataloaders' => 'App\GraphQL\DataLoaders',
    ],

     /*
     |--------------------------------------------------------------------------
     | GraphQL Controller
     |--------------------------------------------------------------------------
     |
     | Specify which controller (and method) you want to handle GraphQL requests.
     |
     */
    'controller' => 'Nuwave\Lighthouse\Support\Http\Controllers\GraphQLController@query',

    /*
    |--------------------------------------------------------------------------
    | Schema Cache
    |--------------------------------------------------------------------------
    |
    | Specify where the GraphQL schema should be cached.
    |
    */
    'cache' => null,

    /*
    |--------------------------------------------------------------------------
    | Global ID
    |--------------------------------------------------------------------------
    |
    | When creating a GraphQL type that is Relay compliant, provide a named field
    | for the Node identifier.
    |
    */
    'global_id_field' => 'id',

    /*
    |--------------------------------------------------------------------------
    | Schema declaration
    |--------------------------------------------------------------------------
    |
    | This is a path that points to where your GraphQL schema is located
    | relative to the app path. You should define your entire GraphQL
    | schema in this file (additional files may be imported).
    |
    */
    'schema' => [
        'register' => base_path('app/GraphQL/schema.graphql'),
    ],

    'route_enable_get' => true,

];

config_lighthouse_subscriptions.php

<?php

return [
    /**
     * The port the web socket server
     * will listen on.
     */
    'port' => env('WEBSOCKET_PORT', 8100),

    /**
     * Set your keep alive interval here
     * if your connection requires it.
     */
    'keep_alive' => env('WEBSOCKET_KEEPALIVE', 0),

    /**
     * Set connection storage here.
     */
    'storage' => env('WEBSOCKET_STORAGE', 'memory'),

    /**
     * Set context generator here.
     */
    'context' => env('WEBSOCKET_CONTEXT', 'subscriber'),
];